In Insert Mode the Knob button will toggle bypass on the plug-in.
Track Meters
Displays metering for tracks. Currenlty supports one meter per channel.
Bank Mode
The assignment buttons are used to assign controls to the Knobs.
Pan (Default)
Shows the track names in the LED strip and assigns Knobs to Channel Pan.
Send A,B,C,D,E
Assigns Knob to Sends
When Bank assignment is set to Sends. Up/Down cursor keys cycle through send slots.
Input, Output
Opens bank assignment options. Use the knob buttons to select assignment for knobs.
Params
Assigns Insert mode for the knobs. Use the knobs to select plug-in to insert on channel.
When Bank assignment is set to inserts. Up/Down cursor keys cycle through insert slots.
Assign
While in Insert Mode, hold down the In/Edit button and press the knob button on the
Safe
Hold down and use the knob to cycle through presets for the selected plug-in.
Flip
Flips knob assignment to faders.
Master Faders
Toggles last Channel Fader to be Master Fader
Automation
To Assign automation to a channel. Hold down the automation button and press the Channