Skip to content

Feature Charts

D-Command - Pro Tools

Important HUI Metering Information

The HUI protocol provides for stereo track metering. It does not provide for output metering.

Important Insert Editing Information

Pro Tools limits HUI device plug-in editing to the first eight channels of the surface. You can bank and scroll a track to the first eight channels and select a plug-in to edit. Thereafter, you can bank and scroll while editing the plug-in.

Channel Strips
Record Arms the assigned audio track of the Channel.
Select Sets the Channel to the Select state.
Solo Solos the Channel.
Mute Mutes the Channel.
Auto Hold down and press a channel select button to cycle through Automation modes for the selected channel.
Track Meters Displays Stereo metering for tracks.
Pan Assigns pan control to the knobs for all tracks. Press again to toggle to right channel pan for stereo tracks.
Sends Assigns Send Mode to bottom edit row for all tracks. Press and hold to display send destination.
Page Up Cycles through Send A-E assignment.
Page Down Cycles through Send A-E assignment.
BypMute Toggles between Send Mute Mode and Send Pre/Post Mode
Inserts Assign track to upper edit row insert editor. Press again to toggle between Insert Select Mode and Insert Edit Mode
Lower Edit Row Edit Pan and Sends
Knob Adjust track pan, send volume, or send pan for stereo sends
BMP Send Mute Mode - toggle send mute
Send Pre/Post Mode - toggle send pre/post.
Flip Flips send volume to Fader, send mute to Mute.
Upper Edit Row Edit Inserts A-E. Only available for tracks 1-8.
Insert Select Mode
Select 1-4 Select insert to edit
Select 5 Display inserts A-D
Select 6 Display insert E
Insert Edit Mode
Knob 1-8 Adjust plugin parameter values
Select 1-4 Cycle through discrete parameter values
Select 7 Compare
BMP 7 Bypass
Select 8 Page Left
BMP 8 Page Right

Use Inserts button on track to select a track to edit. Only available for tracks 1-8.

Upper Edit Row
Insert Select Mode
Select 1-4 Select insert to edit
Select 5 Display inserts A-D
Select 6 Display insert E
Insert Edit Mode
Knob 1-8 Adjust plugin parameter values
Select 1-4 Cycle through discrete parameter values
Select 7 Compare
BMP 7 Bypass
Select 8 Page Left
BMP 8 Page Right
Automation
Hold down the Automation Mode and press the channel select button to assign that mode to the channel.
Write Assigns Write mode to selected channel.
Read Assigns Read mode to selected channel.
Touch Assigns Touch mode to selected channel.
Latch Assigns Latch mode to selected channel.
Off Sets Automation mode to Off
Auto Suspend Suspends Automation
There is no indication if Automation enables are On/Off
Vol Toggle Enable Volume Automation
Pan Toggle Enable Pan Automation
Mute Toggle Enable Mute Automation
Sends Toggle Enable Sends Automation
EQ Toggle Enable Send Mute Automation
Plugin Toggle Enable Plugin Automation
Transport
Play Starts playhead at current position in Timeline.
Stop Stops playhead at current position in Timeline.
Record Starts Record Mode for playhead
Rewind Move playhead backwards in Timeline.
Fast Forward Moves playhead forward in Timeline.
RTZ Returns playhead to beginning of Timeline.
GTE Sends playhead to end of Timeline.
Mark In Go To Left Locator
Mark Out Go To Right Locator
Loop Play Toggles Loop mode for loop selection in Timeline.
Quick Punch Toggles Punch mode for selection in Timeline.
Counter Displays Counter for current session.
Utility
Save Press the Save button to save.
Shift+ Press Shift + Save button to open the Save As dialog.
Undo Press to undo the last edit.
Window Buttons
Mix Opens Mix Window
Edit Opens Edit Window
Mem Loc Opens Memory Locations Window
Plug-in Opens Plug-in Window for plugin selected in plugin editor
Transport Opens Transport Window
Navigation
Bank Left Banks 8 tracks left.
Bank Right Banks 8 tracks right.
Nudge Left Scrolls 1 track left.
Nudge Right Scrolls 1 track right.
Scrub Enables Scrub mode for the wheel.
Normal Mode - Use Shift at any time to adjust start or end of a selection with wheel.
Edit Start Of Selection - Hold Shift and press Scrub. Use wheel to edit start of selection.
Edit End Of Selection - Hold Shift+Option and press Scrub. Use wheel to edit end of selection.
Shuttle Enables Shuttle Mode for the wheel.
Zoom Enables Zoom mode for the cursor keys.
V-Window Mode
With the V-Window feature, users can instantly control any plug-ins or controls on screen through their control surface's channel strip with a touch of a button.
Master Fader Press once to enable V-Window mode for the 8th channel fader. Press a 2nd time to cycle back to basic channel control.
Mute While in V-Window mode, the Mute button on the last channel strip will cycle through the various V-Window Modes which are listed below:
VButton: Use this mode to interact with button controls. The mouse will stay in its place and activate a button press when the fader is touched.
VButtonSet: Use this mode to create and cycle through different button set points. With the mouse hovering above the on screen button's position press Shift+Solo on the control surface to set a Pin at that location. Using the fader in this mode will cylce between multiple Pins to use with VButton mode.
VWKnob: Use this mode when interacting with knob controls on the plug-ins GUI.
VWHSlider: Use this mode when interacting with horizontal slider controls on the plug-ins GUI.
VWVSlider: Use this mode when interacting with vertically slider controls on the plug-ins GUI.
Solo While in V-Window Mode, pressing the Solo button will pin the mouse location and revert to that location any time the fader is touched. Once the fader is released, the mouse is also returned to that pin position. This way it is very easy to pin a parameter and instantly control it without having to worry with the mouse cursor is on the screen.
Select Use the Select button while in V-Window mode to reset the fader position.
MIDI Mode V-Control MIDI Mode port connects surface as a MIDI controller
MIDI Events List Toggles surface between DAW Mode and MIDI Mode
EQ Section All encoders are assigned to MIDI Mode
Dyn Section All encoders are assigned to MIDI Mode
Top Row Encoders All encoders are assigned to MIDI Mode

D-Command - Logic Pro

Channel Strips
Pan Assigns Pan control to the knobs.
Insert Assigns Plug-in Editor for selected channel across channel knobs. Select plug-in with knob buttons.
Send Assigns Sends for selected channel across channel knobs.
Record Arms the assigned audio track of the Channel.
Solo Solos the Channel.
Mute Mutes the Channel.
Auto Cycles through Automation modes on the select
Input Toggles Input Monitoring for the channel.
Select Sets the Channel to the Select state.
Knob Changes the assigned parameter.
Knob Button Changes the assigned parameter.
Flip Flips knobs to faders.
Softkey/1 Toggles Fine knob mode control.
Track Meters Displays Stereo metering for tracks.
Master Faders Toggles last Channel Fader to be Master Fader
EQ Section
In 1 Toggles Band 1 On/Off.
In 2 Toggles Band 2 On/Off.
In 3 Toggles Band 3 On/Off.
In 4 Toggles Band 4 On/Off.
Freq 1 Adjust Band 1 Frequency.
Freq 2 Adjust Band 2 Frequency.
Freq 3 Adjust Band 3 Frequency.
Freq 4 Adjust Band 4 Frequency.
Gain 1 Adjust Band 1 Gain.
Gain 2 Adjust Band 2 Gain.
Gain 3 Adjust Band 3 Gain.
Gain 4 Adjust Band 4 Gain.
Automation
Read Sets selected Channel in to Read Mode
Write Sets selected Channel to Write Mode
Touch Sets selected Channel to Touch Mode
Latch Sets selected Channel to Latch Mode
Off Sets selected Channel to Off Mode
Volume Toggles Enable for Volume Automation
Pan Toggles Enable for Pan Automation
Mute Toggles Enable for Mute Automation
Send LvL Toggles Enable for Send Level Automation
Plug-In Toggles Enable for Plug-In Automation
Transport
Play Starts playhead at current position in Timeline.
Stop Stops playhead at current position in Timeline.
Record Starts Record Mode for playhead
Rewind Move playhead backwards in Timeline.
Fast Forward Moves playhead forward in Timeline.
RTZ Go To Beginning
GTE Go To End
Pre Roll Count-In
In Set Left Locator
Out Set Right Locator
Shift+In Set Punch In
Shift+Out Set Punch Out
Option+In Go To Left Locator
Option+Out Go To Right Locator
Loop Play Cycle
Quick Punch Autopunch
Audition Replace
Online Click
Scrub Enables Scrub mode for the wheel.
Scroll Enables Scroll mode for the wheel.
Counter Displays Counter for current session.
Utility
Save Press the Save button to save.
Press Shift + Save button to open the Save As dialog.
Undo Press to undo the last edit.
Redo Press to redo edit.
Solo Clear Clears all track Solos in project.
Group Buttons
Suspend Toggles group suspend.
Navigation
Bank Left Banks 8 tracks left.
Bank Right Banks 8 tracks right.
Nudge Left Scrolls 1 track left.
Nudge Right Scrolls 1 track right.
Up Scrolls to next track in Arrangement.
Down Scrolls to previous track in Arrangement.
Left Scroll to previous track in MIxer.
Right Scroll to next track in Mixer.
Zoom Enables Zoom mode for the cursor keys. Left/Right zooms horizontal for the Arrangement window. Up/Down zooms vertical for the Arrangement window.
Window Buttons
Mix Displays Mixer Window
Edit Displays Arrange Window
MemLoc Displays Marker Window
Transport Displays Transport
Status Displays Event Editor
Edit
Copy Copy selected region in Arrange Window
Delete Deletes selected region in Arrange Window
Cut Cuts selected region in Arrange Window
Paste Pastes region in Arrange Window
Modifiers
Shift Enables Shift Modifier.
Option Enables Option Modifier.
Control Enables Control Modifier.
Command Enables Command Modifier.
V-Window Mode
With the V-Window feature, users can instantly control any plug-ins or controls on screen through their control surface's channel strip with a touch of a button.
Master Fader Press once to enable V-Window mode for the 8th channel fader. Press a 2nd time to cycle back to basic channel control.
Mute While in V-Window mode, the Mute button on the last channel strip will cycle through the various V-Window Modes which are listed below:
VButton: Use this mode to interact with button controls. The mouse will stay in its place and activate a button press when the fader is touched.
VButtonSet: Use this mode to create and cycle through different button set points. With the mouse hovering above the on screen button's position press Shift+Solo on the control surface to set a Pin at that location. Using the fader in this mode will cylce between multiple Pins to use with VButton mode.
VWKnob: Use this mode when interacting with knob controls on the plug-ins GUI.
VWHSlider: Use this mode when interacting with horizontal slider controls on the plug-ins GUI.
VWVSlider: Use this mode when interacting with vertically slider controls on the plug-ins GUI.
Solo While in V-Window Mode, pressing the Solo button will pin the mouse location and revert to that location any time the fader is touched. Once the fader is released, the mouse is also returned to that pin position. This way it is very easy to pin a parameter and instantly control it without having to worry with the mouse cursor is on the screen.
Select Use the Select button while in V-Window mode to reset the fader position.
MIDI Mode V-Control MIDI Mode port connects surface as a MIDI controller
MIDI Events List Toggles surface between DAW Mode and MIDI Mode
EQ Section All encoders are assigned to MIDI Mode
Dyn Section All encoders are assigned to MIDI Mode
Top Row Encoders All encoders are assigned to MIDI Mode

D-Command - Studio One / Fender Studio

Channel Strips
Pan Assigns Pan control to the knobs.
Insert Assigns Plug-in Editor for selected channel across channel knobs. Select plug-in with knob buttons.
Send Assigns Sends to knobs. Press repeatedly to cycle through additional sends.
Record Arms the assigned audio track of the Channel.
Solo Solos the Channel.
Mute Mutes the Channel.
Auto Cycles through Automation modes on the select
Insert Assigns plug-in editing to the knobs. Assign parameters using the Control Link feature in Studio One.
Select Sets the Channel to the Select state.
Knob Changes the assigned parameter.
Knob Button Changes the assigned parameter.
Track Meters Displays Mono metering for tracks.
Flip Flips knobs to faders.
Master Faders Toggles last Channel Fader to be Master Fader
Automation
Read Sets selected Channel in to Read Mode
Write Sets selected Channel to Write Mode
Touch Sets selected Channel to Touch Mode
Latch Sets selected Channel to Latch Mode
Off Sets selected Channel to Off Mode
Transport
Play Starts playhead at current position in Timeline.
Stop Stops playhead at current position in Timeline.
Record Starts Record Mode for playhead
Rewind Move playhead backwards in Timeline.
Fast Forward Moves playhead forward in Timeline.
RTZ Go To Beginning
Loop Play Cycle
Quick Punch Autopunch
Navigate Toggles Marker Mode. Use Rewind and Fast Forward to navigate between Markers. Press Record to insert marker.
Audition Toggles Click
Scrub Enables Scrub mode for the wheel.
Scroll Enables Scroll mode for the wheel.
Counter Displays Counter for current session.
Utility
Save Press the Save button to save.
Press Shift + Save button to open the Save As dialog.
Undo Press to undo the last edit.
Redo Press to redo edit.
Solo Clear Clears all track Solos in project.
Group Buttons
Suspend Toggles group suspend.
Navigation
Bank Left Banks 8 tracks left.
Bank Right Banks 8 tracks right.
Nudge Left Scrolls 1 track left.
Nudge Right Scrolls 1 track right.
Up Scrolls to next track in Arrangement.
Down Scrolls to previous track in Arrangement.
Left Scroll to previous track in MIxer.
Right Scroll to next track in Mixer.
Zoom Enables Zoom mode for the cursor keys. Left/Right zooms horizontal for the Arrangement window. Up/Down zooms vertical for the Arrangement window.
Window Button
Mix Show/Hide the MIxer
Soft Keys
F1
F2
F3
F4
F5
F6
F7
F8
Edit
Copy Copy selected region in Arrange Window
Delete Deletes selected region in Arrange Window
Cut Cuts selected region in Arrange Window
Paste Pastes region in Arrange Window
Modifiers
Shift Enables Shift Modifier.
Option Enables Option Modifier.
Control Enables Control Modifier.
Command Enables Command Modifier.
V-Window Mode
With the V-Window feature, users can instantly control any plug-ins or controls on screen through their control surface's channel strip with a touch of a button.
Master Fader Press once to enable V-Window mode for the 8th channel fader. Press a 2nd time to cycle back to basic channel control.
Mute While in V-Window mode, the Mute button on the last channel strip will cycle through the various V-Window Modes which are listed below:
VButton: Use this mode to interact with button controls. The mouse will stay in its place and activate a button press when the fader is touched.
VButtonSet: Use this mode to create and cycle through different button set points. With the mouse hovering above the on screen button's position press Shift+Solo on the control surface to set a Pin at that location. Using the fader in this mode will cylce between multiple Pins to use with VButton mode.
VWKnob: Use this mode when interacting with knob controls on the plug-ins GUI.
VWHSlider: Use this mode when interacting with horizontal slider controls on the plug-ins GUI.
VWVSlider: Use this mode when interacting with vertically slider controls on the plug-ins GUI.
Solo While in V-Window Mode, pressing the Solo button will pin the mouse location and revert to that location any time the fader is touched. Once the fader is released, the mouse is also returned to that pin position. This way it is very easy to pin a parameter and instantly control it without having to worry with the mouse cursor is on the screen.
Select Use the Select button while in V-Window mode to reset the fader position.
MIDI Mode V-Control MIDI Mode port connects surface as a MIDI controller
MIDI Events List Toggles surface between DAW Mode and MIDI Mode
EQ Section All encoders are assigned to MIDI Mode
Dyn Section All encoders are assigned to MIDI Mode
Top Row Encoders All encoders are assigned to MIDI Mode

D-Command - Cubase/Nuendo

Channel Strips
Pan Assigns Pan control to the knobs.
Insert Assigns Plug-in Editor for selected channel across channel knobs. Select plug-in with knob buttons.
Send Assigns Sends to knobs for selected channel.
Record Arms the assigned audio track of the Channel.
Solo Solos the Channel.
Mute Mutes the Channel.
Auto Cycles through Automation modes on the select
Insert Assigns Insert Editor to knobs to selected channel.
Knob 1 Designates which insert.
Knob 2 Toggles bypass for insert.
Knob 3 Selects Insert
Select Sets the Channel to the Select state.
Knob Changes the assigned parameter.
Knob Button Changes the assigned parameter.
Track Meters Displays Mono metering for tracks.
Flip Flips knobs to faders.
Master Faders Toggles last Channel Fader to be Master Fader
Automation
Write Toggles Write automation for all channels.
Read Toggles Read automation for all channels.
Touch Sets Automation to Touch automation for all channels.
Latch Sets Automation to Latch mode for all channels.
Off Sets Automation to Cross-over mode for all channels.
Auto Suspend Suspends Automation
There is no indication if Automation enables are On/Off
Vol Toggle Enable Volume Automation
Pan Toggle Enable Pan Automation
Mute Toggle Enable Mute Automation
Sends Toggle Enable Sends Automation
EQ Toggle Enable Send Mute Automation
Plugin Toggle Enable Plugin Automation
Transport
Play Starts playhead at current position in Timeline.
Stop Stops playhead at current position in Timeline.
Record Starts Record Mode for playhead
Rewind Move playhead backwards in Timeline.
Fast Forward Moves playhead forward in Timeline.
RTZ Returns playhead to beginning of Timeline.
GTE Sends playhead to end of Timeline.
Pre Roll Enables Pre Roll
Post Roll Enables Post Roll
Mark In Go To Left Locator
Mark Out Go To Right Locator
Loop Play/Loop Rec Toggles Loop mode for loop selection in Timeline.
Quick Punch Toggles Punch mode for selection in Timeline.
Counter Displays Counter for current session.
Utility
Save Press the Save button to save.
Press Shift + Save button to open the Save As dialog.
Undo Press to undo the last edit.
Window Buttons
Mix Opens MixConsole Window
WinCfg Opens Status Window
Memloc Opens Memory Locator Window
Navigation
Bank Left Banks 8 tracks left.
Bank Right Banks 8 tracks right.
Nudge Left Scrolls 1 track left.
Nudge Right Scrolls 1 track right.
There are several different modes available for the cursor keys and wheel.
Navigate Enables Wheel and cursor to default mode.
Scrub Enables Scrub mode for the wheel.
Shuttle Enables Shuttle Mode for the wheel.
Zoom Enables Zoom mode for the wheel and cursor keys.
Zoom+Shift Enables Track Zoom for the wheel and cursor keys. Track zoom increases/decreases track height.
Zoom+Option Enables Wave Zoom for the wheel and cursor keys. Wave zoom increases waveform view in region.
Zoom+Control Enables Nudge trim mode for the wheel and cursor keys. Use Left/Right cursor keys to change between start/end of region. Use Up/Down cursor keys or wheel to trim.
V-Window Mode
With the V-Window feature, users can instantly control any plug-ins or controls on screen through their control surface's channel strip with a touch of a button.
Master Fader Press once to enable V-Window mode for the 8th channel fader. Press a 2nd time to cycle back to basic channel control.
Mute While in V-Window mode, the Mute button on the last channel strip will cycle through the various V-Window Modes which are listed below:
VButton: Use this mode to interact with button controls. The mouse will stay in its place and activate a button press when the fader is touched.
VButtonSet: Use this mode to create and cycle through different button set points. With the mouse hovering above the on screen button's position press Shift+Solo on the control surface to set a Pin at that location. Using the fader in this mode will cylce between multiple Pins to use with VButton mode.
VWKnob: Use this mode when interacting with knob controls on the plug-ins GUI.
VWHSlider: Use this mode when interacting with horizontal slider controls on the plug-ins GUI.
VWVSlider: Use this mode when interacting with vertically slider controls on the plug-ins GUI.
Solo While in V-Window Mode, pressing the Solo button will pin the mouse location and revert to that location any time the fader is touched. Once the fader is released, the mouse is also returned to that pin position. This way it is very easy to pin a parameter and instantly control it without having to worry with the mouse cursor is on the screen.
Select Use the Select button while in V-Window mode to reset the fader position.
MIDI Mode V-Control MIDI Mode port connects surface as a MIDI controller
MIDI Events List Toggles surface between DAW Mode and MIDI Mode
EQ Section All encoders are assigned to MIDI Mode
Dyn Section All encoders are assigned to MIDI Mode
Top Row Encoders All encoders are assigned to MIDI Mode

D-Command - MixBus

Channel Strips
Pan Assigns Pan control to the knobs.
Insert Assigns Plug-in Editor for selected channel across channel knobs. Select plug-in with knob buttons.
Send Assigns Sends to knobs. Press repeatedly to cycle through additional sends.
Record Arms the assigned audio track of the Channel.
Solo Solos the Channel.
Mute Mutes the Channel.
Auto Cycles through Automation modes on the select
Insert Assigns plug-in editing to the knobs. Assign parameters using the Control Link feature in Studio One.
Select Sets the Channel to the Select state.
Knob Changes the assigned parameter.
Knob Button Changes the assigned parameter.
Track Meters Displays Mono metering for tracks.
Flip Flips knobs to faders.
Master Faders Toggles last Channel Fader to be Master Fader
Automation
Read Sets selected Channel in to Play Mode
Write Sets selected Channel to Write Mode
Touch Sets selected Channel to Touch Mode
Off Sets selected Channel to Manual Mode
Transport
Play Starts playhead at current position in Timeline.
Stop Stops playhead at current position in Timeline.
Record Starts Record Mode for playhead
Rewind Move playhead backwards in Timeline.
Fast Forward Moves playhead forward in Timeline.
RTZ Go To Beginning
GTE Go To End
Loop Play Cycle
Quick Punch Autopunch
Navigate Toggles Marker Mode. Use Rewind and Fast Forward to navigate between Markers. Press Record to insert marker.
Audition Toggles Click
Scrub Enables Scrub mode for the wheel.
Scroll Enables Scroll mode for the wheel.
Counter Displays Counter for current session.
Utility
Save Press the Save button to save.
Press Shift + Save button to open the Save As dialog.
Undo Press to undo the last edit.
Redo Press to redo edit.
Solo Clear Clears all track Solos in project.
Group Buttons
Suspend Toggles group suspend.
Navigation
Bank Left Banks 8 tracks left.
Bank Right Banks 8 tracks right.
Nudge Left Scrolls 1 track left.
Nudge Right Scrolls 1 track right.
Up Scrolls to next track in Arrangement.
Down Scrolls to previous track in Arrangement.
Left Scroll to previous track in MIxer.
Right Scroll to next track in Mixer.
Zoom Enables Zoom mode for the cursor keys. Left/Right zooms horizontal for the Arrangement window. Up/Down zooms vertical for the Arrangement window.
Window Button
Mix Show/Hide the MIxer
Soft Keys
F1
F2
F3
F4
F5
F6
F7
F8
Edit
Copy Copy selected region in Arrange Window
Delete Deletes selected region in Arrange Window
Cut Cuts selected region in Arrange Window
Paste Pastes region in Arrange Window
Modifiers
Shift Enables Shift Modifier.
Option Enables Option Modifier.
Control Enables Control Modifier.
Command Enables Command Modifier.
V-Window Mode
With the V-Window feature, users can instantly control any plug-ins or controls on screen through their control surface's channel strip with a touch of a button.
Master Fader Press once to enable Master Fader control. Press a second time to enable V-Window mode for the last channel fader. Press a 3rd time to cycle back to basic channel control.
Mute While in V-Window mode, the Mute button on the last channel strip will cycle through the various V-Window Modes which are listed below:
VButton: Use this mode to interact with button controls. The mouse will stay in its place and activate a button press when the fader is touched.
VButtonSet: Use this mode to create and cycle through different button set points. With the mouse hovering above the on screen button's position press Shift+Solo on the control surface to set a Pin at that location. Using the fader in this mode will cylce between multiple Pins to use with VButton mode.
VWKnob: Use this mode when interacting with knob controls on the plug-ins GUI.
VWHSlider: Use this mode when interacting with horizontal slider controls on the plug-ins GUI.
VWVSlider: Use this mode when interacting with vertically slider controls on the plug-ins GUI.
Solo While in V-Window Mode, pressing the Solo button will pin the mouse location and revert to that location any time the fader is touched. Once the fader is released, the mouse is also returned to that pin position. This way it is very easy to pin a parameter and instantly control it without having to worry with the mouse cursor is on the screen.
Select Use the Select button while in V-Window mode to reset the fader position.
MIDI Mode V-Control MIDI Mode port connects surface as a MIDI controller
MIDI Events List Toggles surface between DAW Mode and MIDI Mode
EQ Section All encoders are assigned to MIDI Mode
Dyn Section All encoders are assigned to MIDI Mode
Top Row Encoders All encoders are assigned to MIDI Mode

C24 - Pro Tools

Important HUI Metering Information

The HUI protocol provides for stereo track metering. It does not provide for output metering. Pro Tools will not provide track metering if Eucon is enabled. Disable Eucon for track metering.

Important Insert Editing Information

Pro Tools limits HUI device plug-in editing to the first eight channels of the surface. You can bank and scroll a track to the first eight channels and select a plug-in to edit. Thereafter, you can bank and scroll while editing the plug-in.

Channel Strip
Record Arms the assigned audio track of the Channel (LED flashes when record-ready, lit when recording).
Option+ Record-enables all tracks (when pressed on non-enabled track).
Option+ Disables all tracks for recording (when pressed on enabled track).
Option+Shift+ Record-enables selected tracks only.
Alt+ Enables or clears Record Safe mode on channel (LED flashes briefly).
Option+Alt+ Enables or clears Record Safe on all channels.
Shift+Option+Alt+ Enables or clears Record Safe on selected channels only.
Insert Enables insert editor for selected Channel.
Double-click Directly accesses first assigned insert for editing.
Multiple double-clicks Cycles through inserts on channel.
Bypass+ Bypasses or enables all plug-ins on all inserts for channel (when Bypass mode enabled).
Bypass+Option+ Bypasses plug-ins on all channels (when Bypass mode enabled).
Solo Solos the Channel (LED lights when enabled).
Option+ Enables or clears solos on all channels.
Option+Shift+ Enables or clears solos on all selected channels.
Alt+ Enables or clears Solo Safe mode on channel (LED flashes briefly).
Option+Alt+ Enables or clears Solo Safe on all channels.
Shift+Option+Alt+ Enables or clears Solo Safe on selected channels only.
Mute Mutes the Channel (LED lights when enabled).
Option+ Enables or clears mutes on all channels.
Option+Shift+ Enables or clears mutes on all selected channels.
Auto Press to see auto mode displayed in place of track name.
+AUTOMATION MODES Hold down and select automation mode (WRITE, TOUCH, LATCH, TRIM, READ, OFF).
+Select Hold down and press channel select button to cycle through automation modes.
Option+Automation mode Changes automation mode on all channels.
Option+Shift+Automation mode Changes automation mode on all selected channels.
Select Selects track (LED lights when selected).
Shift+ Deselects single channel OR selects/deselects multiple channels.
Option+ Selects or deselects all channels.
Alt+ Changes SELECT state of channel and changes all others to opposite state (on lit switch).
Default+ Reset fader to 0 db.
Default+Option+ Reset all faders to 0 db.
Default+Option+Shift+ Reset all selected faders to 0 db.
Knob Adjust control assigned for bank mode.
Pan Mode - Adjust stereo pan for mono and stereo tracks.
Send A-E Modes - Adjust send volume.
Flip Send A-E Modes - Adjust send pan for mono/stereo sends.
Insert Edit Mode - Adjust plugin parameter for strips 1-8.
Cmd+ Fine mode (fine adjustments).
Alt+ Fine adjustments for Knob controls.
Knob Button Default+ Pan Mode - Reset pan to default
Send Mute Mode - Control send mute
Pre/Post Mode - Control send pre/post.
Insert Select Mode - Select insert A-D, E for strips 1-4.
Insert Edit Mode - Adjust discrete parameter for strips 1-4.
Option+ Toggles send pre/post for all channels (in Send mode).
Option+Shift+ Toggles send pre/post for all selected channels (in Send mode).
Default+ Returns channel's send level or pan to default.
Default+Option+ Returns all channel send levels/pans to default.
Default+Option+Shift+ Returns all selected channel send levels/pans to default.
Fader Track volume control.
Ctrl+ Clutch mode - disengages faders from Mix groups while held.
Meters Displays stereo metering for tracks.

Buttons are used to set a bank mode which assign controls to the Knobs.

PAN
PAN Enables pan control on Knobs.
Press twice On stereo channels, edits right channel pan.
LCR,FrontRear,Rear,Divergence,Center,LFE,LR Stereo Pan Mode for mono / stereo tracks
Toggle between Pan L and Pan R for stereo tracks
Toggle between Pan L and Pan R for stereo sends when in send mode
SENDS
A Send A Mode - enables send level control on Knobs for Send A.
Assign+ Enters assign mode for send routing.
Insert+ Quick access to send level editing.
B Send B Mode - enables send level control on Knobs for Send B.
C Send C Mode - enables send level control on Knobs for Send C.
D Send D Mode - enables send level control on Knobs for Send D.
E Send E Mode - enables send level control on Knobs for Send E.
Flip
Flip Enters Flip mode (LED flashes).
Send levels mapped to faders.
Send pan controls mapped to Knobs.
Send mutes mapped to MUTE switches.
V-SEL controls send pre/post operation.
SWITCH FUNCTIONS
Pre/Post Sets knob buttons to Pre/Post mode when in Sends Mode.
Send Mute Sets knob buttons to Send Mute mode when in Sends Mode.
ASSIGN
Input Enters assign mode for input routing.
Assign+ Enters assign mode for input routing.
Output Enters assign mode for output routing.
Assign+ Enters assign mode for output routing.
Ctrl+Assign Confirms additional output assignment (during output assign).
AUTOMATION MODES
Hold down channel strip Auto button to select automation modes.
Read Sets selected Channel to Read Mode (AUTO LED green).
Option+ Arms all channels for Read mode.
Option+Shift+ Arms all selected channels for Read mode.
Write Sets selected Channel to Write Mode (AUTO LED red flashing/lit).
Option+ Arms all channels for Write mode.
Option+Shift+ Arms all selected channels for Write mode.
Touch Sets selected Channel to Touch Mode (AUTO LED red flashing/lit).
Option+ Arms all channels for Touch mode.
Option+Shift+ Arms all selected channels for Touch mode.
Latch Sets selected Channel to Latch Mode (AUTO LED red flashing/lit).
Option+ Arms all channels for Latch mode.
Option+Shift+ Arms all selected channels for Latch mode.
Trim Toggles TRIM mode on/off for track (TDM only).
Alt+ Displays trim delta value instead of absolute value (while adjusting).
Option+ Arms all channels for Trim mode.
Option+Shift+ Arms all selected channels for Trim mode.
Off Disables automation on channel (AUTO LED off).
Option+ Disables automation on all channels.
Option+Shift+ Disables automation on all selected channels.
AUTO ENABLES
Volume Enables automation for fader.
Option+ Toggles all automation parameters to this state.
Alt+ Changes FADER state and sets other five to opposite.
Pan Enables automation for pan (enables both channel and send pan if both disabled).
Option+ Toggles all automation parameters to this state.
Alt+ Changes PAN state and sets other five to opposite.
Mute Enables automation for mute.
Option+ Toggles all automation parameters to this state.
Alt+ Changes MUTE state and sets other five to opposite.
Send LvL Enables automation for send.
Option+ Toggles all automation parameters to this state.
Alt+ Changes SEND state and sets other five to opposite.
Plug-In Enables automation for plug-ins.
Option+ Toggles all automation parameters to this state.
Alt+ Changes PLUG IN state and sets other five to opposite.
Send Mute Enables automation for send mute.
Option+ Toggles all automation parameters to this state.
Alt+ Changes SEND MUTE state and sets other five to opposite.
AUTO WRITE TO
Start Write to Start (writes automation from insertion point backward to beginning).
Same as Ctrl + RTZ.
Ctrl+Option+ Suppresses warning dialog for Write to Start.
End Write to End (writes automation from insertion point forward to end).
Same as Ctrl + END.
Ctrl+Option+ Suppresses warning dialog for Write to End.
All Write to All (writes automation to entire selection/track).
Same as Ctrl+Shift + RTZ or END.
Transport
Play Begins playback from current cursor position.
Shift+ Initiates half-speed playback.
Stop Stops playback or recording.
Shift+ Aborts the current record pass.
Record Arms Pro Tools for recording (LED flashes).
Ctrl+ Cycles through record modes (normal, QuickPunch, Loop).
Rewind Rewinds the session from current cursor position (incremental or continuous depending on preferences).
Shift+ Return-to-Zero (same as RTZ button).
Fast Forward Fast-forwards the session from current cursor position (incremental or continuous).
Shift+ Go-To-End (same as END button).
RTZ Sets playback cursor to the beginning of the session.
Ctrl+ Write to Start (writes automation from insertion point backward to beginning).
Ctrl+Shift+ Write to All (writes automation to entire selection/track).
Ctrl+Option+ Suppresses warning dialog for Write to Start.
GTE Sets playback cursor to the end of the session.
Ctrl+ Write to End (writes automation from insertion point forward to end).
Ctrl+Shift+ Write to All (writes automation to entire selection/track).
Ctrl+Option+ Suppresses warning dialog for Write to End.
Pre Roll Activates pre-roll.
Alt+ Enters pre-roll time value (numeric entry mode).
Post Roll Activates post-roll.
Alt+ Enters post-roll time value (numeric entry mode).
Mark In Marks In edit point during playback / Sets start point of selection in Timeline.
Alt+ Manually enters selection start time.
Option+Left Arrow Centers left side of waveform selection in Edit Window.
Mark Out Marks Out edit point during playback / Sets end point of selection in Timeline.
Alt+ Manually enters selection end time.
Option+Right Arrow Centers right side of waveform selection in Edit Window.
Loop Play Toggles Loop Playback mode (LED lit when enabled).
Ctrl+ Places Pro Tools into Loop Record mode.
Loop Record Enables Loop Record.
Quick Punch Toggles QuickPunch recording mode (LED lit when enabled).
Audition Press with PRE/POST/IN/OUT to play audio; playback continues until pressed again.
Alt+Option+PRE Plays audio from pre-roll point through selection start plus post-roll.
Alt+Option+IN Plays audio from pre-roll point through selection start plus post-roll.
Alt+Option+OUT Plays audio from before selection end (pre-roll) through selection end plus post-roll.
Alt+Option+POST Plays audio from before selection end (pre-roll) through selection end plus post-roll.
Online Places Pro Tools online or offline (LED lit when online).
Ctrl+ Cycles through available machine master choices (Pro Tools, Serial Machine, ADAT).
Scrub Enables Scrub mode (rotate wheel to scrub forward/backward).
Option+ Begins scrubbing from selection end point.
Alt+ Fixed "fine scrub" resolution regardless of zoom level (while scrubbing).
Shift+ Creates selection using scrub wheel (starts at current position).
Shift+Option+ Modifies end of existing selection.
Left/Right Arrow Moves to selection start/end (during scrub).
Shuttle Enables Shuttle mode (rotate wheel to shuttle forward/backward).
Option+ Begins shuttling from selection end point.
Shift+ Creates selection using shuttle wheel.
Shift+Option+ Modifies end of existing selection.
Left/Right Arrow Moves to selection start/end (during shuttle).
Counter Displays Counter for current session. Counter mode can be changed in DAW.
Master Record Toggles all enabled REC/RDY switches on and off.
Channel Strip
Insert Normal Mode - Assign track to insert editor
Insert Bypass Mode - Bypass all inserts on track
Insert Bypass
Insert Bypass Enables Master Bypass mode (INSERT switches become bypass switches).
+Insert Toggles bypass for all plug-ins on channel (when Bypass mode enabled).
+Option+Insert Changes bypass status of all plug-ins on all channels (when Bypass mode enabled).
+Option+Shift+Insert Changes bypass status on all selected channels (when Bypass mode enabled).
INSERTS
Params Toggles between Insert Display mode (LED off) and Parameter mode (LED lit).
Option+ Toggles display brightness (4 levels).
Master Bypass Bypass selected plug-in on track.
In Parameter mode: Engages Master Bypass for selected plug-in (LED lights).
Compare Compares current plug-in setting with previous (must have plug-in visible on-screen).
Default+ Returns plug-in to factory/user default setting.
CHANNEL BAR SCROLL
Left In Insert mode: Toggles display between Inserts #1-4 and Insert #5.
In Parameter mode: Cycles through plug-in control parameter pages (previous page).
Right In Insert mode: Toggles display between Inserts #1-4 and Insert #5.
In Parameter mode: Cycles through plug-in control parameter pages (next page).
Group Buttons
Create Creates group from selected channels (use Shift+Select on multiple channels first).
Suspend Suspends all Mix groups temporarily (LED flashes when enabled).
Status Shows Group ID status.
Utility
Save Press once to arm save, press again to complete save (LED flashes when armed).
Shift+ Opens Save As dialog.
F8/ESC Aborts the save process.
Undo Undo or Redo last edit operation (LED lit when Undo available, flashes when Redo available).
Cancel Cancel selection / Serves as Escape to cancel any assignment mode or on-screen modal dialog.
Solo Clear Clears all Solos on Channel Strip.
Navigation
Bank Left Swaps channels left eight at a time.
Option+ Banks to far-left position in session.
Bank Right Swaps channels right eight at a time.
Option+ Banks to far-right position in session.
Channel Left Scrolls channels left one at a time.
Option+ Scrolls to far-left position.
Channel Right Scrolls channels right one at a time.
Option+ Scrolls to far-right position.
Nudge Toggles Nudge mode On/Off (Bank Left/Right scroll 1 track when enabled).
Zoom Cycles through three modes: Navigation (LED off), Zoom (LED lit), Selection (LED flashing).
Navigation Mode (LED off):
Up Moves edit cursor or selection to previous track (marks in/out).
Shift+ Extends edit selection to previous track.
Alt+ Scrolls frontmost window upward.
Alt+Option+ Scrolls to top of session (Edit window).
Down Moves edit cursor or selection to next track (marks in/out).
Shift+ Extends edit selection to next track.
Alt+ Scrolls frontmost window downward.
Alt+Option+ Scrolls to bottom of session (Edit window).
Left Moves edit cursor to previous region boundary or sync point.
Shift+ Extends selection to preceding region boundary.
Option+ Centers left side of waveform selection in Edit Window.
Alt+ Scrolls frontmost window to the left (one page).
Alt+Option+ Scrolls to beginning of session (Edit window).
Ctrl+ Selects previous region.
Ctrl+Shift+ Extends selection to include previous region.
Right Moves edit cursor to next region boundary or sync point.
Shift+ Extends selection to forward region boundary.
Option+ Centers right side of waveform selection in Edit Window.
Alt+ Scrolls frontmost window to the right (one page).
Alt+Option+ Scrolls to end of session (Edit window).
Ctrl+ Selects next region.
Ctrl+Shift+ Extends selection to include next region.
Zoom Mode (LED lit):
Left Decreases horizontal zoom.
Right Increases horizontal zoom.
Up Increases vertical zoom.
Down Decreases vertical zoom.
Selection Mode (LED flashing):
Left Adjusts selection in-point with Scrub/Shuttle wheel.
Double-click Positions cursor at selection's left edge.
+Right+Wheel Adjusts selection time position while retaining duration.
Right Adjusts selection out-point with Scrub/Shuttle wheel.
Double-click Positions cursor at selection's right edge.
+Left+Wheel Adjusts selection time position while retaining duration.
Up Moves selection to previous track.
Shift+ Extends selection to previous track.
Option+ Removes selection from topmost track.
Down Moves selection to next track.
Shift+ Extends selection to next track.
Option+ Removes selection from bottommost track.
Window Buttons
Mix Brings Mix window to foreground (LED lights when active).
Edit Brings Edit window to foreground (LED lights when active).
MemLoc Opens or closes the Memory Locations window.
Transport Opens or closes the Transport window.
Plug-In Opens or closes the floating window for currently selected plug-in.
Status Opens or closes the Session Setup window.
V-Window Mode
With the V-Window feature, users can instantly control any plug-ins or controls on screen through their control surface's channel strip with a touch of a button.
Master Fader Press once to enable V-Window mode for the 24th channel fader. Press a 2nd time to cycle back to basic channel control.
Mute While in V-Window mode, the Mute button on the last channel strip will cycle through the various V-Window Modes which are listed below:
VButton: Use this mode to interact with button controls. The mouse will stay in its place and activate a button press when the fader is touched.
VButtonSet: Use this mode to create and cycle through different button set points. With the mouse hovering above the on screen button's position press Shift+Solo on the control surface to set a Pin at that location. Using the fader in this mode will cylce between multiple Pins to use with VButton mode.
VWKnob: Use this mode when interacting with knob controls on the plug-ins GUI.
VWHSlider: Use this mode when interacting with horizontal slider controls on the plug-ins GUI.
VWVSlider: Use this mode when interacting with vertically slider controls on the plug-ins GUI.
Solo While in V-Window Mode, pressing the Solo button will pin the mouse location and revert to that location any time the fader is touched. Once the fader is released, the mouse is also returned to that pin position. This way it is very easy to pin a parameter and instantly control it without having to worry with the mouse cursor is on the screen.
Select Use the Select button while in V-Window mode to reset the fader position.
MIDI Mode
MIDI Mode converts the surfaces faders, knobs, and buttons into assignable MIDI Controls that can be mapped in the DAW.
Focus Toggles surface between DAW Mode and MIDI Mode

C24 - Logic Pro

Channel Strips
EQ Assigns EQ editor for selected channel across channel knobs. Use Channel Bar Scroll buttons to access additional parameters.
Insert Assigns Plug-in Editor for selected channel across channel knobs. Select plug-in with knob buttons.
Send Assigns Sends for selected channel across channel knobs.
Record Arms the assigned audio track of the Channel.
Solo Solos the Channel.
Mute Mutes the Channel.
Auto Cycles through Automation modes on the select
Input Toggles Input Monitoring for the channel.
Select Sets the Channel to the Select state.
Knob Changes the assigned parameter.
Knob Button Changes the assigned parameter.
Track Meters Displays Stereo metering for tracks.
Bank Mode
The assignment buttons are used to assign controls to the Knobs.
Pan (Default) Assigns Pan to knobs.
Send A Assigns Send 1 to knobs. Assigns Send 6 to knobs when F-J is enabled. Use Channel Bar Scroll Left and Right to switch parameters.
Send B Assigns Send 2 to knobs. Assigns Send 7 to knobs when F-J is enabled. Use Channel Bar Scroll Left and Right to switch parameters.
Send C Assigns Send 3 to knobs. Assigns Send 8 to knobs when F-J is enabled. Use Channel Bar Scroll Left and Right to switch parameters.
Send D Assigns Send 4 to knobs. Use Channel Bar Scroll Left and Right to switch parameters.
Send E Assigns Send 5 to knobs. Use Channel Bar Scroll Left and Right to switch parameters.
F-J Toggles between Sends 1-5 and 6-8 for Send A-E buttons.
Input Shows Channel Inputs across LCD
Output Shows Channel Outputs across LCD.
Assign Enables knobs to change source or destination for Sends, Input, or Output mode. Use knob button to confirm selection.
PrePost Sets knob buttons to PrePost mode when in Sends Mode.
Send Mute Sets knob buttons to Send Mute mode when in Sends Mode.
Flip Flips knobs to faders.
Master Faders Toggles last Channel Fader to be Master Fader
Automation
Read Sets selected Channel in to Read Mode
Write Sets selected Channel to Write Mode
Touch Sets selected Channel to Touch Mode
Latch Sets selected Channel to Latch Mode
Off Sets selected Channel to Off Mode
Volume Toggles Enable for Volume Automation
Pan Toggles Enable for Pan Automation
Mute Toggles Enable for Mute Automation
Send LvL Toggles Enable for Send Level Automation
Plug-In Toggles Enable for Plug-In Automation
Transport
Play Starts playhead at current position in Timeline.
Stop Stops playhead at current position in Timeline.
Record Starts Record Mode for playhead
Rewind Move playhead backwards in Timeline.
Fast Forward Moves playhead forward in Timeline.
RTZ Moves playhead to beginning of Timeline.
Shift+RTZ Moves playhead to end of Timeline.
Pre Roll Enables Count-In
In Sets start point of selection in Timeline.
Out Sets end point of selection in Timeline.
Shift+In Sets drop start point of selection in Timeline.
Shift+Out Sets drop end point of selection in Timeline.
Option+In Goest to start of loop region.
Option+Out Goes to end of loop region.
Loop Play/Loop Rec Toggles Loop mode for loop selection in Timeline.
Quick Punch Toggles Punch mode for selection in Timeline.
Audition Toggles Replace
Dyn Trans Toggles Metronome
Counter Mode Select Changes Counter Mode in Counter LCD.
Counter Displays Counter for current session.
Automatic TalkBack This C24 feature is supported. Enable/disable on C24 by pressing Utility button.
Utility
Save Press the Save button to save.
Press Shift + Save button to open the Save As dialog.
Undo Press to undo the last edit.
Redo Press to redo edit.
Enter Confirm selection
Cancel Cancel selection
Solo Clear Clears all track Solos in project.
Group Buttons
Suspend Toggles group suspend.
Navigation
Bank Left Banks 24 tracks left/Scrolls 1 track left in Nudge mode
Bank Right Banks 24 tracks right/Scrolls 1 track right in Nudge mode
Nudge Toggles Nudge mode On/Off
Up Scrolls to next track in Arrangement.
Down Scrolls to previous track in Arrangement.
Left Scroll to previous track in MIxer.
Right Scroll to next track in Mixer.
Zoom Enables Zoom mode for the cursor keys. Left/Right zooms horizontal for the Arrangement window. Up/Down zooms vertical for the Arrangement window.
Navigate Enables Marker Mode for the cursor keys. Left/Right navigate between marker, Down creates marker at playhead position.
Plug-in Buttons
Master Bypass Bypass selected plug-in on Channel.
Params Show plug-in parameters for selected plug-in on Channel. Press again to display plug-ins on channel across LCD.
Window Buttons
Mix Displays Mixer Window
Edit Displays Arrange Window
MemLoc Displays Marker Window
Transport Displays Transport
WinCfg Displays Event Editor
Zoom Preset 1 Displays Screenset 1
Zoom Preset 2 Displays Screenset 2
Zoom Preset 3 Displays Screenset 3
Zoom Preset 4 Displays Screenset 4
Zoom Preset 5 Displays Screenset 5
Edit
Copy Copy selected region in Arrange Window
Copy+Shift Deletes selected region in Arrange Window
Copy+Option Cuts selected region in Arrange Window
Paste Pastes region in Arrange Window
Modifiers
Shift Enables Shift Modifier.
Option Enables Option Modifier.
Control Enables Control Modifier.
Command Enables Command Modifier.
V-Window Mode
With the V-Window feature, users can instantly control any plug-ins or controls on screen through their control surface's channel strip with a touch of a button.
Master Fader Press once to enable Master Fader control. Press a second time to enable V-Window mode for the 24th channel fader. Press a 3rd time to cycle back to basic channel control.
Mute While in V-Window mode, the Mute button on the last channel strip will cycle through the various V-Window Modes which are listed below:
VButton: Use this mode to interact with button controls. The mouse will stay in its place and activate a button press when the fader is touched.
VButtonSet: Use this mode to create and cycle through different button set points. With the mouse hovering above the on screen button's position press Shift+Solo on the control surface to set a Pin at that location. Using the fader in this mode will cylce between multiple Pins to use with VButton mode.
VWKnob: Use this mode when interacting with knob controls on the plug-ins GUI.
VWHSlider: Use this mode when interacting with horizontal slider controls on the plug-ins GUI.
VWVSlider: Use this mode when interacting with vertically slider controls on the plug-ins GUI.
Solo While in V-Window Mode, pressing the Solo button will pin the mouse location and revert to that location any time the fader is touched. Once the fader is released, the mouse is also returned to that pin position. This way it is very easy to pin a parameter and instantly control it without having to worry with the mouse cursor is on the screen.
Select Use the Select button while in V-Window mode to reset the fader position.
MIDI Mode
MIDI Mode converts the surfaces faders, knobs, and buttons into assignable MIDI Controls that can be mapped in the DAW.
Focus Toggles surface between DAW Mode and MIDI Mode

C24 - Studio One / Fender Studio

Channel Strips
Record Arms the assigned audio track of the Channel.
Solo Solos the Channel (with Momentary mode).
Mute Mutes the Channel (with Momentary mode).
Auto Cycles through Automation modes on track.
Select Sets the Channel to the Select state.
Knob Changes the assigned parameter.
Knob Button Sets assigned parameter to default value
Track Meters Displays metering for tracks. Currenlty supports one meter per channel.
Bank Mode
The assignment buttons are used to assign controls to the Knobs.
Pan (Default) Shows the track names in the LED strip and assigns Knobs to Channel Pan.
Send A,B,C,D,E Assigns Knob to Sends
First Press - Modify send level of the selected channel.
Additional Presses - Cycle through sends 1-8 to modify sends 1-8 for all tracks.
Input, Output Modify track parameters of the selected Channel.
Bypass all plug-ins.
Monitoring on/off.
Select Channel Input.
Select Channel Output.
Bypass Sends 1-4.
Master Bypass Bypass for Inserts 1-8 of the selected Channel.
Insert/Params Sets the V-Pots to Control Link mode.
Flip Flips knob assignment to faders.
Master Faders Toggles last Channel Fader to be Master Fader
Automation
Write Sets Automation to Write mode for the selected Channel.
Touch Sets Automation to Touch mode for the selected Channel.
Latch Sets Automation to Latch mode for the selected Channel.
Read Sets Automation to Read mode for the selected Channel.
Off Sets Automation to Off mode for the selected Channel.
Transport
Play Starts playhead at current position in Timeline.
Stop Stops playhead at current position in Timeline. (Press twice to Return to Zero)
Record Starts Record Mode for playhead
Rewind Move playhead backwards in Timeline.
Fast Forward Moves playhead forward in Timeline.
RTZ Return to zero.
Loop Play/Loop Rec Toggles Loop mode for loop selection in Timeline.
Quick Punch Toggles Punch mode for selection in Timeline.
Online Enables Marker Mode. Use Rewind to go to previous marker/Use Fast forward to go to next marker.
Counter Displays Counter for current session. Counter mode can be changed in DAW.
Automatic TalkBack This C24 feature is supported. Enable/disable on C24 by pressing Utility button.
Soft Keys
Press the Soft keys button to enter soft keys mode.
Mixer View Buttons (Filters tracks shown on Channels)
Knob Button 1 Shows all Studio One Channels.
Knob Button 2 Shows all available Inputs
Knob Button 3 Shows all Audio type tracks
Knob Button 4 Shows all Instrument type tracks
Knob Button 5 Shows all FX type tracks
Knob Button 6 Shows all Bus type tracks
Knob Button 7 Shows all available Outputs
Knob Button 8 Shows all Remote User tracks
Function keys (Keys are predefined but can be modified with Mackie Control Device editor)
Knob Button 9 Show Inputs
Knob Button 10 Show Track
Knob Button 11/Mix Window Button Show Mix Console
Knob Button 12 Open Channel
Knob Button 13 Add Insert
Knob Button 14 Add Send
Knob Button 15/Plug-In Window Button Show Inserts Window
Knob Button 16 Toggle Floating Window
Navigation
Bank Left Banks tracks left/Scrolls 1 track left in Nudge mode
Bank Right Banks tracks right/Scrolls 1 track right in Nudge mode
Nudge Toggles Nudge mode On/Off
The cursor buttons operate in several modes.
Zoom Horizontal and vertical zoom when zoom button is enabled.
Up Moves up track selection or list/Zooms out vertically
Down Moves down track selection or list/Zooms in vertically
Left Moves up track selection or list/Zooms out horizontally
Right Moves down track selection or list/Zooms in horizontally
Utility
Save Press the Save button to save.
Press Shift + Save button to open the Save As dialog.
Undo Press to undo the last edit.
Redo Press to redo edit.
Enter Confirm selection
Cancel Cancel selection
V-Window Mode
With the V-Window feature, users can instantly control any plug-ins or controls on screen through their control surface's channel strip with a touch of a button.
Master Fader Press once to enable Master Fader control. Press a second time to enable V-Window mode for the 24th channel fader. Press a 3rd time to cycle back to basic channel control.
Mute While in V-Window mode, the Mute button on the last channel strip will cycle through the various V-Window Modes which are listed below:
VButton: Use this mode to interact with button controls. The mouse will stay in its place and activate a button press when the fader is touched.
VButtonSet: Use this mode to create and cycle through different button set points. With the mouse hovering above the on screen button's position press Shift+Solo on the control surface to set a Pin at that location. Using the fader in this mode will cylce between multiple Pins to use with VButton mode.
VWKnob: Use this mode when interacting with knob controls on the plug-ins GUI.
VWHSlider: Use this mode when interacting with horizontal slider controls on the plug-ins GUI.
VWVSlider: Use this mode when interacting with vertically slider controls on the plug-ins GUI.
Solo While in V-Window Mode, pressing the Solo button will pin the mouse location and revert to that location any time the fader is touched. Once the fader is released, the mouse is also returned to that pin position. This way it is very easy to pin a parameter and instantly control it without having to worry with the mouse cursor is on the screen.
Select Use the Select button while in V-Window mode to reset the fader position.
MIDI Mode
MIDI Mode converts the surfaces faders, knobs, and buttons into assignable MIDI Controls that can be mapped in the DAW.
Focus Toggles surface between DAW Mode and MIDI Mode

C24 - Cubase/Nuendo

Channel Strips
EQ Assigns EQ editor for selected channel across channel knobs. Use Channel Bar Scroll buttons to access additional parameters.
Insert Assigns Plug-in Editor for selected channel across channel knobs. Use Channel Bar Scroll buttons to access plug-in parameters.
Send Assigns Sends for selected channel across channel knobs.
Record Arms the assigned audio track of the Channel.
Solo Solos the Channel.
Mute Mutes the Channel.
Auto Cycles through Read/Write Mode on track
Select Sets the Channel to the Select state.
Knob Changes the assigned parameter.
Knob Button
Track Meters Displays Stereo metering for tracks.
Bank Mode
The assignment buttons are used to assign controls to the Knobs.
Pan (Default) Shows pan position in LED Strip. Knob controls pan position.
Send A Assigns Send 1 to knobs. Assigns Send 6 to knobs when F-J is enabled. Use Channel Bar Scroll Left and Right to switch parameters.
Send B Assigns Send 2 to knobs. Assigns Send 7 to knobs when F-J is enabled. Use Channel Bar Scroll Left and Right to switch parameters.
Send C Assigns Send 3 to knobs. Assigns Send 8 to knobs when F-J is enabled. Use Channel Bar Scroll Left and Right to switch parameters.
Send D Assigns Send 4 to knobs. Use Channel Bar Scroll Left and Right to switch parameters.
Send E Assigns Send 5 to knobs. Use Channel Bar Scroll Left and Right to switch parameters.
F-J Toggles between Sends 1-5 and 6-8 for A-E buttons.
Send parameters 1st parameter is Send level.
2nd parameter is bypass for Send assignment.
3rd parameter is Pre/Post.
4th parameter is pan for send.
5th parameter is Send assignment.
6th parameter is Master send bypass for channel.
Input, Output Assign channel parameters to knobs. Use Channel bar scroll Left and Right to cycle through parameters.
Channel Parameters 1st parameter is channel output.
2nd parameter is input monitoring on channel.
3rd parameter is channel input.
4th parameter is pre-gain.
5th parameter is phase invert.
Soft Keys Assigns knob buttons on Channel strips to be soft key buttons.
Flip Flips knobs to faders.
Master Faders Enables Master Fader control on the 24th channel of C24.
Output Meters Displays the Master Meter.
Automation
Write Toggles Write automation for all channels.
Touch Sets Automation to Touch automation for all channels. When in Touch mode, pressing again enables Cross-over automation mode.
Latch Sets Automation to Latch mode for all channels. When in Latch mode, pressing again enables Cross-over automation mode.
Read Toggles Read automation for all channels.
Write To Start Enables Write to Start Automation.
Write To End Enables Write To End Automation.
Write To All Enables Loop Automation.
Auto Suspend Suspends Automation
There is no indication if Automation enables are On/Off
Vol Toggle Enable Volume Automation
Pan Toggle Enable Pan Automation
Mute Toggle Enable Mute Automation
Sends Toggle Enable Sends Automation
EQ Toggle Enable Send Mute Automation
Plugin Toggle Enable Plugin Automation
Transport
Play Starts playhead at current position in Timeline.
Stop Stops playhead at current position in Timeline.
Record Starts Record Mode for playhead
Rewind Move playhead backwards in Timeline.
Fast Forward Moves playhead forward in Timeline.
RTZ Returns playhead to beginning of Timeline.
Shift+RTZ Sends playhead to end of Timeline.
Pre Roll Enables Pre Roll
Post Roll Enables Post Roll
Mark In Sets start point of selection in Timeline.
Mark Out Sets end point of selection in Timeline.
Loop Play/Loop Rec Toggles Loop mode for loop selection in Timeline.
Quick Punch Toggles Punch mode for selection in Timeline.
Counter Displays Counter for current session. Counter mode can be changed in DAW.
Automatic TalkBack This C24 feature is supported. Enable/disable on C24 by pressing Utility button.
Edit
Copy Copy Selected Region
Copy+Option Cut Selected Region
Copy+Shift Delete Selected Region
Copy+Control Duplicate Selected Region
Copy+Command Separate Region at Playhead
Paste Paste Region
Utility
Save Save the current session.
Undo Undo the last action.
Redo Redo the last action.
Window Buttons
Mix Opens MixConsole Window
WinCfg Opens Status Window
Memloc Opens Memory Locator Window
Navigation
Bank Left Banks tracks left/Scrolls 1 track left in Nudge mode
Bank Right Banks tracks right/Scrolls 1 track right in Nudge mode
Nudge Toggles Nudge mode On/Off
There are several different modes available for the cursor keys and wheel.
Scrub Enables Scrub mode for the wheel.
Shuttle Enables Shuttle Mode for the wheel.
Navigate/Nav Enables Marker Mode. Use Wheel or Left/Right cursor keys to navigate between markers. Down cursor key creates marker at playhead.
Zoom Enables Zoom mode for the wheel and cursor keys.
Zoom+Shift Enables Track Zoom for the wheel and cursor keys. Track zoom increases/decreases track height.
Zoom+Option Enables Wave Zoom for the wheel and cursor keys. Wave zoom increases waveform view in region.
Trim Enables Nudge trim mode for the wheel and cursor keys. Use Left/Right cursor keys to change between start/end of region. Use Up/Down cursor keys or wheel to trim.
Soft Keys Button
Soft Keys Enables the knob buttons on the channel strips to become softkeys. Soft Keys can be mapped in the Studio Setups window of Cubase when the C24 is selected.
View Buttons
Focus Toggles Banking mode follow for Bank and Scroll buttons.
When Follow mode is on, Mixer in Cubase moves to match what is shown on Control surface. (Must have track count in Cubase view match control surface layout.)
V-Window Mode
With the V-Window feature, users can instantly control any plug-ins or controls on screen through their control surface's channel strip with a touch of a button.
Master Fader Press once to enable Master Fader control. Press a second time to enable V-Window mode for the 24th channel fader. Press a 3rd time to cycle back to basic channel control.
Mute While in V-Window mode, the Mute button on the last channel strip will cycle through the various V-Window Modes which are listed below:
VButton: Use this mode to interact with button controls. The mouse will stay in its place and activate a button press when the fader is touched.
VButtonSet: Use this mode to create and cycle through different button set points. With the mouse hovering above the on screen button's position press Shift+Solo on the control surface to set a Pin at that location. Using the fader in this mode will cylce between multiple Pins to use with VButton mode.
VWKnob: Use this mode when interacting with knob controls on the plug-ins GUI.
VWHSlider: Use this mode when interacting with horizontal slider controls on the plug-ins GUI.
VWVSlider: Use this mode when interacting with vertically slider controls on the plug-ins GUI.
Solo While in V-Window Mode, pressing the Solo button will pin the mouse location and revert to that location any time the fader is touched. Once the fader is released, the mouse is also returned to that pin position. This way it is very easy to pin a parameter and instantly control it without having to worry with the mouse cursor is on the screen.
Select Use the Select button while in V-Window mode to reset the fader position.
MIDI Mode
MIDI Mode converts the surfaces faders, knobs, and buttons into assignable MIDI Controls that can be mapped in the DAW.
Focus Toggles surface between DAW Mode and MIDI Mode

C24 - MixBus

Channel Strips
Record Arms the assigned audio track of the Channel.
Solo Solos the Channel
Mute Mutes the Channel
Select Sets the Channel to the Select state.
EQ Assigns EQ editor to knobs for the selected track.
DYN Assigns DYN editor to knobs for the selected track.
Sends Assigns Send editor to knobs for the selected track.
Auto Cycle through Automation modes on the selected channel.
Knob Changes the assigned parameter.
Knob Button Sets assigned parameter to default value
When in Plug-In Mode, selects plug-in to edit.
Track Meters Displays metering for tracks. Currenlty supports one meter per channel.
Bank Mode
The assignment buttons are used to assign controls to the Knobs.
Pan (Default) Shows the track names in the LED strip and assigns Knobs to Channel Pan.
Send A,B,C,D,E Assigns Knobs to Sends for selected track.
Use the knob button to toggle the send off/on
Input, Output Assigns track parameters to the knobs for the selected track.
Trim gain, Monitor Mode, Solo Isolate, Solo Safe, and Phase are available to edit in this mode.
Flip Flips knob assignment to faders.
Master Faders Toggles last Channel Fader to be Master Fader
Transport
Play Starts playhead at current position in Timeline.
Stop Stops playhead at current position in Timeline. (Press twice to Return to Zero)
Record Starts Record Mode for playhead
Rewind Move playhead backwards in Timeline.
Fast Forward Moves playhead forward in Timeline.
RTZ Go to Start of Session.
Trans= Go to End of Session.
Loop Play Start Looped Playback.
Loop Rec Punch In
Punch Punch Out
In Mark In
Out Mark Out
Audition Sets Loop from selection
Pre Roll Sets Punch from selection
Post Roll Sets Session Start/End from selection
Dyn Trans Toggles Click
Counter Mode Select Toggles Counter Display
Counter Displays Counter for current session. Counter mode can be changed in DAW.
Automation
The automation buttons control automation for the selected track
Read Enables Play Automation for the selected track.
Write Enables Write Automation for the selected track.
Touch Enables Touch Automation for the selected track.
Off Enables Off/Manual Automation for the selected track.
Zoom Preset Buttons
The Zoom preset buttons change which tracks are in view on the channel strips.
Zoom Preset 1 Shows only MIDI tracks. Press again to return to default Mixer view.
Zoom Preset 2 Shows only Audio tracks. Press again to return to default Mixer view.
Zoom Preset 3 Shows only Busses. Press again to return to default Mixer view.
Zoom Preset 4 Shows only Aux tracks. Press again to return to default Mixer view.
Zoom Preset 5 Shows user selected tracks. Press again to return to default Mixer view.
Navigation
Bank Left Banks tracks left/Scrolls 1 track left in Nudge mode
Bank Right Banks tracks right/Scrolls 1 track right in Nudge mode
Nudge Toggles Nudge mode On/Off
The cursor buttons operate in several modes.
Navigate Enables Marker Mode for the cursor arrows.
Zoom Enables zoom mode for the cursor keys.
Up Zooms in Vertically when zoom mode is active.
Deletes marker at playhead when marker mode is active.
Down Zooms out Vertically when zoom mode is active.
Creates Marker at playhead when marker mode is active.
Left Zooms out Horizontally when zoom mode is active.
Moves to Previous marker when marker mode is active.
Right Zooms in Horizontally when zoom mode is active.
Moves to Next Marker when marker mode is active.
Utility
Undo Press to undo the last edit.
Redo Press to redo edit.
Save Saves Session
Enter Acts as Enter key.
Escape Acts as ESC key.
Do To All Select All Tracks.
Do To Selected Deselect All Tracks.
Soft Keys
Use the Function Keys editor in the MixBus Mackie Control Protocol Settings Window to assign commands
Soft Keys Switch the knob buttons to act as soft keys.
Knob button 9 F1
Knob button 10 F2
Knob button 11 F3
Knob button 12 F4
Knob button 13 F5
Knob button 14 F6
Knob button 15 F7
Knob button 16 F8
V-Window Mode
With the V-Window feature, users can instantly control any plug-ins or controls on screen through their control surface's channel strip with a touch of a button.
Master Fader Press once to enable Master Fader control. Press a second time to enable V-Window mode for the 24th channel fader. Press a 3rd time to cycle back to basic channel control.
Mute While in V-Window mode, the Mute button on the last channel strip will cycle through the various V-Window Modes which are listed below:
VButton: Use this mode to interact with button controls. The mouse will stay in its place and activate a button press when the fader is touched.
VButtonSet: Use this mode to create and cycle through different button set points. With the mouse hovering above the on screen button's position press Shift+Solo on the control surface to set a Pin at that location. Using the fader in this mode will cylce between multiple Pins to use with VButton mode.
VWKnob: Use this mode when interacting with knob controls on the plug-ins GUI.
VWHSlider: Use this mode when interacting with horizontal slider controls on the plug-ins GUI.
VWVSlider: Use this mode when interacting with vertically slider controls on the plug-ins GUI.
Solo While in V-Window Mode, pressing the Solo button will pin the mouse location and revert to that location any time the fader is touched. Once the fader is released, the mouse is also returned to that pin position. This way it is very easy to pin a parameter and instantly control it without having to worry with the mouse cursor is on the screen.
Select Use the Select button while in V-Window mode to reset the fader position.
MIDI Mode
MIDI Mode converts the surfaces faders, knobs, and buttons into assignable MIDI Controls that can be mapped in the DAW.
Focus Toggles surface between DAW Mode and MIDI Mode

C24 - Performer

Channel Strips
Record Arms the assigned audio track of the Channel.
Solo Solos the Channel.
Mute Mutes the Channel.
Select Sets the Channel to the Select state.
Knob Changes the assigned parameter.
Knob Button Sets assigned parameter to default value
In Insert Mode the Knob button will toggle bypass on the plug-in.
Track Meters Displays metering for tracks. Currenlty supports one meter per channel.
Bank Mode
The assignment buttons are used to assign controls to the Knobs.
Pan (Default) Shows the track names in the LED strip and assigns Knobs to Channel Pan.
Send A,B,C,D,E Assigns Knob to Sends
When Bank assignment is set to Sends. Up/Down cursor keys cycle through send slots.
Input, Output Opens bank assignment options. Use the knob buttons to select assignment for knobs.
Params Assigns Insert mode for the knobs. Use the knobs to select plug-in to insert on channel.
When Bank assignment is set to inserts. Up/Down cursor keys cycle through insert slots.
Assign While in Insert Mode, hold down the In/Edit button and press the knob button on the
Safe Hold down and use the knob to cycle through presets for the selected plug-in.
Flip Flips knob assignment to faders.
Master Faders Toggles last Channel Fader to be Master Fader
Automation
To Assign automation to a channel. Hold down the automation button and press the Channel button you wish to assign automation to.
Must be in Pan or Send Assignment mode for Automation Assignment to Work.
Write Sets Automation to Write mode for the selected Channel.
Touch Sets Automation to Touch mode for the selected Channel.
Latch Sets Automation to Latch mode for the selected Channel.
Read Sets Automation to Read mode for the selected Channel.
Trim Sets Automation to Trim Touch mode for selected Channel.
Transport
Play Starts playhead at current position in Timeline.
Stop Stops playhead at current position in Timeline. (Press twice to Return to Zero)
Record Starts Record Mode for playhead
Rewind Move playhead backwards in Timeline.
Fast Forward Moves playhead forward in Timeline.
Audition Toggles Audible Mode
Online Toggles Metronome
In Set Left
Out Set Right
Quick Punch Set Left Drop
Counter Displays Counter for current session. Counter mode can be changed in DAW.
Navigation
Bank Left Banks tracks left/Scrolls 1 track left in Nudge mode
Bank Right Banks tracks right/Scrolls 1 track right in Nudge mode
Nudge Toggles Nudge mode On/Off
The cursor buttons operate in several modes.
Zoom Horizontal and vertical zoom when zoom button is enabled.
Up Moves up track selection or list/Zooms out vertically
When Bank assignment is set to inserts. Up cursor key cycle through insert slots.
When Bank assignment is set to sends. Up cursor key cycle through send slots.
Down Moves down track selection or list/Zooms in vertically
When Bank assignment is set to inserts. Down cursor key cycle through insert slots.
When Bank assignment is set to sends. Down cursor key cycle through insert slots.
Left Moves up track selection or list/Zooms out horizontally
Right Moves down track selection or list/Zooms in horizontally
Utility
Save Press the Save button to save.
Press Shift + Save button to open the Save As dialog.
Undo Press to undo the last edit.
Enter Confirm selection
Cancel Cancel selection
V-Window Mode
With the V-Window feature, users can instantly control any plug-ins or controls on screen through their control surface's channel strip with a touch of a button.
Master Fader Press once to enable Master Fader control. Press a second time to enable V-Window mode for the 24th channel fader. Press a 3rd time to cycle back to basic channel control.
Mute While in V-Window mode, the Mute button on the last channel strip will cycle through the various V-Window Modes which are listed below:
VButton: Use this mode to interact with button controls. The mouse will stay in its place and activate a button press when the fader is touched.
VButtonSet: Use this mode to create and cycle through different button set points. With the mouse hovering above the on screen button's position press Shift+Solo on the control surface to set a Pin at that location. Using the fader in this mode will cylce between multiple Pins to use with VButton mode.
VWKnob: Use this mode when interacting with knob controls on the plug-ins GUI.
VWHSlider: Use this mode when interacting with horizontal slider controls on the plug-ins GUI.
VWVSlider: Use this mode when interacting with vertically slider controls on the plug-ins GUI.
Solo While in V-Window Mode, pressing the Solo button will pin the mouse location and revert to that location any time the fader is touched. Once the fader is released, the mouse is also returned to that pin position. This way it is very easy to pin a parameter and instantly control it without having to worry with the mouse cursor is on the screen.
Select Use the Select button while in V-Window mode to reset the fader position.
MIDI Mode
MIDI Mode converts the surfaces faders, knobs, and buttons into assignable MIDI Controls that can be mapped in the DAW.
Focus Toggles surface between DAW Mode and MIDI Mode

C24 - Ableton Live

Channel Strips
Record Arms the assigned audio track of the Channel.
Solo Solos the Channel
Mute Mutes the Channel
Select Sets the Channel to the Select state.
Knob Changes the assigned parameter.
Knob Button Sets assigned parameter to default value
When in Plug-In Mode, selects plug-in to edit.
Track Meters Displays metering for tracks. Currenlty supports one meter per channel.
Bank Mode
The assignment buttons are used to assign controls to the Knobs.
Pan (Default) Shows the track names in the LED strip and assigns Knobs to Channel Pan.
Send A,B,C,D,E Assigns Knob to Sends
Modify send levels of the selected channel.
Input, Output Modify IO parameters of channels
Press multiple times to cycle through input and output parameters
Insert/Params Sets the V-Pots to PlugIn Edit mode.
Flip Flips knob assignment to faders.
Master Faders Toggles last Channel Fader to be Master Fader
Transport
Play Starts playhead at current position in Timeline.
Stop Stops playhead at current position in Timeline. (Press twice to Return to Zero)
Record Starts Record Mode for playhead
Rewind Move playhead backwards in Timeline.
Fast Forward Moves playhead forward in Timeline.
Loop Play/Loop Rec Toggles Loop mode for loop selection in Timeline.
In Toggles Punch In for Arrangement
Out Toggles Punch Out for Arrangement
Counter Mode Select Toggles Counter Display
Counter Displays Counter for current session. Counter mode can be changed in DAW.
Automatic TalkBack This C24 feature is supported. Enable/disable on C24 by pressing Utility button.
Trigger Buttons
Quick Punch Triggers selected Clip to play.
Zoom Preset 5 Triggers selected Scene to play.
PrePost Triggers selected Scene to play.
Scrub Triggers selected Scene to play.
Send Mute Stops all clips.
Loop Record Triggers Back to Arrangement when in clip play.
Navigation
Bank Left Banks tracks left/Scrolls 1 track left in Nudge mode
Bank Right Banks tracks right/Scrolls 1 track right in Nudge mode
Nudge Toggles Nudge mode On/Off
The cursor buttons operate in several modes.
Zoom Switches cursor keys to Zoom mode.
Navigate Switches cursor keys to Marker mode.
Up Moves Up Selection in Session/Arrangment View.
Down Moves Down Selection in Session/Arrangement View.
Creates Marker in Arrangement at Playhead.
Left Moves Left Selection in Session View.
Zooms Out in Arrangement View
Moves to Previous Marker in Arrangement.
Right Moves Right Selection in Session View.
Zooms In in Arrangement View
Moves to Next Marker in Arrangement.
Wheel
There are two modes to use with the wheel
Scrub Changes the Wheel to Scene mode. Wheel moves up and down the scenes in Session view.
Shuttle Changes the Wheel to Navigation mode. Wheel moves playhead forward and back through timeline.
Utility
Undo Press to undo the last edit.
Redo (C24) Press to redo edit.
Shift+Undo (Control 24/ProControl) Press to redo edit.
Pencil Tool Toggles Draw
Grab Tool Toggles Follow
Soft Keys
Press the Soft keys button to enter soft keys mode.
Use the Ableton Live MIDI mapping mode to map keys to functions.
Knob Button 1 Maps F#2 key
Knob Button 2 Maps G2 key
Knob Button 3 Maps G#2 key
Knob Button 4 Maps A2 key
Knob Button 5 Maps A#2 key
Knob Button 6 Maps B2 key
Knob Button 7 Maps C3 key
Knob Button 8 Maps C#3 key
Knob Button 9 Maps D3 key
Knob Button 10 Maps D#3 key
Knob Button 11 Maps E3 key
Knob Button 12 Maps F3 key
Knob Button 13 Maps F#3 key
Knob Button 14 Maps G3 key
Knob Button 15 Maps G#3 key
Knob Button 16 Maps A3 key
V-Window Mode
With the V-Window feature, users can instantly control any plug-ins or controls on screen through their control surface's channel strip with a touch of a button.
Master Fader Press once to enable Master Fader control. Press a second time to enable V-Window mode for the 24th channel fader. Press a 3rd time to cycle back to basic channel control.
Mute While in V-Window mode, the Mute button on the last channel strip will cycle through the various V-Window Modes which are listed below:
VButton: Use this mode to interact with button controls. The mouse will stay in its place and activate a button press when the fader is touched.
VButtonSet: Use this mode to create and cycle through different button set points. With the mouse hovering above the on screen button's position press Shift+Solo on the control surface to set a Pin at that location. Using the fader in this mode will cylce between multiple Pins to use with VButton mode.
VWKnob: Use this mode when interacting with knob controls on the plug-ins GUI.
VWHSlider: Use this mode when interacting with horizontal slider controls on the plug-ins GUI.
VWVSlider: Use this mode when interacting with vertically slider controls on the plug-ins GUI.
Solo While in V-Window Mode, pressing the Solo button will pin the mouse location and revert to that location any time the fader is touched. Once the fader is released, the mouse is also returned to that pin position. This way it is very easy to pin a parameter and instantly control it without having to worry with the mouse cursor is on the screen.
Select Use the Select button while in V-Window mode to reset the fader position.
MIDI Mode
MIDI Mode converts the surfaces faders, knobs, and buttons into assignable MIDI Controls that can be mapped in the DAW.
Focus Toggles surface between DAW Mode and MIDI Mode

C24 - LUNA

Channel Strips
Record Arms the assigned audio track of the Channel.
Solo Solos the Channel.
Mute Mutes the Channel.
Select Sets the Channel to the Select state.
Knob Changes the assigned parameter.
Knob Button Sets assigned parameter to default value
Solo Clear When lit, pressing clears all active solos.
Track Meters Displays metering for tracks. Currenlty supports one meter per channel.
Bank Mode
There are two ways to use the Send Mode button to assign Sends to the knobs.
Send A (Hold)+Knob Button Single Sends V-Pot mode. Press and hold the Send A button and then press the specified knob button to display that Send across all V-pots.
Send A Expanded Sends V-Pot mode. Press Send A to cycle through Send overview and detail pages, which allow control over the selected track's parameters.
Flip Flips V-Pot control to Faders.
Send Mute Spills the Main Bus
Master Faders Press first time to toggle Master fader to be assigned to last fader on controller. Master Fader light will be solid in this mode.
Press second time to enable V-Window feature for last fader on controller. Master Fader Light will be flashing in this mode.
Automation
Touch Sets Automation to Touch mode for the selected Channel.
Read Sets Automation to Read mode for the selected Channel.
Trim Toggles Trim Mode for the selected Channel.
Transport
Play Starts playhead at current position in Timeline.
Stop Stops playhead at current position in Timeline. (Press twice to Return to Zero)
Record Starts Record Mode for playhead
Rewind Move playhead backwards in Timeline.
Fast Forward Moves playhead forward in Timeline.
RTZ Move playhead to the start of the timeline
GTE Move playhead to the end of the timeline
Counter Displays Counter for current session. Counter mode can be changed in DAW.
Navigation
Bank Left Banks tracks left/Scrolls 1 track left in Nudge mode
Bank Right Banks tracks right/Scrolls 1 track right in Nudge mode
Nudge Toggles Nudge mode On/Off
The cursor buttons operate in several modes.
Navigate Opens the Marker browser.
Zoom Horizontal and vertical zoom when zoom button is enabled.
Up Moves up track selection or list/Zooms out vertically
Down Moves down track selection or list/Zooms in vertically
Left Moves to previous marker/Zoom out on timeline
Right Moves to next marker/Zoom in on timeline
Utility
Save Press the Save button to save.
Press Shift + Save button to open the Save As dialog.
Undo Press to undo the last edit.
Enter Confirm selection
Cancel Cancel selection
Window Buttons
Mix Toggles between mix and edit windows.
V-Window Mode
With the V-Window feature, users can instantly control any plug-ins or controls on screen through their control surface's channel strip with a touch of a button.
Master Fader Press once to enable Master Fader control. Press a second time to enable V-Window mode for the 24th channel fader. Press a 3rd time to cycle back to basic channel control.
Mute While in V-Window mode, the Mute button on the last channel strip will cycle through the various V-Window Modes which are listed below:
VButton: Use this mode to interact with button controls. The mouse will stay in its place and activate a button press when the fader is touched.
VButtonSet: Use this mode to create and cycle through different button set points. With the mouse hovering above the on screen button's position press Shift+Solo on the control surface to set a Pin at that location. Using the fader in this mode will cylce between multiple Pins to use with VButton mode.
VWKnob: Use this mode when interacting with knob controls on the plug-ins GUI.
VWHSlider: Use this mode when interacting with horizontal slider controls on the plug-ins GUI.
VWVSlider: Use this mode when interacting with vertically slider controls on the plug-ins GUI.
Solo While in V-Window Mode, pressing the Solo button will pin the mouse location and revert to that location any time the fader is touched. Once the fader is released, the mouse is also returned to that pin position. This way it is very easy to pin a parameter and instantly control it without having to worry with the mouse cursor is on the screen.
Select Use the Select button while in V-Window mode to reset the fader position.
MIDI Mode
MIDI Mode converts the surfaces faders, knobs, and buttons into assignable MIDI Controls that can be mapped in the DAW.
Focus Toggles surface between DAW Mode and MIDI Mode

Control24 - Pro Tools

Important HUI Metering Information

The HUI protocol provides for stereo track metering. It does not provide for output metering. Pro Tools will not provide track metering if Eucon is enabled. Disable Eucon for track metering.

Important Insert Editing Information

Pro Tools limits HUI device plug-in editing to the first eight channels of the surface. You can bank and scroll a track to the first eight channels and select a plug-in to edit. Thereafter, you can bank and scroll while editing the plug-in.

Channel Strip
Record Arms the assigned audio track of the Channel (LED flashes when record-ready, lit when recording).
Option+ Record-enables all tracks (when pressed on non-enabled track).
Option+ Disables all tracks for recording (when pressed on enabled track).
Option+Shift+ Record-enables selected tracks only.
Alt+ Enables or clears Record Safe mode on channel (LED flashes briefly).
Option+Alt+ Enables or clears Record Safe on all channels.
Shift+Option+Alt+ Enables or clears Record Safe on selected channels only.
Insert Enables insert editor for selected Channel.
Double-click Directly accesses first assigned insert for editing.
Multiple double-clicks Cycles through inserts on channel.
Bypass+ Bypasses or enables all plug-ins on all inserts for channel (when Bypass mode enabled).
Bypass+Option+ Bypasses plug-ins on all channels (when Bypass mode enabled).
Solo Solos the Channel (LED lights when enabled).
Option+ Enables or clears solos on all channels.
Option+Shift+ Enables or clears solos on all selected channels.
Alt+ Enables or clears Solo Safe mode on channel (LED flashes briefly).
Option+Alt+ Enables or clears Solo Safe on all channels.
Shift+Option+Alt+ Enables or clears Solo Safe on selected channels only.
Mute Mutes the Channel (LED lights when enabled).
Option+ Enables or clears mutes on all channels.
Option+Shift+ Enables or clears mutes on all selected channels.
Auto Press to see auto mode.
+AUTOMATION MODES Hold down and select automation mode (WRITE, TOUCH, LATCH, TRIM, READ, OFF).
+Select Hold down and press channel select button to cycle through automation modes.
Option+Automation mode Changes automation mode on all channels.
Option+Shift+Automation mode Changes automation mode on all selected channels.
Select Selects track (LED lights when selected).
Shift+ Deselects single channel OR selects/deselects multiple channels.
Option+ Selects or deselects all channels.
Alt+ Changes SELECT state of channel and changes all others to opposite state (on lit switch).
Default+ Reset fader to 0 db.
Default+Option+ Reset all faders to 0 db.
Default+Option+Shift+ Reset all selected faders to 0 db.
Knob Adjust control assigned for bank mode.
Pan Mode - Adjust stereo pan for mono and stereo tracks.
Send A-E Modes - Adjust send volume.
Flip Send A-E Modes - Adjust send pan for mono/stereo sends.
Insert Edit Mode - Adjust plugin parameter for strips 1-8.
Cmd+ Fine mode (fine adjustments).
Alt+ Fine adjustments for Knob controls.
Knob Button Default+ Pan Mode - Reset pan to default
Send Mute Mode - Control send mute
Pre/Post Mode - Control send pre/post.
Insert Select Mode - Select insert A-D, E for strips 1-4.
Insert Edit Mode - Adjust discrete parameter for strips 1-4.
Option+ Toggles send pre/post for all channels (in Send mode).
Option+Shift+ Toggles send pre/post for all selected channels (in Send mode).
Default+ Returns channel's send level or pan to default.
Default+Option+ Returns all channel send levels/pans to default.
Default+Option+Shift+ Returns all selected channel send levels/pans to default.
Fader Track volume control.
Ctrl+ Clutch mode - disengages faders from Mix groups while held.
Master Record Toggles all enabled REC/RDY switches on and off.
Meters Displays stereo metering for tracks.

Buttons are used to set a bank mode which assign controls to the Knobs.

PAN
PAN Enables pan control on Knobs.
Press twice On stereo channels, edits right channel pan.
LCR,FrontRear,Rear,Divergence,Center,LFE,LR Stereo Pan Mode for mono / stereo tracks
Toggle between Pan L and Pan R for stereo tracks
Toggle between Pan L and Pan R for stereo sends when in send mode
SENDS
A Send A Mode - enables send level control on Knobs for Send A.
Assign+ Enters assign mode for send routing.
Insert+ Quick access to send level editing.
B Send B Mode - enables send level control on Knobs for Send B.
C Send C Mode - enables send level control on Knobs for Send C.
D Send D Mode - enables send level control on Knobs for Send D.
E Send E Mode - enables send level control on Knobs for Send E.
Flip
Flip Enters Flip mode (LED flashes).
Send levels mapped to faders.
Send pan controls mapped to Knobs.
Send mutes mapped to MUTE switches.
V-SEL controls send pre/post operation.
SWITCH FUNCTIONS
Pre/Post Sets knob buttons to Pre/Post mode when in Sends Mode.
Send Mute Sets knob buttons to Send Mute mode when in Sends Mode.
ASSIGN
Input Enters assign mode for input routing.
Assign+ Enters assign mode for input routing.
Output Enters assign mode for output routing.
Assign+ Enters assign mode for output routing.
Ctrl+Assign Confirms additional output assignment (during output assign).
INSERT BYPASS
Insert Bypass Enables Master Bypass mode (INSERT switches become bypass switches).
+Insert Toggles bypass for all plug-ins on channel (when Bypass mode enabled).
+Option+Insert Changes bypass status of all plug-ins on all channels (when Bypass mode enabled).
+Option+Shift+Insert Changes bypass status on all selected channels (when Bypass mode enabled).
AUTOMATION MODES
Hold down channel strip Auto button to select automation modes.
Read Sets selected Channel to Read Mode (AUTO LED green).
Option+ Arms all channels for Read mode.
Option+Shift+ Arms all selected channels for Read mode.
Write Sets selected Channel to Write Mode (AUTO LED red flashing/lit).
Option+ Arms all channels for Write mode.
Option+Shift+ Arms all selected channels for Write mode.
Touch Sets selected Channel to Touch Mode (AUTO LED red flashing/lit).
Option+ Arms all channels for Touch mode.
Option+Shift+ Arms all selected channels for Touch mode.
Latch Sets selected Channel to Latch Mode (AUTO LED red flashing/lit).
Option+ Arms all channels for Latch mode.
Option+Shift+ Arms all selected channels for Latch mode.
Trim Toggles TRIM mode on/off for track (TDM only).
Alt+ Displays trim delta value instead of absolute value (while adjusting).
Option+ Arms all channels for Trim mode.
Option+Shift+ Arms all selected channels for Trim mode.
Off Disables automation on channel (AUTO LED off).
Option+ Disables automation on all channels.
Option+Shift+ Disables automation on all selected channels.
AUTO ENABLES
Volume Enables automation for fader.
Option+ Toggles all automation parameters to this state.
Alt+ Changes FADER state and sets other five to opposite.
Pan Enables automation for pan (enables both channel and send pan if both disabled).
Option+ Toggles all automation parameters to this state.
Alt+ Changes PAN state and sets other five to opposite.
Mute Enables automation for mute.
Option+ Toggles all automation parameters to this state.
Alt+ Changes MUTE state and sets other five to opposite.
Send LvL Enables automation for send.
Option+ Toggles all automation parameters to this state.
Alt+ Changes SEND state and sets other five to opposite.
Plug-In Enables automation for plug-ins.
Option+ Toggles all automation parameters to this state.
Alt+ Changes PLUG IN state and sets other five to opposite.
Send Mute Enables automation for send mute.
Option+ Toggles all automation parameters to this state.
Alt+ Changes SEND MUTE state and sets other five to opposite.
AUTO WRITE TO
Start Write to Start (writes automation from insertion point backward to beginning).
Same as Ctrl + RTZ.
Ctrl+Option+ Suppresses warning dialog for Write to Start.
End Write to End (writes automation from insertion point forward to end).
Same as Ctrl + END.
Ctrl+Option+ Suppresses warning dialog for Write to End.
All Write to All (writes automation to entire selection/track).
Same as Ctrl+Shift + RTZ or END.
Transport
Play Begins playback from current cursor position.
Shift+ Initiates half-speed playback.
Stop Stops playback or recording.
Shift+ Aborts the current record pass.
Record Arms Pro Tools for recording (LED flashes).
Ctrl+ Cycles through record modes (normal, QuickPunch, Loop).
Rewind Rewinds the session from current cursor position (incremental or continuous depending on preferences).
Shift+ Return-to-Zero (same as RTZ button).
Fast Forward Fast-forwards the session from current cursor position (incremental or continuous).
Shift+ Go-To-End (same as END button).
RTZ Sets playback cursor to the beginning of the session.
Ctrl+ Write to Start (writes automation from insertion point backward to beginning).
Ctrl+Shift+ Write to All (writes automation to entire selection/track).
Ctrl+Option+ Suppresses warning dialog for Write to Start.
GTE Sets playback cursor to the end of the session.
Ctrl+ Write to End (writes automation from insertion point forward to end).
Ctrl+Shift+ Write to All (writes automation to entire selection/track).
Ctrl+Option+ Suppresses warning dialog for Write to End.
Pre Roll Activates pre-roll.
Alt+ Enters pre-roll time value (numeric entry mode).
Post Roll Activates post-roll.
Alt+ Enters post-roll time value (numeric entry mode).
Mark In Marks In edit point during playback / Sets start point of selection in Timeline.
Alt+ Manually enters selection start time.
Option+Left Arrow Centers left side of waveform selection in Edit Window.
Mark Out Marks Out edit point during playback / Sets end point of selection in Timeline.
Alt+ Manually enters selection end time.
Option+Right Arrow Centers right side of waveform selection in Edit Window.
Loop Play Toggles Loop Playback mode (LED lit when enabled).
Ctrl+ Places Pro Tools into Loop Record mode.
Loop Record Enables Loop Record.
Quick Punch Toggles QuickPunch recording mode (LED lit when enabled).
Audition Press with PRE/POST/IN/OUT to play audio; playback continues until pressed again.
Alt+Option+PRE Plays audio from pre-roll point through selection start plus post-roll.
Alt+Option+IN Plays audio from pre-roll point through selection start plus post-roll.
Alt+Option+OUT Plays audio from before selection end (pre-roll) through selection end plus post-roll.
Alt+Option+POST Plays audio from before selection end (pre-roll) through selection end plus post-roll.
Online Places Pro Tools online or offline (LED lit when online).
Ctrl+ Cycles through available machine master choices (Pro Tools, Serial Machine, ADAT).
Scrub Enables Scrub mode (rotate wheel to scrub forward/backward).
Option+ Begins scrubbing from selection end point.
Alt+ Fixed "fine scrub" resolution regardless of zoom level (while scrubbing).
Shift+ Creates selection using scrub wheel (starts at current position).
Shift+Option+ Modifies end of existing selection.
Left/Right Arrow Moves to selection start/end (during scrub).
Shuttle Enables Shuttle mode (rotate wheel to shuttle forward/backward).
Option+ Begins shuttling from selection end point.
Shift+ Creates selection using shuttle wheel.
Shift+Option+ Modifies end of existing selection.
Left/Right Arrow Moves to selection start/end (during shuttle).
Counter Displays Counter for current session. Counter mode can be changed in DAW.
Channel Strip
Insert Normal Mode - Assign track to insert editor
Insert Bypass Mode - Bypass all inserts on track
INSERTS
Params Toggles between Insert Display mode (LED off) and Parameter mode (LED lit).
Master Bypass Bypass selected plug-in on track.
In Parameter mode: Engages Master Bypass for selected plug-in (LED lights).
Compare Compares current plug-in setting with previous (must have plug-in visible on-screen).
Default+ Returns plug-in to factory/user default setting.
CHANNEL BAR SCROLL
Left In Insert mode: Toggles display between Inserts #1-4 and Insert #5.
In Parameter mode: Cycles through plug-in control parameter pages (previous page).
Right In Insert mode: Toggles display between Inserts #1-4 and Insert #5.
In Parameter mode: Cycles through plug-in control parameter pages (next page).
Group Buttons
Create Creates group from selected channels (use Shift+Select on multiple channels first).
Suspend Suspends all Mix groups temporarily (LED flashes when enabled).
Status Shows Group ID status.
Utility
Save Press once to arm save, press again to complete save (LED flashes when armed).
Shift+ Opens Save As dialog.
F8/ESC Aborts the save process.
Undo Undo or Redo last edit operation (LED lit when Undo available, flashes when Redo available).
Cancel Cancel selection / Serves as Escape to cancel any assignment mode or on-screen modal dialog.
Solo Clear Clears all Solos on Channel Strip.
Navigation
Bank Left Swaps channels left eight at a time.
Option+ Banks to far-left position in session.
Bank Right Swaps channels right eight at a time.
Option+ Banks to far-right position in session.
Channel Left Scrolls channels left one at a time.
Option+ Scrolls to far-left position.
Channel Right Scrolls channels right one at a time.
Option+ Scrolls to far-right position.
Nudge Toggles Nudge mode On/Off (Bank Left/Right scroll 1 track when enabled).
Zoom Cycles through three modes: Navigation (LED off), Zoom (LED lit), Selection (LED flashing).
Navigation Mode (LED off):
Up Moves edit cursor or selection to previous track (marks in/out).
Shift+ Extends edit selection to previous track.
Alt+ Scrolls frontmost window upward.
Alt+Option+ Scrolls to top of session (Edit window).
Down Moves edit cursor or selection to next track (marks in/out).
Shift+ Extends edit selection to next track.
Alt+ Scrolls frontmost window downward.
Alt+Option+ Scrolls to bottom of session (Edit window).
Left Moves edit cursor to previous region boundary or sync point.
Shift+ Extends selection to preceding region boundary.
Option+ Centers left side of waveform selection in Edit Window.
Alt+ Scrolls frontmost window to the left (one page).
Alt+Option+ Scrolls to beginning of session (Edit window).
Ctrl+ Selects previous region.
Ctrl+Shift+ Extends selection to include previous region.
Right Moves edit cursor to next region boundary or sync point.
Shift+ Extends selection to forward region boundary.
Option+ Centers right side of waveform selection in Edit Window.
Alt+ Scrolls frontmost window to the right (one page).
Alt+Option+ Scrolls to end of session (Edit window).
Ctrl+ Selects next region.
Ctrl+Shift+ Extends selection to include next region.
Zoom Mode (LED lit):
Left Decreases horizontal zoom.
Right Increases horizontal zoom.
Up Increases vertical zoom.
Down Decreases vertical zoom.
Selection Mode (LED flashing):
Left Adjusts selection in-point with Scrub/Shuttle wheel.
Double-click Positions cursor at selection's left edge.
+Right+Wheel Adjusts selection time position while retaining duration.
Right Adjusts selection out-point with Scrub/Shuttle wheel.
Double-click Positions cursor at selection's right edge.
+Left+Wheel Adjusts selection time position while retaining duration.
Up Moves selection to previous track.
Shift+ Extends selection to previous track.
Option+ Removes selection from topmost track.
Down Moves selection to next track.
Shift+ Extends selection to next track.
Option+ Removes selection from bottommost track.
Window Buttons
Mix Brings Mix window to foreground (LED lights when active).
Edit Brings Edit window to foreground (LED lights when active).
MemLoc Opens or closes the Memory Locations window.
Transport Opens or closes the Transport window.
Plug-In Opens or closes the floating window for currently selected plug-in.
Status Opens or closes the Session Setup window.
V-Window Mode
With the V-Window feature, users can instantly control any plug-ins or controls on screen through their control surface's channel strip with a touch of a button.
Master Fader Press once to enable V-Window mode for the 24th channel fader. Press a 2nd time to cycle back to basic channel control.
Mute While in V-Window mode, the Mute button on the last channel strip will cycle through the various V-Window Modes which are listed below:
VButton: Use this mode to interact with button controls. The mouse will stay in its place and activate a button press when the fader is touched.
VButtonSet: Use this mode to create and cycle through different button set points. With the mouse hovering above the on screen button's position press Shift+Solo on the control surface to set a Pin at that location. Using the fader in this mode will cylce between multiple Pins to use with VButton mode.
VWKnob: Use this mode when interacting with knob controls on the plug-ins GUI.
VWHSlider: Use this mode when interacting with horizontal slider controls on the plug-ins GUI.
VWVSlider: Use this mode when interacting with vertically slider controls on the plug-ins GUI.
Solo While in V-Window Mode, pressing the Solo button will pin the mouse location and revert to that location any time the fader is touched. Once the fader is released, the mouse is also returned to that pin position. This way it is very easy to pin a parameter and instantly control it without having to worry with the mouse cursor is on the screen.
Select Use the Select button while in V-Window mode to reset the fader position.
MIDI Mode
MIDI Mode converts the surfaces faders, knobs, and buttons into assignable MIDI Controls that can be mapped in the DAW.
Mon/0 Toggles surface between DAW Mode and MIDI Mode

Control24 - Logic Pro

Channel Strips
EQ Assigns EQ editor for selected channel across channel knobs. Use Channel Bar Scroll buttons to access additional parameters.
Insert Assigns Plug-in Editor for selected channel across channel knobs. Select plug-in with knob buttons.
Send Assigns Sends for selected channel across channel knobs.
Record Arms the assigned audio track of the Channel.
Solo Solos the Channel.
Mute Mutes the Channel.
Auto Cycles through Automation modes on the select
Select Sets the Channel to the Select state.
Knob Changes the assigned parameter.
Knob Button Changes the assigned parameter.
Track Meters Displays Stereo metering for tracks.
Bank Mode
The assignment buttons are used to assign controls to the Knobs.
Pan (Default) Assigns Pan to knobs.
Send A Assigns Send 1 to knobs. Assigns Send 6 to knobs when F-J is enabled. Use Channel Bar Scroll Left and Right to switch parameters.
Send B Assigns Send 2 to knobs. Assigns Send 7 to knobs when F-J is enabled. Use Channel Bar Scroll Left and Right to switch parameters.
Send C Assigns Send 3 to knobs. Assigns Send 8 to knobs when F-J is enabled. Use Channel Bar Scroll Left and Right to switch parameters.
Send D Assigns Send 4 to knobs. Use Channel Bar Scroll Left and Right to switch parameters.
Send E Assigns Send 5 to knobs. Use Channel Bar Scroll Left and Right to switch parameters.
F-J Toggles between Sends 1-5 and 6-8 for Send A-E buttons.
Input Shows Channel Inputs across LCD
Output Shows Channel Outputs across LCD.
Assign Enables knobs to change source or destination for Sends, Input, or Output mode. Use knob button to confirm selection.
PrePost Sets knob buttons to PrePost mode when in Sends Mode.
Send Mute Sets knob buttons to Send Mute mode when in Sends Mode.
Flip Flips knobs to faders.
Show Channel Names Shows track name in Channel LCD when held down.
Show Values Shows value for assigned knob parameter.
Master Faders Toggles last Channel Fader to be Master Fader
Automation
Read Sets selected Channel in to Read Mode
Write Sets selected Channel to Write Mode
Touch Sets selected Channel to Touch Mode
Latch Sets selected Channel to Latch Mode
Off Sets selected Channel to Off Mode
Volume Toggles Enable for Volume Automation
Pan Toggles Enable for Pan Automation
Mute Toggles Enable for Mute Automation
Send LvL Toggles Enable for Send Level Automation
Plug-In Toggles Enable for Plug-In Automation
Transport
Play Starts playhead at current position in Timeline.
Stop Stops playhead at current position in Timeline.
Record Starts Record Mode for playhead
Rewind Move playhead backwards in Timeline.
Fast Forward Moves playhead forward in Timeline.
RTZ Moves playhead to beginning of Timeline.
GTE Moves playhead to end of Timeline.
Pre Roll Enables Count-In
In Sets start point of selection in Timeline.
Out Sets end point of selection in Timeline.
Shift+In Sets drop start point of selection in Timeline.
Shift+Out Sets drop end point of selection in Timeline.
Option+In Goest to start of loop region.
Option+Out Goes to end of loop region.
Loop Play/Loop Rec Toggles Loop mode for loop selection in Timeline.
Quick Punch Toggles Punch mode for selection in Timeline.
Audition Toggles Replace
Ext Trans Toggles Metronome
Counter Mode Select Changes Counter Mode in Counter LCD.
Counter Displays Counter for current session.
Utility
Save Press the Save button to save.
Press Shift + Save button to open the Save As dialog.
Undo Press to undo the last edit.
Shift+Undo Press to redo edit.
Enter Confirm selection
Cancel Cancel selection
Solo Clear Clears all track Solos in project.
Group Buttons
Suspend Toggles group suspend.
Navigation
Bank Left Banks 24 tracks left/Scrolls 1 track left in Nudge mode
Bank Right Banks 24 tracks right/Scrolls 1 track right in Nudge mode
Nudge Toggles Nudge mode On/Off
Up Scrolls to next track in Arrangement.
Down Scrolls to previous track in Arrangement.
Left Scroll to previous track in MIxer.
Right Scroll to next track in Mixer.
Zoom Enables Zoom mode for the cursor keys. Left/Right zooms horizontal for the Arrangement window. Up/Down zooms vertical for the Arrangement window.
Navigate Enables Marker Mode for the cursor keys. Left/Right navigate between marker, Down creates marker at playhead position.
Plug-in Buttons for C24 and Control 24
Master Bypass Bypass selected plug-in on Channel.
Params Show plug-in parameters for selected plug-in on Channel. Press again to display plug-ins on channel across LCD.
Window Buttons
Mix Displays Mixer Window
Edit Displays Arrange Window
MemLoc Displays Marker Window
Transport Displays Transport
Status Displays Event Editor
Zoom Preset 1 Displays Screenset 1
Zoom Preset 2 Displays Screenset 2
Zoom Preset 3 Displays Screenset 3
Zoom Preset 4 Displays Screenset 4
Zoom Preset 5 Displays Screenset 5
Edit
Copy Copy selected region in Arrange Window
Delete Deletes selected region in Arrange Window
Cut Cuts selected region in Arrange Window
Paste Pastes region in Arrange Window
Modifiers
Shift Enables Shift Modifier.
Option Enables Option Modifier.
Control Enables Control Modifier.
Command Enables Command Modifier.
V-Window Mode
With the V-Window feature, users can instantly control any plug-ins or controls on screen through their control surface's channel strip with a touch of a button.
Master Fader Press once to enable Master Fader control. Press a second time to enable V-Window mode for the 24th channel fader. Press a 3rd time to cycle back to basic channel control.
Mute While in V-Window mode, the Mute button on the last channel strip will cycle through the various V-Window Modes which are listed below:
VButton: Use this mode to interact with button controls. The mouse will stay in its place and activate a button press when the fader is touched.
VButtonSet: Use this mode to create and cycle through different button set points. With the mouse hovering above the on screen button's position press Shift+Solo on the control surface to set a Pin at that location. Using the fader in this mode will cylce between multiple Pins to use with VButton mode.
VWKnob: Use this mode when interacting with knob controls on the plug-ins GUI.
VWHSlider: Use this mode when interacting with horizontal slider controls on the plug-ins GUI.
VWVSlider: Use this mode when interacting with vertically slider controls on the plug-ins GUI.
Solo While in V-Window Mode, pressing the Solo button will pin the mouse location and revert to that location any time the fader is touched. Once the fader is released, the mouse is also returned to that pin position. This way it is very easy to pin a parameter and instantly control it without having to worry with the mouse cursor is on the screen.
Select Use the Select button while in V-Window mode to reset the fader position.
MIDI Mode
MIDI Mode converts the surfaces faders, knobs, and buttons into assignable MIDI Controls that can be mapped in the DAW.
Mon/0 Toggles surface between DAW Mode and MIDI Mode

Control24 - Studio One / Fender Studio

Channel Strips
Record Arms the assigned audio track of the Channel.
Solo Solos the Channel (with Momentary mode).
Mute Mutes the Channel (with Momentary mode).
Auto Cycles through Automation modes on track.
Select Sets the Channel to the Select state.
Knob Changes the assigned parameter.
Knob Button Sets assigned parameter to default value
Track Meters Displays metering for tracks. Currenlty supports one meter per channel.
Bank Mode
The assignment buttons are used to assign controls to the Knobs.
Pan (Default) Shows the track names in the LED strip and assigns Knobs to Channel Pan.
Send A,B,C,D,E Assigns Knob to Sends
First Press - Modify send level of the selected channel.
Additional Presses - Cycle through sends 1-8 to modify sends 1-8 for all tracks.
Input, Output Modify track parameters of the selected Channel.
Bypass all plug-ins.
Monitoring on/off.
Select Channel Input.
Select Channel Output.
Bypass Sends 1-4.
Master Bypass Bypass for Inserts 1-8 of the selected Channel.
Insert/Params Sets the V-Pots to Control Link mode.
Flip Flips knob assignment to faders.
Show Channel Names Shows Track names when in Plug-in Edit mode.
Master Faders Toggles last Channel Fader to be Master Fader
Automation
Write Sets Automation to Write mode for the selected Channel.
Touch Sets Automation to Touch mode for the selected Channel.
Latch Sets Automation to Latch mode for the selected Channel.
Read Sets Automation to Read mode for the selected Channel.
Off Sets Automation to Off mode for the selected Channel.
Transport
Play Starts playhead at current position in Timeline.
Stop Stops playhead at current position in Timeline. (Press twice to Return to Zero)
Record Starts Record Mode for playhead
Rewind Move playhead backwards in Timeline.
Fast Forward Moves playhead forward in Timeline.
RTZ Return to zero.
Loop Play/Loop Rec Toggles Loop mode for loop selection in Timeline.
Quick Punch Toggles Punch mode for selection in Timeline.
Online Enables Marker Mode. Use Rewind to go to previous marker/Use Fast forward to go to next marker.
Counter Displays Counter for current session. Counter mode can be changed in DAW.
Soft Keys
Press Show Values Button to access Views Mode
Mixer View Buttons (Filters tracks shown on Channels)
Knob Button 1 Shows all Studio One Channels.
Knob Button 2 Shows all available Inputs
Knob Button 3 Shows all Audio type tracks
Knob Button 4 Shows all Instrument type tracks
Knob Button 5 Shows all FX type tracks
Knob Button 6 Shows all Bus type tracks
Knob Button 7 Shows all available Outputs
Knob Button 8 Shows all Remote User tracks
Function keys (Keys are predefined but can be modified with Mackie Control Device editor)
F1 Show Inputs
F2 Show Track
F3 Show Mix Console
F4 Open Channel
F5 Add Insert
F6 Add Send
F7 Show Inserts Window
F8 Toggle Floating Window
Navigation
Bank Left Banks tracks left/Scrolls 1 track left in Nudge mode
Bank Right Banks tracks right/Scrolls 1 track right in Nudge mode
Nudge Toggles Nudge mode On/Off
The cursor buttons operate in several modes.
Zoom Horizontal and vertical zoom when zoom button is enabled.
Up Moves up track selection or list/Zooms out vertically
Down Moves down track selection or list/Zooms in vertically
Left Moves up track selection or list/Zooms out horizontally
Right Moves down track selection or list/Zooms in horizontally
Utility
Save Press the Save button to save.
Press Shift + Save button to open the Save As dialog.
Undo Press to undo the last edit.
Enter Confirm selection
Cancel Cancel selection
V-Window Mode
With the V-Window feature, users can instantly control any plug-ins or controls on screen through their control surface's channel strip with a touch of a button.
Master Fader Press once to enable Master Fader control. Press a second time to enable V-Window mode for the 24th channel fader. Press a 3rd time to cycle back to basic channel control.
Mute While in V-Window mode, the Mute button on the last channel strip will cycle through the various V-Window Modes which are listed below:
VButton: Use this mode to interact with button controls. The mouse will stay in its place and activate a button press when the fader is touched.
VButtonSet: Use this mode to create and cycle through different button set points. With the mouse hovering above the on screen button's position press Shift+Solo on the control surface to set a Pin at that location. Using the fader in this mode will cylce between multiple Pins to use with VButton mode.
VWKnob: Use this mode when interacting with knob controls on the plug-ins GUI.
VWHSlider: Use this mode when interacting with horizontal slider controls on the plug-ins GUI.
VWVSlider: Use this mode when interacting with vertically slider controls on the plug-ins GUI.
Solo While in V-Window Mode, pressing the Solo button will pin the mouse location and revert to that location any time the fader is touched. Once the fader is released, the mouse is also returned to that pin position. This way it is very easy to pin a parameter and instantly control it without having to worry with the mouse cursor is on the screen.
Select Use the Select button while in V-Window mode to reset the fader position.
MIDI Mode
MIDI Mode converts the surfaces faders, knobs, and buttons into assignable MIDI Controls that can be mapped in the DAW.
Mon/0 Toggles surface between DAW Mode and MIDI Mode

Control24 - Cubase/Nuendo

Channel Strips
EQ Assigns EQ editor for selected channel across channel knobs. Use Channel Bar Scroll buttons to access additional parameters.
Insert Assigns Plug-in Editor for selected channel across channel knobs. Use Channel Bar Scroll buttons to access plug-in parameters.
Send Assigns Sends for selected channel across channel knobs.
Record Arms the assigned audio track of the Channel.
Solo Solos the Channel.
Mute Mutes the Channel.
Auto Cycles through Read/Write Mode on track
Select Sets the Channel to the Select state.
Knob Changes the assigned parameter.
Knob Button
Track Meters Displays Stereo metering for tracks.
Bank Mode
The assignment buttons are used to assign controls to the Knobs.
Pan (Default) Shows pan position in LED Strip. Knob controls pan position.
Send A Assigns Send 1 to knobs. Assigns Send 6 to knobs when F-J is enabled. Use Channel Bar Scroll Left and Right to switch parameters.
Send B Assigns Send 2 to knobs. Assigns Send 7 to knobs when F-J is enabled. Use Channel Bar Scroll Left and Right to switch parameters.
Send C Assigns Send 3 to knobs. Assigns Send 8 to knobs when F-J is enabled. Use Channel Bar Scroll Left and Right to switch parameters.
Send D Assigns Send 4 to knobs. Use Channel Bar Scroll Left and Right to switch parameters.
Send E Assigns Send 5 to knobs. Use Channel Bar Scroll Left and Right to switch parameters.
F-J Toggles between Sends 1-5 and 6-8 for A-E buttons.
Send parameters 1st parameter is Send level.
2nd parameter is bypass for Send assignment.
3rd parameter is Pre/Post.
4th parameter is pan for send.
5th parameter is Send assignment.
6th parameter is Master send bypass for channel.
Input, Output Assign channel parameters to knobs. Use Channel bar scroll Left and Right to cycle through parameters.
Channel Parameters 1st parameter is channel output.
2nd parameter is input monitoring on channel.
3rd parameter is channel input.
4th parameter is pre-gain.
5th parameter is phase invert.
Soft Keys Assigns knob buttons on Channel strips to be soft key buttons.
Flip Flips knobs to faders.
Automation
Write Toggles Write automation for all channels.
Touch Sets Automation to Touch automation for all channels. When in Touch mode, pressing again enables Cross-over automation mode.
Latch Sets Automation to Latch mode for all channels. When in Latch mode, pressing again enables Cross-over automation mode.
Read Toggles Read automation for all channels.
Write To Start Enables Write to Start Automation.
Write To End Enables Write To End Automation.
Write To All Enables Loop Automation.
There is no indication if Automation enables are On/Off
Vol Toggle Enable Volume Automation
Pan Toggle Enable Pan Automation
Mute Toggle Enable Mute Automation
Sends Toggle Enable Sends Automation
EQ Toggle Enable Send Mute Automation
Plugin Toggle Enable Plugin Automation
Output Meters Displays the Master Meter.
Master Faders Enables Master Fader control on the 24th channel of Control 24.
Transport
Play Starts playhead at current position in Timeline.
Stop Stops playhead at current position in Timeline.
Record Starts Record Mode for playhead
Rewind Move playhead backwards in Timeline.
Fast Forward Moves playhead forward in Timeline.
RTZ Returns playhead to beginning of Timeline.
GTE Sends playhead to end of Timeline.
Pre Roll Enables Pre Roll
Post Roll Enables Post Roll
Mark In Sets start point of selection in Timeline.
Mark Out Sets end point of selection in Timeline.
Loop Play/Loop Rec Toggles Loop mode for loop selection in Timeline.
Quick Punch Toggles Punch mode for selection in Timeline.
Counter Displays Counter for current session. Counter mode can be changed in DAW.
Edit
Copy Copy Selected Region
Cut Cut Selected Region
Delete Delete Selected Region
Capture Duplicate Selected Region
Separate Separate Region at Playhead
Paste Paste Region
Utility
Save Save the current session.
Undo Undo the last action.
Redo Redo the last action.
Window Buttons
Mix Opens MixConsole Window
WinCfg Opens Status Window
Memloc Opens Memory Locator Window
Navigation
Bank Left Banks tracks left/Scrolls 1 track left in Nudge mode
Bank Right Banks tracks right/Scrolls 1 track right in Nudge mode
Nudge Toggles Nudge mode On/Off
There are several different modes available for the cursor keys and wheel.
Scrub Enables Scrub mode for the wheel.
Shuttle Enables Shuttle Mode for the wheel.
Navigate/Nav Enables Marker Mode. Use Wheel or Left/Right cursor keys to navigate between markers. Down cursor key creates marker at playhead.
Zoom Enables Zoom mode for the wheel and cursor keys.
Zoom+Shift Enables Track Zoom for the wheel and cursor keys. Track zoom increases/decreases track height.
Zoom+Option Enables Wave Zoom for the wheel and cursor keys. Wave zoom increases waveform view in region.
SelAdj Enables Nudge trim mode for the wheel and cursor keys. Use Left/Right cursor keys to change between start/end of region. Use Up/Down cursor keys or wheel to trim.
Function Keys
F1-F10 Acts as softkeys for Steinberg. Can be mapped in the Studio Setups window when the Control 24 is selected.
Edit
Shuffle Toggles Banking mode follow for Bank and Scroll buttons.
When Follow mode is on, Mixer in Cubase moves to match what is shown on Control surface. (Must have track count in Cubase view match control surface layout.)
V-Window Mode
With the V-Window feature, users can instantly control any plug-ins or controls on screen through their control surface's channel strip with a touch of a button.
Master Fader Press once to enable Master Fader control. Press a second time to enable V-Window mode for the 24th channel fader. Press a 3rd time to cycle back to basic channel control.
Mute While in V-Window mode, the Mute button on the last channel strip will cycle through the various V-Window Modes which are listed below:
VButton: Use this mode to interact with button controls. The mouse will stay in its place and activate a button press when the fader is touched.
VButtonSet: Use this mode to create and cycle through different button set points. With the mouse hovering above the on screen button's position press Shift+Solo on the control surface to set a Pin at that location. Using the fader in this mode will cylce between multiple Pins to use with VButton mode.
VWKnob: Use this mode when interacting with knob controls on the plug-ins GUI.
VWHSlider: Use this mode when interacting with horizontal slider controls on the plug-ins GUI.
VWVSlider: Use this mode when interacting with vertically slider controls on the plug-ins GUI.
Solo While in V-Window Mode, pressing the Solo button will pin the mouse location and revert to that location any time the fader is touched. Once the fader is released, the mouse is also returned to that pin position. This way it is very easy to pin a parameter and instantly control it without having to worry with the mouse cursor is on the screen.
Select Use the Select button while in V-Window mode to reset the fader position.
MIDI Mode
MIDI Mode converts the surfaces faders, knobs, and buttons into assignable MIDI Controls that can be mapped in the DAW.
Mon/0 Toggles surface between DAW Mode and MIDI Mode

Control24 - MixBus

Channel Strips
Record Arms the assigned audio track of the Channel.
Solo Solos the Channel
Mute Mutes the Channel
Select Sets the Channel to the Select state.
Knob Changes the assigned parameter.
Knob Button Sets assigned parameter to default value
When in Plug-In Mode, selects plug-in to edit.
Track Meters Displays metering for tracks. Currenlty supports one meter per channel.
Bank Mode
The assignment buttons are used to assign controls to the Knobs.
Pan (Default) Shows the track names in the LED strip and assigns Knobs to Channel Pan.
Send A,B,C,D,E Assigns Knob to Sends
Modify send levels of the selected channel.
Input, Output Modify IO parameters of channels
Press multiple times to cycle through input and output parameters
Insert/Params Sets the V-Pots to PlugIn Edit mode.
Flip Flips knob assignment to faders.
Show Channel Names Shows Track names when in Plug-in Edit mode.
Master Faders Toggles last Channel Fader to be Master Fader
Transport
Play Starts playhead at current position in Timeline.
Stop Stops playhead at current position in Timeline. (Press twice to Return to Zero)
Record Starts Record Mode for playhead
Rewind Move playhead backwards in Timeline.
Fast Forward Moves playhead forward in Timeline.
Loop Play/Loop Rec Toggles Loop mode for loop selection in Timeline.
In Toggles Punch In for Arrangement
Out Toggles Punch Out for Arrangement
Counter Mode Select Toggles Counter Display
Counter Displays Counter for current session. Counter mode can be changed in DAW.
Trigger Buttons
Post Roll Triggers selected Clip to play.
Quick Punch Triggers selected Scene to play.
PrePost Triggers selected Scene to play.
Scrub Triggers selected Scene to play.
Send Mute Stops all clips.
Ext Trans Triggers Back to Arrangement when in clip play.
Navigation
Bank Left Banks tracks left/Scrolls 1 track left in Nudge mode
Bank Right Banks tracks right/Scrolls 1 track right in Nudge mode
Nudge Toggles Nudge mode On/Off
The cursor buttons operate in several modes.
Zoom Switches cursor keys to Zoom mode.
Navigate Switches cursor keys to Marker mode.
Up Moves Up Selection in Session/Arrangment View.
Down Moves Down Selection in Session/Arrangement View.
Creates Marker in Arrangement at Playhead.
Left Moves Left Selection in Session View.
Zooms Out in Arrangement View
Moves to Previous Marker in Arrangement.
Right Moves Right Selection in Session View.
Zooms In in Arrangement View
Moves to Next Marker in Arrangement.
Wheel
There are two modes to use with the wheel
Scrub Changes the Wheel to Scene mode. Wheel moves up and down the scenes in Session view.
Shuttle Changes the Wheel to Navigation mode. Wheel moves playhead forward and back through timeline.
Utility
Undo Press to undo the last edit.
Shift+Undo Press to redo edit.
Pencil Tool Toggles Draw
Grab Tool Toggles Follow
Soft Keys
Use the Ableton Live MIDI mapping mode to map keys to functions.
F1 Maps F#2 key
F2 Maps G2 key
F3 Maps G#2 key
F4 Maps A2 key
F5 Maps A#2 key
F6 Maps B2 key
F7 Maps C3 key
F8 Maps C#3 key
F9 Maps D3 key
F10 Maps D#3 key
V-Window Mode
With the V-Window feature, users can instantly control any plug-ins or controls on screen through their control surface's channel strip with a touch of a button.
Master Fader Press once to enable Master Fader control. Press a second time to enable V-Window mode for the 24th channel fader. Press a 3rd time to cycle back to basic channel control.
Mute While in V-Window mode, the Mute button on the last channel strip will cycle through the various V-Window Modes which are listed below:
VButton: Use this mode to interact with button controls. The mouse will stay in its place and activate a button press when the fader is touched.
VButtonSet: Use this mode to create and cycle through different button set points. With the mouse hovering above the on screen button's position press Shift+Solo on the control surface to set a Pin at that location. Using the fader in this mode will cylce between multiple Pins to use with VButton mode.
VWKnob: Use this mode when interacting with knob controls on the plug-ins GUI.
VWHSlider: Use this mode when interacting with horizontal slider controls on the plug-ins GUI.
VWVSlider: Use this mode when interacting with vertically slider controls on the plug-ins GUI.
Solo While in V-Window Mode, pressing the Solo button will pin the mouse location and revert to that location any time the fader is touched. Once the fader is released, the mouse is also returned to that pin position. This way it is very easy to pin a parameter and instantly control it without having to worry with the mouse cursor is on the screen.
Select Use the Select button while in V-Window mode to reset the fader position.
MIDI Mode
MIDI Mode converts the surfaces faders, knobs, and buttons into assignable MIDI Controls that can be mapped in the DAW.
Mon/0 Toggles surface between DAW Mode and MIDI Mode

Control24 - Performer

Channel Strips
Record Arms the assigned audio track of the Channel.
Solo Solos the Channel.
Mute Mutes the Channel.
Select Sets the Channel to the Select state.
Knob Changes the assigned parameter.
Knob Button Sets assigned parameter to default value
In Insert Mode the Knob button will toggle bypass on the plug-in.
Track Meters Displays metering for tracks. Currenlty supports one meter per channel.
Bank Mode
The assignment buttons are used to assign controls to the Knobs.
Pan (Default) Shows the track names in the LED strip and assigns Knobs to Channel Pan.
Send A,B,C,D,E Assigns Knob to Sends
When Bank assignment is set to Sends. Up/Down cursor keys cycle through send slots.
Input, Output Opens bank assignment options. Use the knob buttons to select assignment for knobs.
Params Assigns Insert mode for the knobs. Use the knobs to select plug-in to insert on channel.
When Bank assignment is set to inserts. Up/Down cursor keys cycle through insert slots.
Assign While in Insert Mode, hold down the In/Edit button and press the knob button on the
Safe Hold down and use the knob to cycle through presets for the selected plug-in.
Flip Flips knob assignment to faders.
Master Faders Toggles last Channel Fader to be Master Fader
Automation
To Assign automation to a channel. Hold down the automation button and press the Channel button you wish to assign automation to.
Must be in Pan or Send Assignment mode for Automation Assignment to Work.
Write Sets Automation to Write mode for the selected Channel.
Touch Sets Automation to Touch mode for the selected Channel.
Latch Sets Automation to Latch mode for the selected Channel.
Read Sets Automation to Read mode for the selected Channel.
Trim Sets Automation to Trim Touch mode for selected Channel.
Transport
Play Starts playhead at current position in Timeline.
Stop Stops playhead at current position in Timeline. (Press twice to Return to Zero)
Record Starts Record Mode for playhead
Rewind Move playhead backwards in Timeline.
Fast Forward Moves playhead forward in Timeline.
Audition Toggles Audible Mode
Online Toggles Metronome
In Set Left
Out Set Right
Quick Punch Set Left Drop
Counter Displays Counter for current session. Counter mode can be changed in DAW.
Navigation
Bank Left Banks tracks left/Scrolls 1 track left in Nudge mode
Bank Right Banks tracks right/Scrolls 1 track right in Nudge mode
Nudge Toggles Nudge mode On/Off
The cursor buttons operate in several modes.
Zoom Horizontal and vertical zoom when zoom button is enabled.
Up Moves up track selection or list/Zooms out vertically
When Bank assignment is set to inserts. Up cursor key cycle through insert slots.
When Bank assignment is set to sends. Up cursor key cycle through send slots.
Down Moves down track selection or list/Zooms in vertically
When Bank assignment is set to inserts. Down cursor key cycle through insert slots.
When Bank assignment is set to sends. Down cursor key cycle through insert slots.
Left Moves up track selection or list/Zooms out horizontally
Right Moves down track selection or list/Zooms in horizontally
Utility
Save Press the Save button to save.
Press Shift + Save button to open the Save As dialog.
Undo Press to undo the last edit.
Enter Confirm selection
Cancel Cancel selection
V-Window Mode
With the V-Window feature, users can instantly control any plug-ins or controls on screen through their control surface's channel strip with a touch of a button.
Master Fader Press once to enable Master Fader control. Press a second time to enable V-Window mode for the 24th channel fader. Press a 3rd time to cycle back to basic channel control.
Mute While in V-Window mode, the Mute button on the last channel strip will cycle through the various V-Window Modes which are listed below:
VButton: Use this mode to interact with button controls. The mouse will stay in its place and activate a button press when the fader is touched.
VButtonSet: Use this mode to create and cycle through different button set points. With the mouse hovering above the on screen button's position press Shift+Solo on the control surface to set a Pin at that location. Using the fader in this mode will cylce between multiple Pins to use with VButton mode.
VWKnob: Use this mode when interacting with knob controls on the plug-ins GUI.
VWHSlider: Use this mode when interacting with horizontal slider controls on the plug-ins GUI.
VWVSlider: Use this mode when interacting with vertically slider controls on the plug-ins GUI.
Solo While in V-Window Mode, pressing the Solo button will pin the mouse location and revert to that location any time the fader is touched. Once the fader is released, the mouse is also returned to that pin position. This way it is very easy to pin a parameter and instantly control it without having to worry with the mouse cursor is on the screen.
Select Use the Select button while in V-Window mode to reset the fader position.
MIDI Mode
MIDI Mode converts the surfaces faders, knobs, and buttons into assignable MIDI Controls that can be mapped in the DAW.
Mon/0 Toggles surface between DAW Mode and MIDI Mode

Control24 - Ableton Live

Channel Strips
Record Arms the assigned audio track of the Channel.
Solo Solos the Channel
Mute Mutes the Channel
Select Sets the Channel to the Select state.
Knob Changes the assigned parameter.
Knob Button Sets assigned parameter to default value
When in Plug-In Mode, selects plug-in to edit.
Track Meters Displays metering for tracks. Currenlty supports one meter per channel.
Bank Mode
The assignment buttons are used to assign controls to the Knobs.
Pan (Default) Shows the track names in the LED strip and assigns Knobs to Channel Pan.
Send A,B,C,D,E Assigns Knob to Sends
Modify send levels of the selected channel.
Input, Output Modify IO parameters of channels
Press multiple times to cycle through input and output parameters
Insert/Params Sets the V-Pots to PlugIn Edit mode.
Flip Flips knob assignment to faders.
Show Channel Names Shows Track names when in Plug-in Edit mode.
Master Faders Toggles last Channel Fader to be Master Fader
Transport
Play Starts playhead at current position in Timeline.
Stop Stops playhead at current position in Timeline. (Press twice to Return to Zero)
Record Starts Record Mode for playhead
Rewind Move playhead backwards in Timeline.
Fast Forward Moves playhead forward in Timeline.
Loop Play/Loop Rec Toggles Loop mode for loop selection in Timeline.
In Toggles Punch In for Arrangement
Out Toggles Punch Out for Arrangement
Counter Mode Select Toggles Counter Display
Counter Displays Counter for current session. Counter mode can be changed in DAW.
Trigger Buttons
Post Roll Triggers selected Clip to play.
Quick Punch Triggers selected Scene to play.
PrePost Triggers selected Scene to play.
Scrub Triggers selected Scene to play.
Send Mute Stops all clips.
Ext Trans Triggers Back to Arrangement when in clip play.
Navigation
Bank Left Banks tracks left/Scrolls 1 track left in Nudge mode
Bank Right Banks tracks right/Scrolls 1 track right in Nudge mode
Nudge Toggles Nudge mode On/Off
The cursor buttons operate in several modes.
Zoom Switches cursor keys to Zoom mode.
Navigate Switches cursor keys to Marker mode.
Up Moves Up Selection in Session/Arrangment View.
Down Moves Down Selection in Session/Arrangement View.
Creates Marker in Arrangement at Playhead.
Left Moves Left Selection in Session View.
Zooms Out in Arrangement View
Moves to Previous Marker in Arrangement.
Right Moves Right Selection in Session View.
Zooms In in Arrangement View
Moves to Next Marker in Arrangement.
Wheel
There are two modes to use with the wheel
Scrub Changes the Wheel to Scene mode. Wheel moves up and down the scenes in Session view.
Shuttle Changes the Wheel to Navigation mode. Wheel moves playhead forward and back through timeline.
Utility
Undo Press to undo the last edit.
Shift+Undo Press to redo edit.
Pencil Tool Toggles Draw
Grab Tool Toggles Follow
Soft Keys
Use the Ableton Live MIDI mapping mode to map keys to functions.
F1 Maps F#2 key
F2 Maps G2 key
F3 Maps G#2 key
F4 Maps A2 key
F5 Maps A#2 key
F6 Maps B2 key
F7 Maps C3 key
F8 Maps C#3 key
F9 Maps D3 key
F10 Maps D#3 key
V-Window Mode
With the V-Window feature, users can instantly control any plug-ins or controls on screen through their control surface's channel strip with a touch of a button.
Master Fader Press once to enable Master Fader control. Press a second time to enable V-Window mode for the 24th channel fader. Press a 3rd time to cycle back to basic channel control.
Mute While in V-Window mode, the Mute button on the last channel strip will cycle through the various V-Window Modes which are listed below:
VButton: Use this mode to interact with button controls. The mouse will stay in its place and activate a button press when the fader is touched.
VButtonSet: Use this mode to create and cycle through different button set points. With the mouse hovering above the on screen button's position press Shift+Solo on the control surface to set a Pin at that location. Using the fader in this mode will cylce between multiple Pins to use with VButton mode.
VWKnob: Use this mode when interacting with knob controls on the plug-ins GUI.
VWHSlider: Use this mode when interacting with horizontal slider controls on the plug-ins GUI.
VWVSlider: Use this mode when interacting with vertically slider controls on the plug-ins GUI.
Solo While in V-Window Mode, pressing the Solo button will pin the mouse location and revert to that location any time the fader is touched. Once the fader is released, the mouse is also returned to that pin position. This way it is very easy to pin a parameter and instantly control it without having to worry with the mouse cursor is on the screen.
Select Use the Select button while in V-Window mode to reset the fader position.
MIDI Mode
MIDI Mode converts the surfaces faders, knobs, and buttons into assignable MIDI Controls that can be mapped in the DAW.
Mon/0 Toggles surface between DAW Mode and MIDI Mode

Control24 - LUNA

Channel Strips
Record Arms the assigned audio track of the Channel.
Solo Solos the Channel.
Mute Mutes the Channel.
Select Sets the Channel to the Select state.
Knob Changes the assigned parameter.
Knob Button Sets assigned parameter to default value
Solo Clear When lit, pressing clears all active solos.
Track Meters Displays metering for tracks. Currenlty supports one meter per channel.
Bank Mode
There are two ways to use the Send Mode button to assign Sends to the knobs.
Send A (Hold)+Knob Button Single Sends V-Pot mode. Press and hold the Send A button and then press the specified knob button to display that Send across all V-pots.
Send A Expanded Sends V-Pot mode. Press Send A to cycle through Send overview and detail pages, which allow control over the selected track's parameters.
Flip Flips V-Pot control to Faders.
Master Faders Press first time to toggle Master fader to be assigned to last fader on controller. Master Fader light will be solid in this mode.
Press second time to enable V-Window feature for last fader on controller. Master Fader Light will be flashing in this mode.
Automation
Touch Sets Automation to Touch mode for the selected Channel.
Read Sets Automation to Read mode for the selected Channel.
Trim Toggles Trim Mode for the selected Channel.
Transport
Play Starts playhead at current position in Timeline.
Stop Stops playhead at current position in Timeline. (Press twice to Return to Zero)
Record Starts Record Mode for playhead
Rewind Move playhead backwards in Timeline.
Fast Forward Moves playhead forward in Timeline.
RTZ Moves playhead to start of timeline
GTE Moves playhead to end of timeline
Counter Displays Counter for current session. Counter mode can be changed in DAW.
Navigation
Bank Left Banks tracks left/Scrolls 1 track left in Nudge mode
Bank Right Banks tracks right/Scrolls 1 track right in Nudge mode
Nudge Toggles Nudge mode On/Off
The cursor buttons operate in several modes.
Zoom Horizontal and vertical zoom when zoom button is enabled.
Up Moves up track selection or list/Zooms out vertically
Down Moves down track selection or list/Zooms in vertically
Left Moves to previous marker/Zooms out horizontally
Right Moves to next marker/Zooms in horizontally
Utility
Save Press the Save button to save.
Press Shift + Save button to open the Save As dialog.
Undo Press to undo the last edit.
Enter Confirm selection
Cancel Cancel selection
V-Window Mode
With the V-Window feature, users can instantly control any plug-ins or controls on screen through their control surface's channel strip with a touch of a button.
Master Fader Press once to enable Master Fader control. Press a second time to enable V-Window mode for the 24th channel fader. Press a 3rd time to cycle back to basic channel control.
Mute While in V-Window mode, the Mute button on the last channel strip will cycle through the various V-Window Modes which are listed below:
VButton: Use this mode to interact with button controls. The mouse will stay in its place and activate a button press when the fader is touched.
VButtonSet: Use this mode to create and cycle through different button set points. With the mouse hovering above the on screen button's position press Shift+Solo on the control surface to set a Pin at that location. Using the fader in this mode will cylce between multiple Pins to use with VButton mode.
VWKnob: Use this mode when interacting with knob controls on the plug-ins GUI.
VWHSlider: Use this mode when interacting with horizontal slider controls on the plug-ins GUI.
VWVSlider: Use this mode when interacting with vertically slider controls on the plug-ins GUI.
Solo While in V-Window Mode, pressing the Solo button will pin the mouse location and revert to that location any time the fader is touched. Once the fader is released, the mouse is also returned to that pin position. This way it is very easy to pin a parameter and instantly control it without having to worry with the mouse cursor is on the screen.
Select Use the Select button while in V-Window mode to reset the fader position.
MIDI Mode
MIDI Mode converts the surfaces faders, knobs, and buttons into assignable MIDI Controls that can be mapped in the DAW.
Mon/0 Toggles surface between DAW Mode and MIDI Mode

ProControl - Pro Tools

Important HUI Metering Information

The HUI protocol provides for stereo track metering. It does not provide for output metering. Pro Tools will not provide track metering if Eucon is enabled. Disable Eucon for track metering.

Important Insert Editing Information

Pro Tools limits HUI device plug-in editing to the first eight channels of the surface. You can bank and scroll a track to the first eight channels and select a plug-in to edit. Thereafter, you can bank and scroll while editing the plug-in.

Channel Strip
Record Arms the assigned audio track of the Channel (LED flashes when record-ready, lit when recording).
Option+ Record-enables all tracks (when pressed on non-enabled track).
Option+ Disables all tracks for recording (when pressed on enabled track).
Option+Shift+ Record-enables selected tracks only.
Alt+ Enables or clears Record Safe mode on channel (LED flashes briefly).
Option+Alt+ Enables or clears Record Safe on all channels.
Shift+Option+Alt+ Enables or clears Record Safe on selected channels only.
Insert Enables insert editor for selected Channel.
Double-click Directly accesses first assigned insert for editing.
Multiple double-clicks Cycles through inserts on channel.
Bypass+ Bypasses or enables all plug-ins on all inserts for channel (when Bypass mode enabled).
Bypass+Option+ Bypasses plug-ins on all channels (when Bypass mode enabled).
Solo Solos the Channel (LED lights when enabled).
Option+ Enables or clears solos on all channels.
Option+Shift+ Enables or clears solos on all selected channels.
Alt+ Enables or clears Solo Safe mode on channel (LED flashes briefly).
Option+Alt+ Enables or clears Solo Safe on all channels.
Shift+Option+Alt+ Enables or clears Solo Safe on selected channels only.
Mute Mutes the Channel (LED lights when enabled).
Option+ Enables or clears mutes on all channels.
Option+Shift+ Enables or clears mutes on all selected channels.
Auto Press to see auto mode.
+AUTOMATION MODES Hold down and select automation mode (WRITE, TOUCH, LATCH, TRIM, READ, OFF).
+Select Hold down and press channel select button to cycle through automation modes.
Option+Automation mode Changes automation mode on all channels.
Option+Shift+Automation mode Changes automation mode on all selected channels.
Select Selects track (LED lights when selected).
Shift+ Deselects single channel OR selects/deselects multiple channels.
Option+ Selects or deselects all channels.
Alt+ Changes SELECT state of channel and changes all others to opposite state (on lit switch).
Default+ Reset fader to 0 db.
Default+Option+ Reset all faders to 0 db.
Default+Option+Shift+ Reset all selected faders to 0 db.
Knob Adjust control assigned for bank mode.
Pan Mode - Adjust stereo pan for mono and stereo tracks.
Send A-E Modes - Adjust send volume.
Flip Send A-E Modes - Adjust send pan for mono/stereo sends.
Insert Edit Mode - Adjust plugin parameter for strips 1-8.
Cmd+ Fine mode (fine adjustments).
Alt+ Fine adjustments for Knob controls.
Knob Button Default+ Pan Mode - Reset pan to default
Send Mute Mode - Control send mute
Pre/Post Mode - Control send pre/post.
Insert Select Mode - Select insert A-D, E for strips 1-4.
Insert Edit Mode - Adjust discrete parameter for strips 1-4.
Option+ Toggles send pre/post for all channels (in Send mode).
Option+Shift+ Toggles send pre/post for all selected channels (in Send mode).
Default+ Returns channel's send level or pan to default.
Default+Option+ Returns all channel send levels/pans to default.
Default+Option+Shift+ Returns all selected channel send levels/pans to default.
Fader Track volume control.
Ctrl+ Clutch mode - disengages faders from Mix groups while held.
Master Record Toggles all enabled REC/RDY switches on and off.
Meters Displays stereo metering for tracks.

Buttons are used to set a bank mode which assign controls to the Knobs.

PAN
PAN Enables pan control on Knobs.
Press twice On stereo channels, edits right channel pan.
LCR,FrontRear,Rear,Divergence,Center,LFE,LR Stereo Pan Mode for mono / stereo tracks
Toggle between Pan L and Pan R for stereo tracks
Toggle between Pan L and Pan R for stereo sends when in send mode
SENDS
A Send A Mode - enables send level control on Knobs for Send A.
Assign+ Enters assign mode for send routing.
Insert+ Quick access to send level editing.
B Send B Mode - enables send level control on Knobs for Send B.
C Send C Mode - enables send level control on Knobs for Send C.
D Send D Mode - enables send level control on Knobs for Send D.
E Send E Mode - enables send level control on Knobs for Send E.
Flip
Flip Enters Flip mode (LED flashes).
Send levels mapped to faders.
Send pan controls mapped to Knobs.
Send mutes mapped to MUTE switches.
V-SEL controls send pre/post operation.
SWITCH FUNCTIONS
Pre/Post Sets knob buttons to Pre/Post mode when in Sends Mode.
Send Mute Sets knob buttons to Send Mute mode when in Sends Mode.
ASSIGN
Input Enters assign mode for input routing.
Assign+ Enters assign mode for input routing.
Output Enters assign mode for output routing.
Assign+ Enters assign mode for output routing.
Ctrl+Assign Confirms additional output assignment (during output assign).
INSERT BYPASS
Insert Bypass Enables Master Bypass mode (INSERT switches become bypass switches).
+Insert Toggles bypass for all plug-ins on channel (when Bypass mode enabled).
+Option+Insert Changes bypass status of all plug-ins on all channels (when Bypass mode enabled).
+Option+Shift+Insert Changes bypass status on all selected channels (when Bypass mode enabled).
AUTOMATION MODES
Hold down channel strip Auto button to select automation modes.
Read Sets selected Channel to Read Mode (AUTO LED green).
Option+ Arms all channels for Read mode.
Option+Shift+ Arms all selected channels for Read mode.
Write Sets selected Channel to Write Mode (AUTO LED red flashing/lit).
Option+ Arms all channels for Write mode.
Option+Shift+ Arms all selected channels for Write mode.
Touch Sets selected Channel to Touch Mode (AUTO LED red flashing/lit).
Option+ Arms all channels for Touch mode.
Option+Shift+ Arms all selected channels for Touch mode.
Latch Sets selected Channel to Latch Mode (AUTO LED red flashing/lit).
Option+ Arms all channels for Latch mode.
Option+Shift+ Arms all selected channels for Latch mode.
Trim Toggles TRIM mode on/off for track (TDM only).
Alt+ Displays trim delta value instead of absolute value (while adjusting).
Option+ Arms all channels for Trim mode.
Option+Shift+ Arms all selected channels for Trim mode.
Off Disables automation on channel (AUTO LED off).
Option+ Disables automation on all channels.
Option+Shift+ Disables automation on all selected channels.
AUTO ENABLES
Volume Enables automation for fader.
Option+ Toggles all automation parameters to this state.
Alt+ Changes FADER state and sets other five to opposite.
Pan Enables automation for pan (enables both channel and send pan if both disabled).
Option+ Toggles all automation parameters to this state.
Alt+ Changes PAN state and sets other five to opposite.
Mute Enables automation for mute.
Option+ Toggles all automation parameters to this state.
Alt+ Changes MUTE state and sets other five to opposite.
Send LvL Enables automation for send.
Option+ Toggles all automation parameters to this state.
Alt+ Changes SEND state and sets other five to opposite.
Plug-In Enables automation for plug-ins.
Option+ Toggles all automation parameters to this state.
Alt+ Changes PLUG IN state and sets other five to opposite.
Send Mute Enables automation for send mute.
Option+ Toggles all automation parameters to this state.
Alt+ Changes SEND MUTE state and sets other five to opposite.
Transport
Play Begins playback from current cursor position.
Shift+ Initiates half-speed playback.
Stop Stops playback or recording.
Shift+ Aborts the current record pass.
Record Arms Pro Tools for recording (LED flashes).
Ctrl+ Cycles through record modes (normal, QuickPunch, Loop).
Rewind Rewinds the session from current cursor position (incremental or continuous depending on preferences).
Shift+ Return-to-Zero (same as RTZ button).
Fast Forward Fast-forwards the session from current cursor position (incremental or continuous).
Shift+ Go-To-End (same as END button).
RTZ Sets playback cursor to the beginning of the session.
Ctrl+ Write to Start (writes automation from insertion point backward to beginning).
Ctrl+Shift+ Write to All (writes automation to entire selection/track).
Ctrl+Option+ Suppresses warning dialog for Write to Start.
GTE Sets playback cursor to the end of the session.
Ctrl+ Write to End (writes automation from insertion point forward to end).
Ctrl+Shift+ Write to All (writes automation to entire selection/track).
Ctrl+Option+ Suppresses warning dialog for Write to End.
Pre Roll Activates pre-roll.
Alt+ Enters pre-roll time value (numeric entry mode).
Post Roll Activates post-roll.
Alt+ Enters post-roll time value (numeric entry mode).
Mark In Marks In edit point during playback / Sets start point of selection in Timeline.
Alt+ Manually enters selection start time.
Option+Left Arrow Centers left side of waveform selection in Edit Window.
Mark Out Marks Out edit point during playback / Sets end point of selection in Timeline.
Alt+ Manually enters selection end time.
Option+Right Arrow Centers right side of waveform selection in Edit Window.
Loop Play Toggles Loop Playback mode (LED lit when enabled).
Ctrl+ Places Pro Tools into Loop Record mode.
Loop Record Enables Loop Record.
Quick Punch Toggles QuickPunch recording mode (LED lit when enabled).
Audition Press with PRE/POST/IN/OUT to play audio; playback continues until pressed again.
Alt+Option+PRE Plays audio from pre-roll point through selection start plus post-roll.
Alt+Option+IN Plays audio from pre-roll point through selection start plus post-roll.
Alt+Option+OUT Plays audio from before selection end (pre-roll) through selection end plus post-roll.
Alt+Option+POST Plays audio from before selection end (pre-roll) through selection end plus post-roll.
Online Places Pro Tools online or offline (LED lit when online).
Ctrl+ Cycles through available machine master choices (Pro Tools, Serial Machine, ADAT).
Scrub Enables Scrub mode (rotate wheel to scrub forward/backward).
Option+ Begins scrubbing from selection end point.
Alt+ Fixed "fine scrub" resolution regardless of zoom level (while scrubbing).
Shift+ Creates selection using scrub wheel (starts at current position).
Shift+Option+ Modifies end of existing selection.
Left/Right Arrow Moves to selection start/end (during scrub).
Shuttle Enables Shuttle mode (rotate wheel to shuttle forward/backward).
Option+ Begins shuttling from selection end point.
Shift+ Creates selection using shuttle wheel.
Shift+Option+ Modifies end of existing selection.
Left/Right Arrow Moves to selection start/end (during shuttle).
Counter Displays Counter for current session. Counter mode can be changed in DAW.
DSP Edit
Insert/Params Toggles between Insert Display mode and Parameter mode.
Assign 1-8 Enables Assign for Inserts A-E. Use knobs in DSP Edit section to change selection.
Select 1-8 Selects Insert A-E for editing. Toggles insert parameters.
Bypass 1-8 Bypasses Inserts A-E.
Compare Compares current plug-in setting with previous (must have plug-in visible on-screen).
Default+ Returns plug-in to factory/user default setting.
Master Bypass Bypass selected plug-in on track.
In Parameter mode: Engages Master Bypass for selected plug-in (LED lights).
Channel Matrix
Goto Enables Marker Mode for Channel Matrix. Use Matrix 1-32 to jump to marker points.
1/A Use to scroll through pages for insert parameters.
2/B Use to scroll through pages for insert parameters.
Status
The Status buttons change the assignment for the Channel Matrix.
Select Assigns the channel matrix buttons to Channel Strip select.
Mute Assigns the channel matrix buttons to Channel strip mute.
Solo Assigns the channel matrix buttons to Channel Strip solo.
Rec/Rdy Assigns the channel matrix buttons to Channel Strip Record Arm.
Param/Pages Assigns the channel matrix buttons 1 and 2 to scroll through insert parameter pages.
Group Buttons
Create Creates group from selected channels (use Shift+Select on multiple channels first).
Suspend Suspends all Mix groups temporarily (LED flashes when enabled).
Status Shows Group ID status.
Select Switches the DSP Section from DAW Mode to MIDI Mode.
Utility
Save Press once to arm save, press again to complete save (LED flashes when armed).
Shift+ Opens Save As dialog.
F8/ESC Aborts the save process.
Undo Undo or Redo last edit operation (LED lit when Undo available, flashes when Redo available).
Cancel Cancel selection / Serves as Escape to cancel any assignment mode or on-screen modal dialog.
Solo Clear Clears all Solos on Channel Strip.
Keypad Buttons
0 Start/Stop Playback
1 Rewind
2 Fast Forward
3 Record Enable
4 Loop Playback
5 Loop Record
6 Quick Punch
7 Click
8 Count Off
9 MIDI Merge
. Inputs Decimal Point
+ Inputs Plus sign
- Inputs Subtract
* Inputs Asterisk
/ Inputs Divide
Enter Creates Marker at current position
Clr Clear numerical input.
Navigation
Bank Left Swaps channels left eight at a time.
Option+ Banks to far-left position in session.
Bank Right Swaps channels right eight at a time.
Option+ Banks to far-right position in session.
Channel Left Scrolls channels left one at a time.
Option+ Scrolls to far-left position.
Channel Right Scrolls channels right one at a time.
Option+ Scrolls to far-right position.
Nudge Toggles Nudge mode On/Off (Bank Left/Right scroll 1 track when enabled).
Zoom Cycles through three modes: Navigation (LED off), Zoom (LED lit), Selection (LED flashing).
Navigation Mode (LED off):
Up Moves edit cursor or selection to previous track (marks in/out).
Shift+ Extends edit selection to previous track.
Alt+ Scrolls frontmost window upward.
Alt+Option+ Scrolls to top of session (Edit window).
Down Moves edit cursor or selection to next track (marks in/out).
Shift+ Extends edit selection to next track.
Alt+ Scrolls frontmost window downward.
Alt+Option+ Scrolls to bottom of session (Edit window).
Left Moves edit cursor to previous region boundary or sync point.
Shift+ Extends selection to preceding region boundary.
Option+ Centers left side of waveform selection in Edit Window.
Alt+ Scrolls frontmost window to the left (one page).
Alt+Option+ Scrolls to beginning of session (Edit window).
Ctrl+ Selects previous region.
Ctrl+Shift+ Extends selection to include previous region.
Right Moves edit cursor to next region boundary or sync point.
Shift+ Extends selection to forward region boundary.
Option+ Centers right side of waveform selection in Edit Window.
Alt+ Scrolls frontmost window to the right (one page).
Alt+Option+ Scrolls to end of session (Edit window).
Ctrl+ Selects next region.
Ctrl+Shift+ Extends selection to include next region.
Zoom Mode (LED lit):
Left Decreases horizontal zoom.
Right Increases horizontal zoom.
Up Increases vertical zoom.
Down Decreases vertical zoom.
Selection Mode (LED flashing):
Left Adjusts selection in-point with Scrub/Shuttle wheel.
Double-click Positions cursor at selection's left edge.
+Right+Wheel Adjusts selection time position while retaining duration.
Right Adjusts selection out-point with Scrub/Shuttle wheel.
Double-click Positions cursor at selection's right edge.
+Left+Wheel Adjusts selection time position while retaining duration.
Up Moves selection to previous track.
Shift+ Extends selection to previous track.
Option+ Removes selection from topmost track.
Down Moves selection to next track.
Shift+ Extends selection to next track.
Option+ Removes selection from bottommost track.
Window Buttons
Mix Brings Mix window to foreground (LED lights when active).
Edit Brings Edit window to foreground (LED lights when active).
MemLoc Opens or closes the Memory Locations window.
Transport Opens or closes the Transport window.
Plug-In Opens or closes the floating window for currently selected plug-in.
Status Opens or closes the Session Setup window.
Edit
Copy Copy selected region in Edit Window.
Delete Deletes selected region in Edit Window.
Cut Cuts selected region in Edit Window.
Paste Pastes region in Edit Window.
Capture Executes capture region function.
Separate Executes separate region function / Separates region at playhead.
Shuffle Enables Shuffle Mode in Edit Window.
Slip Enables Slip Mode in Edit Window.
Spot Enables Spot Mode in Edit Window.
Grid Enables Grid Mode in Edit Window.
Edit Mode Cycles through edit modes (Shuffle, Slip, Spot, Grid).
Edit Tool Cycles through main edit tools (Zoom, Trim, Select, Grabber, Smart Tool, Scrub, Pencil).
Trim Enables Trim Tool in Edit Window.
Select Enables Select Tool in Edit Window.
Grab Enables Grabber Tool in Edit Window.
Pencil Enables Pencil Tool in Edit Window.
Zoom Enables Zoom tool.
Scrub Enables Scrub tool (see Transport section for Scrub wheel functions).
Smart Tool Enables Smart tool.
V-Window Mode
With the V-Window feature, users can instantly control any plug-ins or controls on screen through their control surface's channel strip with a touch of a button.
Master Fader Press once to enable V-Window mode for the 8th channel fader. Press a 2nd time to cycle back to basic channel control.
Mute While in V-Window mode, the Mute button on the last channel strip will cycle through the various V-Window Modes which are listed below:
VButton: Use this mode to interact with button controls. The mouse will stay in its place and activate a button press when the fader is touched.
VButtonSet: Use this mode to create and cycle through different button set points. With the mouse hovering above the on screen button's position press Shift+Solo on the control surface to set a Pin at that location. Using the fader in this mode will cylce between multiple Pins to use with VButton mode.
VWKnob: Use this mode when interacting with knob controls on the plug-ins GUI.
VWHSlider: Use this mode when interacting with horizontal slider controls on the plug-ins GUI.
VWVSlider: Use this mode when interacting with vertically slider controls on the plug-ins GUI.
Solo While in V-Window Mode, pressing the Solo button will pin the mouse location and revert to that location any time the fader is touched. Once the fader is released, the mouse is also returned to that pin position. This way it is very easy to pin a parameter and instantly control it without having to worry with the mouse cursor is on the screen.
Select Use the Select button while in V-Window mode to reset the fader position.

MIDI Mode provides generic MIDI controller functionality. MIDI messages are sent/received with the V-Control-Pro Midi Mode port.

MIDI Mode
'Shift'+'F1' Toggle surface between DAW Mode and MIDI Mode
'Select' (Group Button) Toggle the DSP Section between DAW Mode and MIDI Mode.

ProControl - Logic Pro

Channel Strips
EQ Assigns EQ editor for selected channel across channel knobs. Use Channel Bar Scroll buttons to access additional parameters.
Insert Assigns Plug-in Editor for selected channel across channel knobs. Select plug-in with knob buttons.
Send Assigns Sends for selected channel across channel knobs.
Record Arms the assigned audio track of the Channel.
Solo Solos the Channel.
Mute Mutes the Channel.
Auto Cycles through Automation modes on the select
Input (C24) Toggles Input Monitoring for the channel.
Select Sets the Channel to the Select state.
Knob Changes the assigned parameter.
Knob Button Changes the assigned parameter.
Bank Mode
The assignment buttons are used to assign controls to the Knobs.
Pan (Default) Assigns Pan to knobs.
Send A Assigns Send 1 to knobs. Assigns Send 6 to knobs when F-J is enabled. Use Channel Bar Scroll Left and Right to switch parameters.
Send B Assigns Send 2 to knobs. Assigns Send 7 to knobs when F-J is enabled. Use Channel Bar Scroll Left and Right to switch parameters.
Send C Assigns Send 3 to knobs. Assigns Send 8 to knobs when F-J is enabled. Use Channel Bar Scroll Left and Right to switch parameters.
Send D Assigns Send 4 to knobs. Use Channel Bar Scroll Left and Right to switch parameters.
Send E Assigns Send 5 to knobs. Use Channel Bar Scroll Left and Right to switch parameters.
Input Shows Channel Inputs across LCD
Output Shows Channel Outputs across LCD.
Assign Enables knobs to change source or destination for Sends, Input, or Output mode. Use knob button to confirm selection.
PrePost Sets knob buttons to PrePost mode when in Sends Mode.
Send Mute Sets knob buttons to Send Mute mode when in Sends Mode.
Track Meters Displays Stereo metering for tracks.
Flip Flips knobs to faders.
Master Faders Toggles last Channel Fader to be Master Fader
Automation
Read Sets selected Channel in to Read Mode
Write Sets selected Channel to Write Mode
Touch Sets selected Channel to Touch Mode
Latch Sets selected Channel to Latch Mode
Off Sets selected Channel to Off Mode
Volume Toggles Enable for Volume Automation
Pan Toggles Enable for Pan Automation
Mute Toggles Enable for Mute Automation
Send LvL Toggles Enable for Send Level Automation
Plug-In Toggles Enable for Plug-In Automation
Transport
Play Starts playhead at current position in Timeline.
Stop Stops playhead at current position in Timeline.
Record Starts Record Mode for playhead
Rewind Move playhead backwards in Timeline.
Fast Forward Moves playhead forward in Timeline.
RTZ Moves playhead to beginning of Timeline.
GTE Moves playhead to end of Timeline.
Pre Roll Enables Count-In
In Sets start point of selection in Timeline.
Out Sets end point of selection in Timeline.
Shift+In Sets drop start point of selection in Timeline.
Shift+Out Sets drop end point of selection in Timeline.
Option+In Goest to start of loop region.
Option+Out Goes to end of loop region.
Loop Play/Loop Rec Toggles Loop mode for loop selection in Timeline.
Quick Punch Toggles Punch mode for selection in Timeline.
Audition Toggles Replace
Ext Trans Toggles Metronome
Counter Mode Select Changes Counter Mode in Counter LCD.
Counter Displays Counter for current session.
Utility
Save Press the Save button to save.
Press Shift + Save button to open the Save As dialog.
Undo Press to undo the last edit.
Shift+Undo Press to redo edit.
Enter Confirm selection
Cancel Cancel selection
Solo Clear Clears all track Solos in project.
Group Buttons
Suspend Toggles group suspend.
Navigation
Bank Left Banks 24 tracks left/Scrolls 1 track left in Nudge mode
Bank Right Banks 24 tracks right/Scrolls 1 track right in Nudge mode
Nudge Toggles Nudge mode On/Off
Up Scrolls to next track in Arrangement.
Down Scrolls to previous track in Arrangement.
Left Scroll to previous track in MIxer.
Right Scroll to next track in Mixer.
Zoom Enables Zoom mode for the cursor keys. Left/Right zooms horizontal for the Arrangement window. Up/Down zooms vertical for the Arrangement window.
DSP Edit Section
Sends Assigns DSP Edit section to Sends Mode for Selected Channel.
Insert/Params Assigns DSP Edit section to Insert mode for Selected Channel.
Assign 1-8 Enables Assign for Send/Insert. Use knobs in DSP Edit section change selection.
Select 1-8 Toggles Pre/Post Mode for Sends. Selects Insert to edit parameters.
Bypass 1-8 Mutes Send. Bypasses Plug-in.
Channel Matrix Section
Goto Enables Marker mode. Use Matrix keys 1-32 to jump to marker position.
In Marker Mode, cursor keys Left/Right navigate between markers, Down creates marker at playhead position.
1/A Use to page forward through plug-in parameters when editing in DSP Editor.
2/B Use to page backwards through plug-in parameters when editing in DSP Editor.
View Displays Screenset 1
Bank A Displays Screenset 2
Bank B Displays Screenset 3
Bank C Displays Screenset 4
Bank D Displays Screenset 5
Window Buttons
Mix Displays Mixer Window
Edit Displays Arrange Window
MemLoc Displays Marker Window
Transport Displays Transport
Status Displays Event Editor
Edit
Copy Copy selected region in Arrange Window
Delete Deletes selected region in Arrange Window
Cut Cuts selected region in Arrange Window
Paste Pastes region in Arrange Window
Modifiers
Shift Enables Shift Modifier.
Option Enables Option Modifier.
Control Enables Control Modifier.
Command Enables Command Modifier.
V-Window Mode
With the V-Window feature, users can instantly control any plug-ins or controls on screen through their control surface's channel strip with a touch of a button.
Master Fader Press once to enable Master Fader control. Press a second time to enable V-Window mode for the 8th channel fader. Press a 3rd time to cycle back to basic channel control.
Mute While in V-Window mode, the Mute button on the last channel strip will cycle through the various V-Window Modes which are listed below:
VButton: Use this mode to interact with button controls. The mouse will stay in its place and activate a button press when the fader is touched.
VButtonSet: Use this mode to create and cycle through different button set points. With the mouse hovering above the on screen button's position press Shift+Solo on the control surface to set a Pin at that location. Using the fader in this mode will cylce between multiple Pins to use with VButton mode.
VWKnob: Use this mode when interacting with knob controls on the plug-ins GUI.
VWHSlider: Use this mode when interacting with horizontal slider controls on the plug-ins GUI.
VWVSlider: Use this mode when interacting with vertically slider controls on the plug-ins GUI.
Solo While in V-Window Mode, pressing the Solo button will pin the mouse location and revert to that location any time the fader is touched. Once the fader is released, the mouse is also returned to that pin position. This way it is very easy to pin a parameter and instantly control it without having to worry with the mouse cursor is on the screen.
Select Use the Select button while in V-Window mode to reset the fader position.
MIDI Mode
MIDI Mode converts the surfaces faders, knobs, and buttons into assignable MIDI Controls that can be mapped in the DAW.
Mon/0 Toggles surface between DAW Mode and MIDI Mode

ProControl - Studio One / Fender Studio

Channel Strips
Record Arms the assigned audio track of the Channel.
Solo Solos the Channel (with Momentary mode).
Mute Mutes the Channel (with Momentary mode).
Auto Cycles through Automation modes on track.
Select Sets the Channel to the Select state.
Knob Changes the assigned parameter.
Knob Button Sets assigned parameter to default value
Track Meters Displays metering for tracks. Currenlty supports one meter per channel.
Bank Mode
The assignment buttons are used to assign controls to the Knobs.
Pan (Default) Shows the track names in the LED strip and assigns Knobs to Channel Pan.
Send A,B,C,D,E Assigns Knob to Sends
First Press - Modify send level of the selected channel.
Additional Presses - Cycle through sends 1-8 to modify sends 1-8 for all tracks.
Input, Output Modify track parameters of the selected Channel.
Bypass all plug-ins.
Monitoring on/off.
Select Channel Input.
Select Channel Output.
Bypass Sends 1-4.
Master Bypass Bypass for Inserts 1-8 of the selected Channel.
Insert/Params Sets the V-Pots to Control Link mode.
Flip Flips knob assignment to faders.
Master Faders Toggles last Channel Fader to be Master Fader
LCD/Display
Counter Displays Counter for current session. Counter mode can be changed in DAW.
Automation
Write Sets Automation to Write mode for the selected Channel.
Touch Sets Automation to Touch mode for the selected Channel.
Latch Sets Automation to Latch mode for the selected Channel.
Read Sets Automation to Read mode for the selected Channel.
Off Sets Automation to Off mode for the selected Channel.
Transport
Play Starts playhead at current position in Timeline.
Stop Stops playhead at current position in Timeline. (Press twice to Return to Zero)
Record Starts Record Mode for playhead
Rewind Move playhead backwards in Timeline.
Fast Forward Moves playhead forward in Timeline.
RTZ Return to Zero.
Loop Play/Loop Rec Toggles Loop mode for loop selection in Timeline.
Quick Punch Toggles Punch mode for selection in Timeline.
Online Enables Marker Mode. Use Rewind to go to previous marker/Use Fast forward to go to next marker.
Soft Keys
Mixer View Buttons
DSP Section- Assign 1 Shows all Studio One Channels.
DSP Section- Assign 2 Shows all available Inputs
DSP Section- Assign 3 Shows all Audio type tracks
DSP Section- Assign 4 Shows all Instrument type tracks
DSP Section- Assign 5 Shows all FX type tracks
DSP Section- Assign 6 Shows all Bus type tracks
DSP Section- Assign 7 Shows all available Outputs
DSP Section- Assign 8 Shows all Remote User tracks
Function keys (Keys are predefined but can be modified with Mackie Control Device editor)
Matrix Button 1 Show Inputs
Matrix Button 2 Show Track
Matrix Button 3/Mix Window Button Show Mix Console
Matrix Button 4 Open Channel
Matrix Button 5 Add Insert
Matrix Button 6 Add Send
Matrix Button 7/Plug-in Window Button Show Inserts Window
Matrix Button 8 Toggle Floating Window
Navigation
Bank Left Banks tracks left/Scrolls 1 track left in Nudge mode
Bank Right Banks tracks right/Scrolls 1 track right in Nudge mode
Nudge Toggles Nudge mode On/Off
The cursor buttons operate in several modes.
Zoom Horizontal and vertical zoom when zoom button is enabled.
Up Moves up track selection or list/Zooms out vertically
Down Moves down track selection or list/Zooms in vertically
Left Moves up track selection or list/Zooms out horizontally
Right Moves down track selection or list/Zooms in horizontally
Utility
Save Press the Save button to save.
Press Shift + Save button to open the Save As dialog.
Undo Press to undo the last edit.
Enter Confirm selection
Cancel Cancel selection
V-Window Mode
With the V-Window feature, users can instantly control any plug-ins or controls on screen through their control surface's channel strip with a touch of a button.
Master Fader Press once to enable Master Fader control. Press a second time to enable V-Window mode for the 8th channel fader. Press a 3rd time to cycle back to basic channel control.
Mute While in V-Window mode, the Mute button on the last channel strip will cycle through the various V-Window Modes which are listed below:
VButton: Use this mode to interact with button controls. The mouse will stay in its place and activate a button press when the fader is touched.
VButtonSet: Use this mode to create and cycle through different button set points. With the mouse hovering above the on screen button's position press Shift+Solo on the control surface to set a Pin at that location. Using the fader in this mode will cylce between multiple Pins to use with VButton mode.
VWKnob: Use this mode when interacting with knob controls on the plug-ins GUI.
VWHSlider: Use this mode when interacting with horizontal slider controls on the plug-ins GUI.
VWVSlider: Use this mode when interacting with vertically slider controls on the plug-ins GUI.
Solo While in V-Window Mode, pressing the Solo button will pin the mouse location and revert to that location any time the fader is touched. Once the fader is released, the mouse is also returned to that pin position. This way it is very easy to pin a parameter and instantly control it without having to worry with the mouse cursor is on the screen.
Select Use the Select button while in V-Window mode to reset the fader position.
MIDI Mode
MIDI Mode converts the surfaces faders, knobs, and buttons into assignable MIDI Controls that can be mapped in the DAW.
Mon/0 Toggles surface between DAW Mode and MIDI Mode

ProControl - Cubase/Nuendo

Channel Strips
EQ Assigns EQ editor for selected channel across channel knobs. Use Channel Bar Scroll buttons to access additional parameters.
Insert Assigns Plug-in Editor for selected channel across channel knobs. Use Channel Bar Scroll buttons to access plug-in parameters.
Send Assigns Sends for selected channel across channel knobs.
Record Arms the assigned audio track of the Channel.
Solo Solos the Channel.
Mute Mutes the Channel.
Auto Cycles through Read/Write Mode on track
Select Sets the Channel to the Select state.
Knob Changes the assigned parameter.
Knob Button
Track Meters Displays Stereo metering for tracks.
Bank Mode
The assignment buttons are used to assign controls to the Knobs.
Pan (Default) Shows pan position in LED Strip. Knob controls pan position.
Send A Assigns Send 1 to knobs. Assigns Send 6 to knobs when pressed twice. Use Channel Bar Scroll Left and Right to switch parameters.
Send B Assigns Send 2 to knobs. Assigns Send 7 to knobs when pressed twice. Use Channel Bar Scroll Left and Right to switch parameters.
Send C Assigns Send 3 to knobs. Assigns Send 8 to knobs when pressed twice. Use Channel Bar Scroll Left and Right to switch parameters.
Send D Assigns Send 4 to knobs. Use Channel Bar Scroll Left and Right to switch parameters.
Send E Assigns Send 5 to knobs. Use Channel Bar Scroll Left and Right to switch parameters.
Send parameters 1st parameter is Send level.
2nd parameter is bypass for Send assignment.
3rd parameter is Pre/Post.
4th parameter is pan for send.
5th parameter is Send assignment.
6th parameter is Master send bypass for channel.
Input, Output Assign channel parameters to knobs. Use Channel bar scroll Left and Right to cycle through parameters.
Channel Parameters 1st parameter is channel output.
2nd parameter is input monitoring on channel.
3rd parameter is channel input.
4th parameter is pre-gain.
5th parameter is phase invert.
Flip Flips knobs to faders.
Master Faders Enables Master Fader control on the 8th channel of ProControl.
Output Meters Displays the Master Meter.
Automation
Write Toggles Write automation for all channels.
Touch Sets Automation to Touch automation for all channels. When in Touch mode, pressing again enables Cross-over automation mode.
Latch Sets Automation to Latch mode for all channels. When in Latch mode, pressing again enables Cross-over automation mode.
Read Toggles Read automation for all channels.
Auto Suspend Suspends Automation
There is no indication if Automation enables are On/Off
Vol Toggle Enable Volume Automation
Pan Toggle Enable Pan Automation
Mute Toggle Enable Mute Automation
Sends Toggle Enable Sends Automation
EQ Toggle Enable Send Mute Automation
Plugin Toggle Enable Plugin Automation
Transport
Play Starts playhead at current position in Timeline.
Stop Stops playhead at current position in Timeline.
Record Starts Record Mode for playhead
Rewind Move playhead backwards in Timeline.
Fast Forward Moves playhead forward in Timeline.
RTZ Returns playhead to beginning of Timeline.
GTE Sends playhead to end of Timeline.
Pre Roll Enables Pre Roll
Post Roll Enables Post Roll
Mark In Sets start point of selection in Timeline.
Mark Out Sets end point of selection in Timeline.
Loop Play/Loop Rec Toggles Loop mode for loop selection in Timeline.
Quick Punch Toggles Punch mode for selection in Timeline.
Counter Displays Counter for current session. Counter mode can be changed in DAW.
Edit
Copy Copy Selected Region
Cut Cut Selected Region
Delete Delete Selected Region
Capture Duplicate Selected Region
Separate Separate Region at Playhead
Paste Paste Region
Utility
Save Save the current session.
Undo Undo the last action.
Shift+Undo Redo the last action.
ProControl Matrix Buttons
The Channel Matrix provides functions with the channels depending on which mode is selected.
1-32 Use for channel select/mute/solo/record enable when in the selected mode. Acts as softkeys when set to softkey mode.
A Selects bank 1 of channels for channel matrix
B Selects bank 2 of channels for channel matrix
C Selects bank 3 of channels for channel matrix
D Selects bank 4 of channels for channel matrix
Select Assigns matrix to be select for channels.
Mute Assigns matrix to be mute enable for channels.
Solo Assigns matrix to be solo enable for channels.
Rec/Rdy Assigns matrix to be record enable for channels.
Snapshot Assigns matrix to be softkeys. Customize softkeys in Steinberg Control surface setup window.
Go To Enables Marker Mode. Use Wheel or Left/Right cursor keys to navigate between markers. Down cursor key creates marker at playhead.
Window Buttons
Mix Opens MixConsole Window
WinCfg Opens Status Window
Memloc Opens Memory Locator Window
Navigation
Bank Left Banks tracks left/Scrolls 1 track left in Nudge mode
Bank Right Banks tracks right/Scrolls 1 track right in Nudge mode
Nudge Toggles Nudge mode On/Off
There are several different modes available for the cursor keys and wheel.
Scrub Enables Scrub mode for the wheel.
Shuttle Enables Shuttle Mode for the wheel.
Zoom Enables Zoom mode for the wheel and cursor keys.
Zoom+Shift Enables Track Zoom for the wheel and cursor keys. Track zoom increases/decreases track height.
Zoom+Option Enables Wave Zoom for the wheel and cursor keys. Wave zoom increases waveform view in region.
Zoom+Control Enables Nudge trim mode for the wheel and cursor keys. Use Left/Right cursor keys to change between start/end of region. Use Up/Down cursor keys or wheel to trim.
Function Buttons
F1 Toggles Banking mode follow for Bank and Scroll buttons.
When Follow mode is on, Mixer in Cubase moves to match what is shown on Control surface. (Must have track count in Cubase view match control surface layout.)
F2 Toggles Fine knob mode.
V-Window Mode
With the V-Window feature, users can instantly control any plug-ins or controls on screen through their control surface's channel strip with a touch of a button.
Master Fader Press once to enable Master Fader control. Press a second time to enable V-Window mode for the 8th channel fader. Press a 3rd time to cycle back to basic channel control.
Mute While in V-Window mode, the Mute button on the last channel strip will cycle through the various V-Window Modes which are listed below:
VButton: Use this mode to interact with button controls. The mouse will stay in its place and activate a button press when the fader is touched.
VButtonSet: Use this mode to create and cycle through different button set points. With the mouse hovering above the on screen button's position press Shift+Solo on the control surface to set a Pin at that location. Using the fader in this mode will cylce between multiple Pins to use with VButton mode.
VWKnob: Use this mode when interacting with knob controls on the plug-ins GUI.
VWHSlider: Use this mode when interacting with horizontal slider controls on the plug-ins GUI.
VWVSlider: Use this mode when interacting with vertically slider controls on the plug-ins GUI.
Solo While in V-Window Mode, pressing the Solo button will pin the mouse location and revert to that location any time the fader is touched. Once the fader is released, the mouse is also returned to that pin position. This way it is very easy to pin a parameter and instantly control it without having to worry with the mouse cursor is on the screen.
Select Use the Select button while in V-Window mode to reset the fader position.
MIDI Mode
MIDI Mode converts the surfaces faders, knobs, and buttons into assignable MIDI Controls that can be mapped in the DAW.
Mon/0 Toggles surface between DAW Mode and MIDI Mode

ProControl - MixBus

Channel Strips
Record Arms the assigned audio track of the Channel.
Solo Solos the Channel
Mute Mutes the Channel
Select Sets the Channel to the Select state.
EQ Assigns EQ editor to knobs for the selected track.
DYN Assigns DYN editor to knobs for the selected track.
In/Sends Assigns Sends to knobs for the selected track.
Knob Changes the assigned parameter.
Knob Button Sets assigned parameter to default value
When in Plug-In Mode, selects plug-in to edit.
Track Meters Displays metering for tracks. Currenlty supports one meter per channel.
Bank Mode
The assignment buttons are used to assign controls to the Knobs.
Pan (Default) Shows the track names in the LED strip and assigns Knobs to Channel Pan.
Send A,B,C,D,E Assigns Knobs to Sends for selected track.
Use the knob button to toggle the send off/on
Input, Output Assigns track parameters to the knobs for the selected track.
Trim gain, Monitor Mode, Solo Isolate, Solo Safe, and Phase are available to edit in this mode.
Flip Flips knob assignment to faders.
Master Faders Toggles last Channel Fader to be Master Fader
Transport
Play Starts playhead at current position in Timeline.
Stop Stops playhead at current position in Timeline. (Press twice to Return to Zero)
Record Starts Record Mode for playhead
Rewind Move playhead backwards in Timeline.
Fast Forward Moves playhead forward in Timeline.
RTZ Go to Start of Session.
GTE Go to End of Session.
Loop Play Start Looped Playback.
Loop Rec Punch In
Punch Punch Out
In Mark In
Out Mark Out
Audition Sets Loop from selection
Pre Roll Sets Punch from selection
Post Roll Sets Session Start/End from selection
Ext Trans Toggles Click
Counter Mode Select Toggles Counter Display
Counter Displays Counter for current session. Counter mode can be changed in DAW.
Automation
The automation buttons control automation for the selected track
Read Enables Play Automation for the selected track.
Write Enables Write Automation for the selected track.
Touch Enables Touch Automation for the selected track.
Off Enables Off/Manual Automation for the selected track.
DSP Edit Buttons
The DSP Edit buttons change which tracks are in view.
Assign 1 Shows only MIDI tracks. Press again to return to default Mixer view.
Assign 2 Shows only Audio tracks. Press again to return to default Mixer view.
Assign 3 Shows only Busses. Press again to return to default Mixer view.
Assign 4 Shows only Aux tracks. Press again to return to default Mixer view.
Assign 5 Shows user selected tracks. Press again to return to default Mixer view.
Navigation
Bank Left Banks tracks left/Scrolls 1 track left in Nudge mode
Bank Right Banks tracks right/Scrolls 1 track right in Nudge mode
Nudge Toggles Nudge mode On/Off
The cursor buttons operate in several modes.
Zoom Press once to enable Zoom Mode
Press twice to enable Navigation Mode.
Press three times to return to normal mode.
Up Zooms in Vertically when zoom mode is active.
Deletes marker at playhead when Navigation mode is active.
Down Zooms out Vertically when zoom mode is active.
Creates Marker at playhead when Navigation mode is active.
Left Zooms out Horizontally when zoom mode is active.
Moves to Previous marker when Navigation mode is active.
Right Zooms in Horizontally when zoom mode is active.
Moves to Next Marker when Navigation mode is active.
Utility
Undo Press to undo the last edit.
Shift+Undo Press to redo edit.
Save Saves Session
Enter Acts as Enter key.
Escape Acts as ESC key.
F3 Select All Tracks.
F4 Deselect All Tracks.
Matrix Buttons
Use the Function Keys editor in the MixBus Mackie Control Protocol Settings Window to assign commands
Go To Enables Marker Mode for the cursor arrows.
Matrix Button 1 F1
Matrix Button 2 F2
Matrix Button 3 F3
Matrix Button 4 F4
Matrix Button 5 F5
Matrix Button 6 F6
Matrix Button 7 F7
Matrix Button 8 F8
V-Window Mode
With the V-Window feature, users can instantly control any plug-ins or controls on screen through their control surface's channel strip with a touch of a button.
Master Fader Press once to enable Master Fader control. Press a second time to enable V-Window mode for the 8th channel fader. Press a 3rd time to cycle back to basic channel control.
Mute While in V-Window mode, the Mute button on the last channel strip will cycle through the various V-Window Modes which are listed below:
VButton: Use this mode to interact with button controls. The mouse will stay in its place and activate a button press when the fader is touched.
VButtonSet: Use this mode to create and cycle through different button set points. With the mouse hovering above the on screen button's position press Shift+Solo on the control surface to set a Pin at that location. Using the fader in this mode will cylce between multiple Pins to use with VButton mode.
VWKnob: Use this mode when interacting with knob controls on the plug-ins GUI.
VWHSlider: Use this mode when interacting with horizontal slider controls on the plug-ins GUI.
VWVSlider: Use this mode when interacting with vertically slider controls on the plug-ins GUI.
Solo While in V-Window Mode, pressing the Solo button will pin the mouse location and revert to that location any time the fader is touched. Once the fader is released, the mouse is also returned to that pin position. This way it is very easy to pin a parameter and instantly control it without having to worry with the mouse cursor is on the screen.
Select Use the Select button while in V-Window mode to reset the fader position.
MIDI Mode
MIDI Mode converts the surfaces faders, knobs, and buttons into assignable MIDI Controls that can be mapped in the DAW.
Mon/0 Toggles surface between DAW Mode and MIDI Mode

ProControl - Performer

Channel Strips
Record Arms the assigned audio track of the Channel.
Solo Solos the Channel.
Mute Mutes the Channel.
Select Sets the Channel to the Select state.
Knob Changes the assigned parameter.
Knob Button Sets assigned parameter to default value
In Insert Mode the Knob button will toggle bypass on the plug-in.
Track Meters Displays metering for tracks. Currenlty supports one meter per channel.
Bank Mode
The assignment buttons are used to assign controls to the Knobs.
Pan (Default) Shows the track names in the LED strip and assigns Knobs to Channel Pan.
Send A,B,C,D,E Assigns Knob to Sends
When Bank assignment is set to Sends. Up/Down cycle through send slots.
Input, Output Opens bank assignment options. Use the knob buttons to select assignment for knobs.
Ins/Byp Assigns Insert mode for the knobs. Use the knobs to select plug-in to insert on channel.
When Bank assignment is set to inserts. Up/Down cursor keys cycle through insert slots.
In/Edit While in Insert Mode, hold down the In/Edit button and press the knob button on the
Default Hold down and use the knob to cycle through presets for the selected plug-in.
Flip Flips knob assignment to faders.
Master Faders Toggles last Channel Fader to be Master Fader
Automation
To Assign automation to a channel. Hold down the automation button and press the Channel button you wish to assign automation to.
Must be in Pan or Send Assignment mode for Automation Assignment to Work.
Write Sets Automation to Write mode for the selected Channel.
Touch Sets Automation to Touch mode for the selected Channel.
Latch Sets Automation to Latch mode for the selected Channel.
Read Sets Automation to Read mode for the selected Channel.
Trim Sets Automation to Trim Touch mode for selected Channel.
Transport
Play Starts playhead at current position in Timeline.
Stop Stops playhead at current position in Timeline. (Press twice to Return to Zero)
Record Starts Record Mode for playhead
Rewind Move playhead backwards in Timeline.
Fast Forward Moves playhead forward in Timeline.
Audition Toggles Metronome
In Set Left
Out Set Right
Quick Punch Set Left Drop
Counter Displays Counter for current session. Counter mode can be changed in DAW.
Navigation
Bank Left Banks tracks left/Scrolls 1 track left in Nudge mode
Bank Right Banks tracks right/Scrolls 1 track right in Nudge mode
Nudge Toggles Nudge mode On/Off
The cursor buttons operate in several modes.
Zoom Horizontal and vertical zoom when zoom button is enabled.
Up Moves up track selection or list/Zooms out vertically
When Bank assignment is set to inserts. Up cursor key cycle through insert slots.
When Bank assignment is set to sends. Up cursor key cycle through send slots.
Down Moves down track selection or list/Zooms in vertically
When Bank assignment is set to inserts. Down cursor key cycle through insert slots.
When Bank assignment is set to sends. Down cursor key cycle through insert slots.
Left Moves up track selection or list/Zooms out horizontally
Right Moves down track selection or list/Zooms in horizontally
Utility
Save Press the Save button to save.
Press Shift + Save button to open the Save As dialog.
Undo Press to undo the last edit.
Enter Confirm selection
Cancel Cancel selection
V-Window Mode
With the V-Window feature, users can instantly control any plug-ins or controls on screen through their control surface's channel strip with a touch of a button.
Master Fader Press once to enable Master Fader control. Press a second time to enable V-Window mode for the 8th channel fader. Press a 3rd time to cycle back to basic channel control.
Mute While in V-Window mode, the Mute button on the last channel strip will cycle through the various V-Window Modes which are listed below:
VButton: Use this mode to interact with button controls. The mouse will stay in its place and activate a button press when the fader is touched.
VButtonSet: Use this mode to create and cycle through different button set points. With the mouse hovering above the on screen button's position press Shift+Solo on the control surface to set a Pin at that location. Using the fader in this mode will cylce between multiple Pins to use with VButton mode.
VWKnob: Use this mode when interacting with knob controls on the plug-ins GUI.
VWHSlider: Use this mode when interacting with horizontal slider controls on the plug-ins GUI.
VWVSlider: Use this mode when interacting with vertically slider controls on the plug-ins GUI.
Solo While in V-Window Mode, pressing the Solo button will pin the mouse location and revert to that location any time the fader is touched. Once the fader is released, the mouse is also returned to that pin position. This way it is very easy to pin a parameter and instantly control it without having to worry with the mouse cursor is on the screen.
Select Use the Select button while in V-Window mode to reset the fader position.
MIDI Mode
MIDI Mode converts the surfaces faders, knobs, and buttons into assignable MIDI Controls that can be mapped in the DAW.
Mon/0 Toggles surface between DAW Mode and MIDI Mode

ProControl - Ableton Live

Channel Strips
Record Arms the assigned audio track of the Channel.
Solo Solos the Channel
Mute Mutes the Channel
Select Sets the Channel to the Select state.
Knob Changes the assigned parameter.
Knob Button Sets assigned parameter to default value
When in Plug-In Mode, selects plug-in to edit.
Bank Mode
The assignment buttons are used to assign controls to the Knobs.
Pan (Default) Shows the track names in the LED strip and assigns Knobs to Channel Pan.
Send A,B,C,D,E Assigns Knob to Sends
Modify send levels of the selected channel.
Input, Output Modify IO parameters of channels
Press multiple times to cycle through input and output parameters
Insert/Params Sets the V-Pots to PlugIn Edit mode.
Track Meters Displays metering for tracks. Currenlty supports one meter per channel.
Flip Flips knob assignment to faders.
Master Faders Toggles last Channel Fader to be Master Fader
Transport
Play Starts playhead at current position in Timeline.
Stop Stops playhead at current position in Timeline. (Press twice to Return to Zero)
Record Starts Record Mode for playhead
Rewind Move playhead backwards in Timeline.
Fast Forward Moves playhead forward in Timeline.
Loop Play/Loop Rec Toggles Loop mode for loop selection in Timeline.
In Toggles Punch In for Arrangement
Out Toggles Punch Out for Arrangement
Counter Mode Select Toggles Counter Display
Counter Displays Counter for current session. Counter mode can be changed in DAW.
Trigger Buttons
Assign Triggers selected Scene to play.
Capture Triggers selected Scene to play.
Separate Triggers selected Clip to Play.
Send Mute Stops all clips.
Delete Triggers Back to Arrangement when in clip play.
Navigation
Bank Left Banks tracks left/Scrolls 1 track left in Nudge mode
Bank Right Banks tracks right/Scrolls 1 track right in Nudge mode
Nudge Toggles Nudge mode On/Off
The cursor buttons operate in several modes.
Zoom First press switches to Zoom mode. Second press switches to Marker mode. Third press returns to normal mode.
Up Moves Up Selection in Session/Arrangment View.
Down Moves Down Selection in Session/Arrangement View.
Creates Marker in Arrangement at Playhead.
Left Moves Left Selection in Session View.
Zooms Out in Arrangement View
Moves to Previous Marker in Arrangement.
Right Moves Right Selection in Session View.
Zooms In in Arrangement View
Moves to Next Marker in Arrangement.
Wheel
There are two modes to use with the wheel
Scrub Changes the Wheel to Scene mode. Wheel moves up and down the scenes in Session view.
Shuttle Changes the Wheel to Navigation mode. Wheel moves playhead forward and back through timeline.
Utility
Undo Press to undo the last edit.
Shift+Undo Press to redo edit.
Pencil Tool Toggles Draw
Grab Tool Toggles Follow
Soft Keys
Use the Ableton Live MIDI mapping mode to map keys to functions.
Matrix Button 1 Maps F#2 key
Matrix Button 2 Maps G2 key
Matrix Button 3 Maps G#2 key
Matrix Button 4 Maps A2 key
Matrix Button 5 Maps A#2 key
Matrix Button 6 Maps B2 key
Matrix Button 7 Maps C3 key
Matrix Button 8 Maps C#3 key
Matrix Button 9 Maps D3 key
Matrix Button 10 Maps D#3 key
Matrix Button 11 Maps E3 key
Matrix Button 12 Maps F3 key
Matrix Button 13 Maps F#3 key
Matrix Button 14 Maps G3 key
Matrix Button 15 Maps G#3 key
Matrix Button 16 Maps A3 key
V-Window Mode
With the V-Window feature, users can instantly control any plug-ins or controls on screen through their control surface's channel strip with a touch of a button.
Master Fader Press once to enable Master Fader control. Press a second time to enable V-Window mode for the 8th channel fader. Press a 3rd time to cycle back to basic channel control.
Mute While in V-Window mode, the Mute button on the last channel strip will cycle through the various V-Window Modes which are listed below:
VButton: Use this mode to interact with button controls. The mouse will stay in its place and activate a button press when the fader is touched.
VButtonSet: Use this mode to create and cycle through different button set points. With the mouse hovering above the on screen button's position press Shift+Solo on the control surface to set a Pin at that location. Using the fader in this mode will cylce between multiple Pins to use with VButton mode.
VWKnob: Use this mode when interacting with knob controls on the plug-ins GUI.
VWHSlider: Use this mode when interacting with horizontal slider controls on the plug-ins GUI.
VWVSlider: Use this mode when interacting with vertically slider controls on the plug-ins GUI.
Solo While in V-Window Mode, pressing the Solo button will pin the mouse location and revert to that location any time the fader is touched. Once the fader is released, the mouse is also returned to that pin position. This way it is very easy to pin a parameter and instantly control it without having to worry with the mouse cursor is on the screen.
Select Use the Select button while in V-Window mode to reset the fader position.
MIDI Mode
MIDI Mode converts the surfaces faders, knobs, and buttons into assignable MIDI Controls that can be mapped in the DAW.
Mon/0 Toggles surface between DAW Mode and MIDI Mode

ProControl - LUNA

Channel Strips
Record Arms the assigned audio track of the Channel.
Insert Assigns plug-in mode to knobs.
EQ (Hold)+Knob Button Single Cue V-Pot mode. Press and hold the EQ button on a channel strip and then press the specified knob button to display that Cue across all V-pots.
Solo Solos the Channel (with Momentary mode).
Mute Mutes the Channel (with Momentary mode).
Select Sets the Channel to the Select state.
Knob Changes the assigned parameter.
Knob Button Sets assigned parameter to default value
Solo Clear When lit, pressing clears all active solos.
Track Meters Displays metering for tracks. Currenlty supports one meter per channel.
Bank Mode
There are two ways to use the Send Mode button to assign Sends to the knobs.
Send A (Hold)+Knob Button Single Sends V-Pot mode. Press and hold the Send A button and then press the specified knob button to display that Send across all V-pots.
Send A Expanded Sends V-Pot mode. Press Send A to cycle through Send overview and detail pages, which allow control over the selected track's parameters.
Pan Assigns pan position to knobs
Flip Flips V-Pot control to Faders.
Master Faders Press first time to toggle Master fader to be assigned to last fader on controller. Master Fader light will be solid in this mode.
Press second time to enable V-Window feature for last fader on controller. Master Fader Light will be flashing in this mode.
Automation
Touch Sets Automation to Touch mode for the selected Channel.
Read Sets Automation to Read mode for the selected Channel.
Trim Toggles Trim Mode for the selected Channel.
Transport
Play Starts playhead at current position in Timeline.
Stop Stops playhead at current position in Timeline. (Press twice to Return to Zero)
Record Starts Record Mode for playhead
Rewind Move playhead backwards in Timeline.
Fast Forward Moves playhead forward in Timeline.
RTZ Moves playhead to start of timeline
GTE Moves playhead to end of timeline
Counter Displays Counter for current session. Counter mode can be changed in DAW.
Navigation
Bank Left Banks tracks left/Scrolls 1 track left in Nudge mode
Bank Right Banks tracks right/Scrolls 1 track right in Nudge mode
Nudge Toggles Nudge mode On/Off
Zoom Horizontal and vertical zoom when zoom button is enabled.
Up Moves up track selection or list/Zooms out vertically
Down Moves down track selection or list/Zooms in vertically
Left Moves to previous marker/Zooms out horizontally
Right Moves to next marker/Zooms in horizontally
Utility
Save Press the Save button to save.
Press Shift + Save button to open the Save As dialog.
Undo Press to undo the last edit.
Enter Confirm selection
Cancel Cancel selection
V-Window Mode
With the V-Window feature, users can instantly control any plug-ins or controls on screen through their control surface's channel strip with a touch of a button.
Master Fader Press once to enable Master Fader control. Press a second time to enable V-Window mode for the 8th channel fader. Press a 3rd time to cycle back to basic channel control.
Mute While in V-Window mode, the Mute button on the last channel strip will cycle through the various V-Window Modes which are listed below:
VButton: Use this mode to interact with button controls. The mouse will stay in its place and activate a button press when the fader is touched.
VButtonSet: Use this mode to create and cycle through different button set points. With the mouse hovering above the on screen button's position press Shift+Solo on the control surface to set a Pin at that location. Using the fader in this mode will cylce between multiple Pins to use with VButton mode.
VWKnob: Use this mode when interacting with knob controls on the plug-ins GUI.
VWHSlider: Use this mode when interacting with horizontal slider controls on the plug-ins GUI.
VWVSlider: Use this mode when interacting with vertically slider controls on the plug-ins GUI.
Solo While in V-Window Mode, pressing the Solo button will pin the mouse location and revert to that location any time the fader is touched. Once the fader is released, the mouse is also returned to that pin position. This way it is very easy to pin a parameter and instantly control it without having to worry with the mouse cursor is on the screen.
Select Use the Select button while in V-Window mode to reset the fader position.
MIDI Mode
MIDI Mode converts the surfaces faders, knobs, and buttons into assignable MIDI Controls that can be mapped in the DAW.
Mon/0 Toggles surface between DAW Mode and MIDI Mode

Faderport 8/16 - Pro Tools 2023+

Bank Mode
Track (Default) Fader controls track volume. Pan/Param controls track pan.
Press Track to toggle to Track Browser
Shift+ Press Shift + Track to toggle time display
Push Pan/Param to toggle between Pan Left & Pan Right control
Pan Fader controls track pan
Press Pan to toggle between Pan Left & Pan Right control
Sends Coming soon
Track Mode
Fader Adjust track volume
Select Displays track color. Press to focus channel. Press for next insert A-J.
Mute Mute controls track mute
Solo Solo controls track solo
Display 7-Character track name. Highlighted for focus channel.
Volume (dB)
Pan/Param Mode - 'Pan', 'Pan L', 'Pan R', or none
Bar Graph - Pan position
Track Browser Mode
Select Displays track color for browser row. Press to auto bank and focus.
Display Six rows of 7-Character track names. Highlighted for browser row.
Pan Mode
Fader Adjust track pan
Select Displays track color. Press to focus channel. Press for next insert A-J.
Mute Mute controls track mute
Solo Solo controls track solo
Display 7-Character track name. Highlighted for focus channel.
Volume (dB)
Pan Mode - Pan, Pan L, Pan R, or none
Bar Graph - Pan position
Sends Mode
Coming Soon
Marker Mode
Marker Toggle Marker Mode on/off
Display Six rows of 7-Character location names. Highlighted for browser row.
Select Press to select browsed memory location.
Selected memory location becomes home location for Hot Locations.
Wheel Turn to browse rows of memory locations
Push to create a new memory location
Hot Locations User programmable memory locations.
Audio Press to select AUDIO location. De-select for home location.
VI Press to select VI location. De-select for home location.
Bus Press to select BUS location. De-select for home location.
VCA Press to select VCA location. De-select for home location.
All Press to select ALL location. De-select for home location.
Audio Shift+ Press to select INPUTS location. De-select for home location.
VI Shift+ Press to select MIDI location. De-select for home location.
Bus Shift+ Press to select OUTPUTS location. De-select for home location.
VCA Shift+ Press to select FX location. De-select for home location.
All Shift+ Press to select USER location. De-select for home location.
Bank Mode Bank button to select
Left Arrow Bank left by 8 / 16 tracks
Right Arrow Bank right by 8 / 16 tracks
Wheel Scroll left/right by 1 track
Channel Mode Channel button to select
Left Arrow Scroll left by 1 track
Right Arrow Scroll right by 1 track
Wheel Scroll left/right by 1 track
Channel Mode Channel button to select
Left Arrow Scroll left by 1 track
Right Arrow Scroll right by 1 track
Wheel Scroll left/right by 1 track
Marker Mode Marker button to select
Display Six rows of 7-Character location names. Highlighted for browser row.
Select Press to select browsed memory location.
Selected memory location becomes home location for Hot Locations.
Wheel Turn to browse rows of memory locations
Push to create a new memory location
Marker Return to previous mode

Coming Soon

FaderPort V2 - Pro Tools

Channel Strip
Solo Solos the Channel.
Mute Mutes the Channel.
Arm Arms the assigned audio track of the Channel.
Bypass Flips knob assignment to be controlled by the fader.
Arm Shift+ Toggles record arm for all tracks.
Knob Changes the assigned parameter.
Knob Press Toggles between Left and Right stereo panners when in Pan mode.
Toggles Pre/Post Fader when in Sends mode.
Knob Button Shift+ Resets Pan Position to Center.
Fader Touch Shift+ Resets Fader position to 0.
Prev Navigates to the previous track.
Next Navigates to the next track.
Automation
Hold down Auto button channel strip to select automation modes.
Touch Enables Touch Mode Automation for the selected Channel.
Touch Shift+ Enables Latch Mode Automation for the selected Channel.
Write Enables Write Mode Automation for the selected Channel.
Write Shift+ Toggles Trim Mode Automation for the selected Channel.
Read Enables Automation selection. Hold down button to make selection using 2 different methods.
Read Shift+ Enables Off Mode Automation for the selected Channel.
Bank Mode With Fader Flip
The assignment buttons are used to assign controls to the Knobs.
Pan (Default) Assigns knobs to control pan position. For stereo tracks, press pan button again to access other side.
Master Assigns Send A to knob.
Click Assigns Send B to knob.
Section Assigns Send C to knob.
Section Shift+ Assigns Send D to knob.
Bypass Flip knob control to fader.
Fast Focus and Refocus
With V-Control Pro, the FaderPort automatically focuses to any track you select. V-Control Pro can widen the bank up to thirty-two tracks for instant focus, and if it loses focus it immediately blinks the Channel button. Simply tap the blinking button to automatically ReFocus. Now you can select any track at any time for a focused FaderPort.
Channel When selecting a track outside of the controlled banks, the Channel button will immediately blink on the FaderPort. Press it to ReFocus to that track for control.
When a track is selected within the controlled banks, press the channel button to enable the wheel for navigation.
Transport
Play Starts playhead at current position in Timeline.
Stop Stops playhead at current position in Timeline.
Record Starts Record Mode for playhead
Rewind Move playhead backwards in Timeline.
Rewind Shift+ RTZ
Fast Forward Moves playhead forward in Timeline.
Fast Forward Shift+ GTE
Loop Play Enables Loop playback.
Loop Play Control+ Cycle through Record Modes.
Scroll Pressing one time will enable the knob for Scrub Mode. The Scroll button will be lit up solid in this mode.
Pressing Scroll two times will enable the knob for Shuttle Mode. The Scroll button will blinking in this mode.
Utility
Prev Shift+ Undo the last action.
Next Shift+ Redo the last action.
Master Shift+ Toggles between Mix/Edit window.
Dialog Buttons
Prev Press to Cancel the dialog.
Next Press to OK the dialog.
V-Window Mode
Link Press Link to enable V-Window mode. V-Window mode is compatible with plug-in parameters that are adjustable by clicking and moving the mouse up or down.

Command 8 - Pro Tools

Channel Strips
Solo Solo track
Mute Pan Mode - Mute track
Send A-E Mode - Mute track
Flip Send A-E Mode - Mute send for track
Select Pan Mode - Select track
Send A-E Mode - Pre/post send mode for track
Record Mode - Pre/post record enable for track
Insert Channel Mode - Select track to edit inserts
Insert Select Mode - Select 1-4 to select Insert A-E
Insert Edit Mode - Select 1-4 to toggle Params 1-4
Knob Pan/PanR Mode - Pan for mono/stereo tracks
Send A-E Mode - Send level
Flip Send A-E Mode - Send pan
Insert Edit Mode - Adjust Params 1-4
Fader Pan, Record, Send A-E Mode - Track volume
Flip Send A-E Mode - Send level
Track Meters Displays Stereo metering for tracks.
Bank Modes
Assign controls to the Knobs and Select buttons.
Pan / PanR Assigns knobs to control pan position. For stereo tracks, press pan button again to access other side.
Send A-E Send mode for all tracks.
Record Record mode for all tracks.
Flip Flips Send A-E send level to faders.
Insert (top) Insert Channel Mode, Insert Select Mode, Insert Edit Mode
Transport
Play Starts playhead at current position in Timeline.
Stop Stops playhead at current position in Timeline.
Record Starts Record Mode for playhead
Rewind Move playhead backwards in Timeline.
Fast Forward Moves playhead forward in Timeline.
RTZ Returns playhead to beginning of Timeline.
GTE Sends playhead to end of Timeline.
Loop Play Enables Loop playback.
Loop Record Enables Loop Record.
Quick Punch Enables Punch Mode.
Counter Displays Counter for current session. Counter mode can be changed in DAW.
Display Buttons
Dyn No function at this time
EQ No function at this time
Insert Insert Bank Modes
Pan/Sen/Pre No function at this time
Page L/R Insert Select Mode - Inserts A-D, E
Insert Edit Mode - Params Page
Master Bypass Plug-in Bypass for selected insert
Esc Cancel Pro Tools dialog
Memory Locations
Mem Loc Press to create new location. Press again to confirm.
Esc Press to cancel.
Enter Press to confirm new location
Utility
Undo Press to undo the last edit.
Redo Press to undo the last edit.
Esc Cancel selection
Enter Enter / OK
Windows Buttons
Mix Displays Mixer Window.
Edit Displays Edit Window.
Plug-In Displays Plug-In Window.
Modifiers
Shift Enables Shift Modifier.
Option Enables Option Modifier.
Control Enables Control Modifier. When held down, enables fine knob mode.
Command Enables Command Modifier.
Navigation
Nudge Sets Left and Right cursors to scroll tracks left and right for channel mixer.
Bank Sets Left and Right cursors to bank tracks left and right for channel mixer.
Zoom Enables Zoom mode for the cursor keys. Left/Right zooms horizontal for the Edit window. Up/Down zooms vertical for the Edit window.
Up Scrolls Up in Edit Window.
Down Scrolls Down in Edit Window.
Left Scrolls Left in Edit Window.
Right Scrolls Right in Edit Window.
V-Window Mode
With the V-Window feature, users can instantly control any plug-ins or controls on screen through their control surface's channel strip with a touch of a button.
Master Fader Press once to enable V-Window mode for the 8th channel fader. Press a 2nd time to cycle back to basic channel control.
Mute While in V-Window mode, the Mute button on the last channel strip will cycle through the various V-Window Modes which are listed below:
VButton: Use this mode to interact with button controls. The mouse will stay in its place and activate a button press when the fader is touched.
VButtonSet: Use this mode to create and cycle through different button set points. With the mouse hovering above the on screen button's position press Shift+Solo on the control surface to set a Pin at that location. Using the fader in this mode will cylce between multiple Pins to use with VButton mode.
VWKnob: Use this mode when interacting with knob controls on the plug-ins GUI.
VWHSlider: Use this mode when interacting with horizontal slider controls on the plug-ins GUI.
VWVSlider: Use this mode when interacting with vertically slider controls on the plug-ins GUI.
Solo While in V-Window Mode, pressing the Solo button will pin the mouse location and revert to that location any time the fader is touched. Once the fader is released, the mouse is also returned to that pin position. This way it is very easy to pin a parameter and instantly control it without having to worry with the mouse cursor is on the screen.
Select Use the Select button while in V-Window mode to reset the fader position.

Command8 - Logic Pro

Channel Strips
Solo Solos the Channel.
Mute Mutes the Channel.
Select Sets the Channel to the Select state.
Knob Changes the assigned parameter.
Meter Toggles between Right and left channel meter display.
Track Meter Displays metering for tracks. Press Meter button to toggle between left and right meters.
Bank Mode
The assignment buttons are used to assign controls to the Knobs.
Pan (Default) Assigns Pan to knobs.
Send Enables Send editing and selection for buttons A-E.
Insert (Console View) Enables Insert editing for selected track. Use buttons A-E to select plug-in on track to edit.
A Assigns send 1 or 6 for all channels to knobs when in Sends mode. Assigns insert 1 or insert 6 of selected track to knobs when in Insert mode.
B Assigns send 2 or 7 for all channels to knobs when in Sends mode. Assigns insert 2 or insert 7 of selected track to knobs when in Insert mode.
C Assigns send 3 or 8 for all channels to knobs when in Sends mode. Assigns insert 3 or insert 8 of selected track to knobs when in Insert mode.
D Assigns send 4 to knobs when in Sends mode. Assigns insert 4 of selected track to knobs when in Insert mode.
E Assigns send 5 to knobs when in Sends mode. Assigns insert 5 of selected track to knobs when in Insert mode.
EQ Shows EQ Parameters for the selected channel across the LCD.
Insert (Channel View) Displays all inserts for selected track. Touch knob to select Insert for editing.
Pan/Sends/PRE Assigns Sends of selected channel to the knobs.
Flip Flips knobs to faders.
Display Mode Displays values for knob assignment.
Master Faders Toggles last Channel Fader to be Master Fader
Transport
Play Starts playhead at current position in Timeline.
Stop Stops playhead at current position in Timeline.
Record Starts Record Mode for playhead
Rewind Move playhead backwards in Timeline.
Fast Forward Moves playhead forward in Timeline.
RTZ Moves playhead to beginning of Timeline.
Shift+RTZ Moves playhead to end of Timeline.
Loop Play/Loop Rec Toggles Loop mode for loop selection in Timeline.
Quick Punch Toggles Punch mode for selection in Timeline.
Counter Displays Counter for current session.
Utility
Undo Press to undo the last edit.
Shift+Undo Press to redo edit.
Enter Confirm selection
Navigation
Nudge Sets Left and Right cursors to scroll tracks left and right for channel mixer.
Bank Sets Left and Right cursors to bank tracks left and right for channel mixer.
Up Scrolls to next track in Arrangement.
Down Scrolls to previous track in Arrangement.
Left Scroll to previous track in MIxer.
Right Scroll to next track in Mixer.
Zoom Enables Zoom mode for the cursor keys. Left/Right zooms horizontal for the Arrangement window. Up/Down zooms vertical for the Arrangement window.
MemLoc Enables Marker Mode for the cursor keys. Left/Right navigate between marker, Down creates marker at playhead position.
Window Buttons
Mix Displays Mixer Window
Edit Displays Arrange Window
Modifiers
Shift Enables Shift Modifier.
Option Enables Option Modifier.
Control Enables Control Modifier.
Command Enables Command Modifier.

Command8 - Ableton Live

Channel Strips
Solo Solos the Channel.
Mute Mutes the Channel.
Auto Cycles through Automation modes on the select
Select Sets the Channel to the Select state.
Knob Changes the assigned parameter.
Knob Button Changes the assigned parameter.
Track Meters Displays Stereo metering for tracks.
Bank Mode
The assignment buttons are used to assign controls to the Knobs.
Pan (Default) Assigns Pan to knobs.
Send A Assigns Send 1 to knobs. Assigns Send 6 to knobs when F-J is enabled. Use Channel Bar Scroll Left and Right to switch parameters.
Send B Assigns Send 2 to knobs. Assigns Send 7 to knobs when F-J is enabled. Use Channel Bar Scroll Left and Right to switch parameters.
Send C Assigns Send 3 to knobs. Assigns Send 8 to knobs when F-J is enabled. Use Channel Bar Scroll Left and Right to switch parameters.
Send D Assigns Send 4 to knobs. Use Channel Bar Scroll Left and Right to switch parameters.
Send E Assigns Send 5 to knobs. Use Channel Bar Scroll Left and Right to switch parameters.
F-J Toggles between Sends 1-5 and 6-8 for Send A-E buttons.
Input Shows Channel Inputs across LCD
Output Shows Channel Outputs across LCD.
Assign Enables knobs to change source or destination for Sends, Input, or Output mode. Use knob button to confirm selection.
PrePost Sets knob buttons to PrePost mode when in Sends Mode.
Send Mute Sets knob buttons to Send Mute mode when in Sends Mode.
Flip Flips knobs to faders.
Show Channel Names Shows track name in Channel LCD when held down.
Show Values Shows value for assigned knob parameter.
Master Faders Toggles last Channel Fader to be Master Fader
Transport
Play Starts playhead at current position in Timeline.
Stop Stops playhead at current position in Timeline.
Record Starts Record Mode for playhead
Rewind Move playhead backwards in Timeline.
Fast Forward Moves playhead forward in Timeline.
RTZ Moves playhead to beginning of Timeline.
GTE Moves playhead to end of Timeline.
Pre Roll Enables Count-In
In Sets start point of selection in Timeline.
Out Sets end point of selection in Timeline.
Shift+In Sets drop start point of selection in Timeline.
Shift+Out Sets drop end point of selection in Timeline.
Option+In Goest to start of loop region.
Option+Out Goes to end of loop region.
Loop Play/Loop Rec Toggles Loop mode for loop selection in Timeline.
Quick Punch Toggles Punch mode for selection in Timeline.
Audition Toggles Replace
Ext Trans Toggles Metronome
Counter Mode Select Changes Counter Mode in Counter LCD.
Counter Displays Counter for current session.
Utility
Save Press the Save button to save.
Press Shift + Save button to open the Save As dialog.
Undo Press to undo the last edit.
Shift+Undo Press to redo edit.
Enter Confirm selection
Cancel Cancel selection
Solo Clear Clears all track Solos in project.
Group Buttons
Suspend Toggles group suspend.
Navigation
Bank Left Banks 24 tracks left/Scrolls 1 track left in Nudge mode
Bank Right Banks 24 tracks right/Scrolls 1 track right in Nudge mode
Nudge Toggles Nudge mode On/Off
Up Scrolls to next track in Arrangement.
Down Scrolls to previous track in Arrangement.
Left Scroll to previous track in MIxer.
Right Scroll to next track in Mixer.
Zoom Enables Zoom mode for the cursor keys. Left/Right zooms horizontal for the Arrangement window. Up/Down zooms vertical for the Arrangement window.
Navigate Enables Marker Mode for the cursor keys. Left/Right navigate between marker, Down creates marker at playhead position.
Window Buttons
Mix Displays Mixer Window
Edit Displays Arrange Window
MemLoc Displays Marker Window
Transport Displays Transport
Edit
Copy Copy selected region in Arrange Window
Delete Deletes selected region in Arrange Window
Cut Cuts selected region in Arrange Window
Paste Pastes region in Arrange Window
Modifiers
Shift Enables Shift Modifier.
Option Enables Option Modifier.
Control Enables Control Modifier.
Command Enables Command Modifier.

Command 8 - Studio One / Fender Studio

Channel Strips
Record Arms the assigned audio track of the Channel.
Solo Solos the Channel (with Momentary mode).
Mute Mutes the Channel (with Momentary mode).
Auto Cycles through Automation modes on track.
Select Sets the Channel to the Select state.
Knob Changes the assigned parameter.
Default+Select Sets assigned parameter to default value
Display Mode Changes display on LCD to show parameters
Track Meters Displays metering for tracks. Currenlty supports one meter per channel.
Bank Mode
The assignment buttons are used to assign controls to the Knobs.
Pan (Default) Shows the track names in the LED strip and assigns Knobs to Channel Pan.
Send Assigns Knob to Sends
First Press - Modify send level of the selected channel.
Additional Presses - Cycle through sends 1-8 to modify sends 1-8 for all tracks.
A Default Channel View
B Channel Type Selection. (Change with Channel View Buttons)
C Automation Mode Selection. (Change with Channel View Buttons)
D Soft Keys Mode (Use channel view buttons)
Insert Sets the V-Pots to Control Link mode.
Flip Flips knob assignment to faders.
Master Faders Toggles last Channel Fader to be Master Fader
Channel Type Selection Mode
When Console Mode B is selected, Channel View buttons change Channel Type
EQ Sets Channel view to All Types.
Dynamics Sets Channel view to Audio Tracks only.
Insert (Channel View) Sets Channel view to Instrument tracks only.
Send/Pre Sets Channel View to FX Tracks only.
Page Left Sets Channel View to Bus Track only.
Page Right Sets Channel View to Output channels only.
Master Bypass Sets Channel View to Remote tracks only.
Automation Mode
When Console Mode C is selected, Channel View buttons change Automation
EQ Sets Automation to Off for the selected Channel.
Dynamics Sets Automation to Read mode for the selected Channel.
Insert (Channel View) Sets Automation to Touch mode for the selected Channel.
Send/Pre Sets Automation to Latch mode for the selected Channel.
Page Left Sets Automation to Write mode for the selected Channel.
Soft Keys Mode
When Console Mode C is selected, Channel View buttons act as Soft Keys
EQ F1
Dynamics F2
Insert (Channel View) F3
Send/Pre F4
Page Left F5
Page Right F6
Master Bypass F7
ESC F8
Transport
Play Starts playhead at current position in Timeline.
Stop Stops playhead at current position in Timeline. (Press twice to Return to Zero)
Record Starts Record Mode for playhead
Rewind Move playhead backwards in Timeline.
Fast Forward Moves playhead forward in Timeline.
RTZ Return to zero.
Loop Play Toggles Loop mode for loop selection in Timeline.
Quick Punch Toggles Punch mode for selection in Timeline.
Counter Displays Counter for current session. Counter mode can be changed in DAW.
Navigation
The cursor buttons operate in several modes.
Zoom Horizontal and vertical zoom when zoom button is enabled.
Bank Enables Left/Right arrows to bank tracks.
Nudge Enables Left/Right arrows to scroll tracks.
Up Moves up track selection or list/Zooms out vertically
Down Moves down track selection or list/Zooms in vertically
Left Moves up track selection or list/Zooms out horizontally
Right Moves down track selection or list/Zooms in horizontally
Utility
Save Press the Save button to save.
Press Shift + Save button to open the Save As dialog.
Undo Press to undo the last edit.
Enter Confirm selection
V-Window Mode
With the V-Window feature, users can instantly control any plug-ins or controls on screen through their control surface's channel strip with a touch of a button.
Master Fader Press once to enable Master Fader control. Press a second time to enable V-Window mode for the 24th channel fader. Press a 3rd time to cycle back to basic channel control.
Mute While in V-Window mode, the Mute button on the last channel strip will cycle through the various V-Window Modes which are listed below:
VButton: Use this mode to interact with button controls. The mouse will stay in its place and activate a button press when the fader is touched.
VButtonSet: Use this mode to create and cycle through different button set points. With the mouse hovering above the on screen button's position press Shift+Solo on the control surface to set a Pin at that location. Using the fader in this mode will cylce between multiple Pins to use with VButton mode.
VWKnob: Use this mode when interacting with knob controls on the plug-ins GUI.
VWHSlider: Use this mode when interacting with horizontal slider controls on the plug-ins GUI.
VWVSlider: Use this mode when interacting with vertically slider controls on the plug-ins GUI.
Solo While in V-Window Mode, pressing the Solo button will pin the mouse location and revert to that location any time the fader is touched. Once the fader is released, the mouse is also returned to that pin position. This way it is very easy to pin a parameter and instantly control it without having to worry with the mouse cursor is on the screen.
Select Use the Select button while in V-Window mode to reset the fader position.

Command8 - Cubase/Nuendo

Channel Strips
Record Arms the assigned audio track of the Channel.
Solo Solos the Channel.
Mute Mutes the Channel.
Select Sets the Channel to the Select state. Acts as Record enable when the record button is enabled.
Knob Changes the assigned parameter.
Record Toggles Record enable mode for channel select buttons.
Meter Toggles meter display to left or right meter.
Track Meters Displays Stereo metering for tracks.
Bank Mode
The assignment buttons are used to assign controls to the Knobs.
Pan (Default) Shows pan position in LED Strip. Knob controls pan position.
Send A Assigns Send 1 to knobs. Assigns Send 6 to knobs when current assignment is Send 1. Use Channel Bar Scroll Left and Right to switch parameters.
Send B Assigns Send 2 to knobs. Assigns Send 7 to knobs when current assignment is Send 2. Use Channel Bar Scroll Left and Right to switch parameters.
Send C Assigns Send 3 to knobs. Assigns Send 8 to knobs when current assignment is Send 3. Use Channel Bar Scroll Left and Right to switch parameters.
Send D Assigns Send 4 to knobs. Use Channel Bar Scroll Left and Right to switch parameters.
Send E Assigns Send 5 to knobs. Use Channel Bar Scroll Left and Right to switch parameters.
Send parameters 1st parameter is Send level.
2nd parameter is bypass for Send assignment.
3rd parameter is Pre/Post.
4th parameter is pan for send.
5th parameter is Send assignment.
6th parameter is Master send bypass for channel.
Monitor Assign channel parameters to knobs. Use Channel bar scroll Left and Right to cycle through parameters.
Channel Parameters 1st parameter is channel output.
2nd parameter is input monitoring on channel.
3rd parameter is channel input.
4th parameter is pre-gain.
5th parameter is phase invert.
Flip Flips knobs to faders.
Master Faders Enables Master Fader control on the 7th channel of Command
Transport
Play Starts playhead at current position in Timeline.
Stop Stops playhead at current position in Timeline.
Record Starts Record Mode for playhead
Rewind Move playhead backwards in Timeline.
Fast Forward Moves playhead forward in Timeline.
RTZ Returns playhead to beginning of Timeline.
Shift+RTZ Sends playhead to end of Timeline.
Loop Play/Loop Rec Toggles Loop mode for loop selection in Timeline.
Quick Punch Toggles Punch mode for selection in Timeline.
Counter Displays Counter for current session. Counter mode can be changed in DAW.
Utility
Undo Undo the last action.
Shift+Undo Redo the last action.
Window Buttons
Mix Opens MixConsole Window
Navigation
Bank Left Banks tracks left/Scrolls 1 track left in Nudge mode
Bank Right Banks tracks right/Scrolls 1 track right in Nudge mode
Nudge Toggles Nudge mode On/Off
There are several different modes available for the cursor keys and wheel.
MemLoc Enables Marker Mode. Use Wheel or Left/Right cursor keys to navigate between markers. Down cursor key creates marker at playhead.
Zoom Enables Zoom mode for the wheel and cursor keys.
Zoom+Shift Enables Track Zoom for the wheel and cursor keys. Track zoom increases/decreases track height.
Zoom+Option Enables Wave Zoom for the wheel and cursor keys. Wave zoom increases waveform view in region.

Command8 - LUNA

Bank Mode
There are two ways to use the Send Mode button to assign Sends to the knobs.
Send(Hold)+Default+Channel Select Single Sends V-Pot mode. Press and hold the Send A button and then press the specified knob button to display that Send across all V-pots.
Send Expanded Sends V-Pot mode. Press Send A to cycle through Send overview and detail pages, which allow control over the selected track's parameters.
Pan Assign Pan position to knobs.
Flip Flips V-Pot control to Faders.
Master Faders Press first time to toggle Master fader to be assigned to last fader on controller. Master Fader light will be solid in this mode.
Press second time to enable V-Window feature for last fader on controller. Master Fader Light will be flashing in this mode.
Channel Strips
Record Arms the assigned audio track of the Channel.
Solo Solos the Channel.
Mute Mutes the Channel.
Select Sets the Channel to the Select state.
Knob Changes the assigned parameter.
Knob Button Sets assigned parameter to default value
Solo Clear When lit, pressing clears all active solos.
Track Meters Displays metering for tracks. Currenlty supports one meter per channel.
Track View
A Standard Track view and control
B Automation view and control for selected tracks.
Transport
Play Starts playhead at current position in Timeline.
Stop Stops playhead at current position in Timeline. (Press twice to Return to Zero)
Record Starts Record Mode for playhead
Rewind Move playhead backwards in Timeline.
Fast Forward Moves playhead forward in Timeline.
Counter Displays Counter for current session. Counter mode can be changed in DAW.
Navigation
The cursor buttons operate in several modes.
Bank Toggles Bank mode On/Off for Left/Right Arrows
Nudge Toggles Nudge mode On/Off for Left/Right Arrows
Zoom Horizontal and vertical zoom when zoom button is enabled.
Up Moves up track selection or list/Zooms out vertically
Down Moves down track selection or list/Zooms in vertically
Left Moves up track selection or list/Zooms out horizontally
Right Moves down track selection or list/Zooms in horizontally
Utility
Save Press the Save button to save.
Press Shift + Save button to open the Save As dialog.
Undo Press to undo the last edit.
Enter Confirm selection
V-Window Mode
With the V-Window feature, users can instantly control any plug-ins or controls on screen through their control surface's channel strip with a touch of a button.
Master Fader Press once to enable Master Fader control. Press a second time to enable V-Window mode for the 24th channel fader. Press a 3rd time to cycle back to basic channel control.
Mute While in V-Window mode, the Mute button on the last channel strip will cycle through the various V-Window Modes which are listed below:
VButton: Use this mode to interact with button controls. The mouse will stay in its place and activate a button press when the fader is touched.
VButtonSet: Use this mode to create and cycle through different button set points. With the mouse hovering above the on screen button's position press Shift+Solo on the control surface to set a Pin at that location. Using the fader in this mode will cylce between multiple Pins to use with VButton mode.
VWKnob: Use this mode when interacting with knob controls on the plug-ins GUI.
VWHSlider: Use this mode when interacting with horizontal slider controls on the plug-ins GUI.
VWVSlider: Use this mode when interacting with vertically slider controls on the plug-ins GUI.
Solo While in V-Window Mode, pressing the Solo button will pin the mouse location and revert to that location any time the fader is touched. Once the fader is released, the mouse is also returned to that pin position. This way it is very easy to pin a parameter and instantly control it without having to worry with the mouse cursor is on the screen.
Select Use the Select button while in V-Window mode to reset the fader position.

003 - Logic Pro

Channel Strips
Solo Solos the Channel.
Mute Mutes the Channel.
Select Sets the Channel to the Select state.
Knob Changes the assigned parameter.
Meter Toggles between Right and left channel meter display.
Track Meter Displays metering for tracks. Press Meter button to toggle between left and right meters.
Bank Mode
The assignment buttons are used to assign controls to the Knobs.
Pan (Default) Assigns Pan to knobs.
Send Enables Send editing and selection for buttons A-E.
Insert (Console View) Enables Insert editing for selected track. Use buttons A-E to select plug-in on track to edit.
A Assigns send 1 or 6 for all channels to knobs when in Sends mode. Assigns insert 1 or insert 6 of selected track to knobs when in Insert mode.
B Assigns send 2 or 7 for all channels to knobs when in Sends mode. Assigns insert 2 or insert 7 of selected track to knobs when in Insert mode.
C Assigns send 3 or 8 for all channels to knobs when in Sends mode. Assigns insert 3 or insert 8 of selected track to knobs when in Insert mode.
D Assigns send 4 to knobs when in Sends mode. Assigns insert 4 of selected track to knobs when in Insert mode.
E Assigns send 5 to knobs when in Sends mode. Assigns insert 5 of selected track to knobs when in Insert mode.
EQ Shows EQ Parameters for the selected channel across the LCD.
Insert (Channel View) Displays all inserts for selected track. Touch knob to select Insert for editing.
Pan/Sends/PRE Assigns Sends of selected channel to the knobs.
Flip Flips knobs to faders.
Display Mode Displays values for knob assignment.
Master Faders Toggles last Channel Fader to be Master Fader
Transport
Play Starts playhead at current position in Timeline.
Stop Stops playhead at current position in Timeline.
Record Starts Record Mode for playhead
Rewind Move playhead backwards in Timeline.
Fast Forward Moves playhead forward in Timeline.
RTZ Moves playhead to beginning of Timeline.
Shift+RTZ Moves playhead to end of Timeline.
Loop Play Toggles Loop mode for loop selection in Timeline.
Quick Punch Toggles Punch mode for selection in Timeline.
Counter Displays Counter for current session.
Utility
Undo Press to undo the last edit.
Shift+Undo Press to redo edit.
Enter Confirm selection
Navigation
Bank Left Banks 24 tracks left/Scrolls 1 track left in Nudge mode
Bank Right Banks 24 tracks right/Scrolls 1 track right in Nudge mode
Nudge Toggles Nudge mode On/Off
Nudge Sets Left and Right cursors to scroll tracks left and right for channel mixer.
Bank Sets Left and Right cursors to bank tracks left and right for channel mixer.
Up Scrolls to next track in Arrangement.
Down Scrolls to previous track in Arrangement.
Left Scroll to previous track in MIxer.
Right Scroll to next track in Mixer.
Zoom Enables Zoom mode for the cursor keys. Left/Right zooms horizontal for the Arrangement window. Up/Down zooms vertical for the Arrangement window.
MemLoc Enables Marker Mode for the cursor keys. Left/Right navigate between marker, Down creates marker at playhead position.
Automation
Read Set the automation for the selected track to Read.
Write Set the automation for the selected track to Write.
Touch Set the automation for the selected track to Touch.
Latch Set the automation for the selected track to Latch.
Window Buttons
Mix Displays Mixer Window
Edit Displays Arrange Window
Modifiers
Shift Enables Shift Modifier.
Option Enables Option Modifier.
Control Enables Control Modifier.
Command Enables Command Modifier.

003 - Ableton Live

Channel Strips
Solo Solos the Channel.
Mute Mutes the Channel.
Auto Cycles through Automation modes on the select
Select Sets the Channel to the Select state.
Knob Changes the assigned parameter.
Knob Button Changes the assigned parameter.
Track Meters Displays Stereo metering for tracks.
Bank Mode
The assignment buttons are used to assign controls to the Knobs.
Pan (Default) Assigns Pan to knobs.
Send A Assigns Send 1 to knobs. Assigns Send 6 to knobs when F-J is enabled. Use Channel Bar Scroll Left and Right to switch parameters.
Send B Assigns Send 2 to knobs. Assigns Send 7 to knobs when F-J is enabled. Use Channel Bar Scroll Left and Right to switch parameters.
Send C Assigns Send 3 to knobs. Assigns Send 8 to knobs when F-J is enabled. Use Channel Bar Scroll Left and Right to switch parameters.
Send D Assigns Send 4 to knobs. Use Channel Bar Scroll Left and Right to switch parameters.
Send E Assigns Send 5 to knobs. Use Channel Bar Scroll Left and Right to switch parameters.
F-J Toggles between Sends 1-5 and 6-8 for Send A-E buttons.
Input Shows Channel Inputs across LCD
Output Shows Channel Outputs across LCD.
Assign Enables knobs to change source or destination for Sends, Input, or Output mode. Use knob button to confirm selection.
PrePost Sets knob buttons to PrePost mode when in Sends Mode.
Send Mute Sets knob buttons to Send Mute mode when in Sends Mode.
Flip Flips knobs to faders.
Show Channel Names Shows track name in Channel LCD when held down.
Show Values Shows value for assigned knob parameter.
Master Faders Toggles last Channel Fader to be Master Fader
Transport
Play Starts playhead at current position in Timeline.
Stop Stops playhead at current position in Timeline.
Record Starts Record Mode for playhead
Rewind Move playhead backwards in Timeline.
Fast Forward Moves playhead forward in Timeline.
RTZ Moves playhead to beginning of Timeline.
GTE Moves playhead to end of Timeline.
Pre Roll Enables Count-In
In Sets start point of selection in Timeline.
Out Sets end point of selection in Timeline.
Shift+In Sets drop start point of selection in Timeline.
Shift+Out Sets drop end point of selection in Timeline.
Option+In Goest to start of loop region.
Option+Out Goes to end of loop region.
Loop Play/Loop Rec Toggles Loop mode for loop selection in Timeline.
Quick Punch Toggles Punch mode for selection in Timeline.
Audition Toggles Replace
Ext Trans Toggles Metronome
Counter Mode Select Changes Counter Mode in Counter LCD.
Counter Displays Counter for current session.
Utility
Save Press the Save button to save.
Press Shift + Save button to open the Save As dialog.
Undo Press to undo the last edit.
Shift+Undo Press to redo edit.
Enter Confirm selection
Cancel Cancel selection
Solo Clear Clears all track Solos in project.
Group Buttons
Suspend Toggles group suspend.
Navigation
Bank Left Banks 24 tracks left/Scrolls 1 track left in Nudge mode
Bank Right Banks 24 tracks right/Scrolls 1 track right in Nudge mode
Nudge Toggles Nudge mode On/Off
Up Scrolls to next track in Arrangement.
Down Scrolls to previous track in Arrangement.
Left Scroll to previous track in MIxer.
Right Scroll to next track in Mixer.
Zoom Enables Zoom mode for the cursor keys. Left/Right zooms horizontal for the Arrangement window. Up/Down zooms vertical for the Arrangement window.
Navigate Enables Marker Mode for the cursor keys. Left/Right navigate between marker, Down creates marker at playhead position.
Window Buttons
Mix Displays Mixer Window
Edit Displays Arrange Window
MemLoc Displays Marker Window
Transport Displays Transport
Edit
Copy Copy selected region in Arrange Window
Delete Deletes selected region in Arrange Window
Cut Cuts selected region in Arrange Window
Paste Pastes region in Arrange Window
Modifiers
Shift Enables Shift Modifier.
Option Enables Option Modifier.
Control Enables Control Modifier.
Command Enables Command Modifier.

003 - Studio One / Fender Studio

Channel Strips
Record Arms the assigned audio track of the Channel.
Solo Solos the Channel (with Momentary mode).
Mute Mutes the Channel (with Momentary mode).
Auto Cycles through Automation modes on track.
Select Sets the Channel to the Select state.
Knob Changes the assigned parameter.
Default+Select Sets assigned parameter to default value
Display Mode Changes display on LCD to show parameters
Track Meters Displays metering for tracks. Currenlty supports one meter per channel.
Bank Mode
The assignment buttons are used to assign controls to the Knobs.
Pan (Default) Shows the track names in the LED strip and assigns Knobs to Channel Pan.
Send A,B,C,D,E Assigns Knob to Sends
First Press - Modify send level of the selected channel.
Additional Presses - Cycle through sends 1-8 to modify sends 1-8 for all tracks.
Input Modify track parameters of the selected Channel. (Press Display Mode to show Parameters)
Bypass all plug-ins.
Monitoring on/off.
Select Channel Input.
Select Channel Output.
Bypass Sends 1-4.
Master Bypass Bypass for Inserts 1-8 of the selected Channel.
Insert Sets the V-Pots to Control Link mode.
Flip Flips knob assignment to faders.
Master Faders Toggles last Channel Fader to be Master Fader
Automation
Write Sets Automation to Write mode for the selected Channel.
Touch Sets Automation to Touch mode for the selected Channel.
Latch Sets Automation to Latch mode for the selected Channel.
Read Sets Automation to Read mode for the selected Channel.
Transport
Play Starts playhead at current position in Timeline.
Stop Stops playhead at current position in Timeline. (Press twice to Return to Zero)
Record Starts Record Mode for playhead
Rewind Move playhead backwards in Timeline.
Fast Forward Moves playhead forward in Timeline.
RTZ Return to zero.
Loop Play Toggles Loop mode for loop selection in Timeline.
Quick Punch Toggles Punch mode for selection in Timeline.
Counter Displays Counter for current session. Counter mode can be changed in DAW.
Navigation
The cursor buttons operate in several modes.
Zoom Horizontal and vertical zoom when zoom button is enabled.
Bank Enables Left/Right arrows to bank tracks.
Nudge Enables Left/Right arrows to scroll tracks.
Up Moves up track selection or list/Zooms out vertically
Down Moves down track selection or list/Zooms in vertically
Left Moves up track selection or list/Zooms out horizontally
Right Moves down track selection or list/Zooms in horizontally
Utility
Save Press the Save button to save.
Press Shift + Save button to open the Save As dialog.
Undo Press to undo the last edit.
Enter Confirm selection
V-Window Mode
With the V-Window feature, users can instantly control any plug-ins or controls on screen through their control surface's channel strip with a touch of a button.
Master Fader Press once to enable Master Fader control. Press a second time to enable V-Window mode for the 24th channel fader. Press a 3rd time to cycle back to basic channel control.
Mute While in V-Window mode, the Mute button on the last channel strip will cycle through the various V-Window Modes which are listed below:
VButton: Use this mode to interact with button controls. The mouse will stay in its place and activate a button press when the fader is touched.
VButtonSet: Use this mode to create and cycle through different button set points. With the mouse hovering above the on screen button's position press Shift+Solo on the control surface to set a Pin at that location. Using the fader in this mode will cylce between multiple Pins to use with VButton mode.
VWKnob: Use this mode when interacting with knob controls on the plug-ins GUI.
VWHSlider: Use this mode when interacting with horizontal slider controls on the plug-ins GUI.
VWVSlider: Use this mode when interacting with vertically slider controls on the plug-ins GUI.
Solo While in V-Window Mode, pressing the Solo button will pin the mouse location and revert to that location any time the fader is touched. Once the fader is released, the mouse is also returned to that pin position. This way it is very easy to pin a parameter and instantly control it without having to worry with the mouse cursor is on the screen.
Select Use the Select button while in V-Window mode to reset the fader position.

003 - Cubase/Nuendo

Channel Strips
Record Arms the assigned audio track of the Channel.
Solo Solos the Channel.
Mute Mutes the Channel.
Select Sets the Channel to the Select state. Acts as Record enable when the record button is enabled.
Knob Changes the assigned parameter.
Record Toggles Record enable mode for channel select buttons.
Meter Toggles meter display to left or right meter.
Track Meters Displays Stereo metering for tracks.
Bank Mode
The assignment buttons are used to assign controls to the Knobs.
Pan (Default) Shows pan position in LED Strip. Knob controls pan position.
Send A Assigns Send 1 to knobs. Assigns Send 6 to knobs when current assignment is Send 1. Use Channel Bar Scroll Left and Right to switch parameters.
Send B Assigns Send 2 to knobs. Assigns Send 7 to knobs when current assignment is Send 2. Use Channel Bar Scroll Left and Right to switch parameters.
Send C Assigns Send 3 to knobs. Assigns Send 8 to knobs when current assignment is Send 3. Use Channel Bar Scroll Left and Right to switch parameters.
Send D Assigns Send 4 to knobs. Use Channel Bar Scroll Left and Right to switch parameters.
Send E Assigns Send 5 to knobs. Use Channel Bar Scroll Left and Right to switch parameters.
Send parameters 1st parameter is Send level.
2nd parameter is bypass for Send assignment.
3rd parameter is Pre/Post.
4th parameter is pan for send.
5th parameter is Send assignment.
6th parameter is Master send bypass for channel.
Monitor Assign channel parameters to knobs. Use Channel bar scroll Left and Right to cycle through parameters.
Channel Parameters 1st parameter is channel output.
2nd parameter is input monitoring on channel.
3rd parameter is channel input.
4th parameter is pre-gain.
5th parameter is phase invert.
Insert Assigns knobs to edit selected track's inserts.
Flip Flips knobs to faders.
Master Faders Enables Master Fader control on the 7th channel of Command
Automation
Write
Read
Touch
Latch
Transport
Play Starts playhead at current position in Timeline.
Stop Stops playhead at current position in Timeline.
Record Starts Record Mode for playhead
Rewind Move playhead backwards in Timeline.
Fast Forward Moves playhead forward in Timeline.
RTZ Returns playhead to beginning of Timeline.
Shift+RTZ Sends playhead to end of Timeline.
Loop Play Toggles Loop mode for loop selection in Timeline.
Quick Punch Toggles Punch mode for selection in Timeline.
Counter Displays Counter for current session. Counter mode can be changed in DAW.
Utility
Undo Undo the last action.
Shift+Undo Redo the last action.
Save Save the current session.
Window Buttons
Mix Opens MixConsole Window
Navigation
Bank Left Banks tracks left/Scrolls 1 track left in Nudge mode
Bank Right Banks tracks right/Scrolls 1 track right in Nudge mode
Nudge Toggles Nudge mode On/Off
There are several different modes available for the cursor keys and wheel.
MemLoc Enables Marker Mode. Use Wheel or Left/Right cursor keys to navigate between markers. Down cursor key creates marker at playhead.
Zoom Enables Zoom mode for the wheel and cursor keys.
Zoom+Shift Enables Track Zoom for the wheel and cursor keys. Track zoom increases/decreases track height.
Zoom+Option Enables Wave Zoom for the wheel and cursor keys. Wave zoom increases waveform view in region.

003 - LUNA

Bank Mode
There are two ways to use the Send Mode button to assign Sends to the knobs.
Send(Hold)+Default+Channel Select Single Sends V-Pot mode. Press and hold the Send A button and then press the specified knob button to display that Send across all V-pots.
Send Expanded Sends V-Pot mode. Press Send A to cycle through Send overview and detail pages, which allow control over the selected track's parameters.
Pan Assign Pan position to knobs.
Flip Flips V-Pot control to Faders.
Master Faders Press first time to toggle Master fader to be assigned to last fader on controller. Master Fader light will be solid in this mode.
Press second time to enable V-Window feature for last fader on controller. Master Fader Light will be flashing in this mode.
Track Buttons
Record Arms the assigned audio track of the Channel.
Solo Solos the Channel.
Mute Mutes the Channel.
Select Sets the Channel to the Select state.
Knob Changes the assigned parameter.
Knob Button Sets assigned parameter to default value
Solo Clear When lit, pressing clears all active solos.
Track Meters Displays metering for tracks. Currenlty supports one meter per channel.
Automation Buttons
Read Sets Automation to Read mode for the selected Channel.
Touch Sets Automation to Touch mode for the selected Channel.
Latch Sets Automation to Latch mode for the selected Channel.
Off Toggles Trim Mode for the selected Channel.
Transport
Play Starts playhead at current position in Timeline.
Stop Stops playhead at current position in Timeline. (Press twice to Return to Zero)
Record Starts Record Mode for playhead
Rewind Move playhead backwards in Timeline.
Fast Forward Moves playhead forward in Timeline.
Counter Displays Counter for current session. Counter mode can be changed in DAW.
Cursor Buttons
The cursor buttons operate in several modes.
Bank Toggles Bank mode On/Off for Left/Right Arrows
Nudge Toggles Nudge mode On/Off for Left/Right Arrows
Zoom Horizontal and vertical zoom when zoom button is enabled.
Up Moves up track selection or list/Zooms out vertically
Down Moves down track selection or list/Zooms in vertically
Left Moves up track selection or list/Zooms out horizontally
Right Moves down track selection or list/Zooms in horizontally
Utility
Save Press the Save button to save.
Press Shift + Save button to open the Save As dialog.
Undo Press to undo the last edit.
Enter Confirm selection
V-Window Mode
With the V-Window feature, users can instantly control any plug-ins or controls on screen through their control surface's channel strip with a touch of a button.
Master Fader Press once to enable Master Fader control. Press a second time to enable V-Window mode for the 24th channel fader. Press a 3rd time to cycle back to basic channel control.
Mute While in V-Window mode, the Mute button on the last channel strip will cycle through the various V-Window Modes which are listed below:
VButton: Use this mode to interact with button controls. The mouse will stay in its place and activate a button press when the fader is touched.
VButtonSet: Use this mode to create and cycle through different button set points. With the mouse hovering above the on screen button's position press Shift+Solo on the control surface to set a Pin at that location. Using the fader in this mode will cylce between multiple Pins to use with VButton mode.
VWKnob: Use this mode when interacting with knob controls on the plug-ins GUI.
VWHSlider: Use this mode when interacting with horizontal slider controls on the plug-ins GUI.
VWVSlider: Use this mode when interacting with vertically slider controls on the plug-ins GUI.
Solo While in V-Window Mode, pressing the Solo button will pin the mouse location and revert to that location any time the fader is touched. Once the fader is released, the mouse is also returned to that pin position. This way it is very easy to pin a parameter and instantly control it without having to worry with the mouse cursor is on the screen.
Select Use the Select button while in V-Window mode to reset the fader position.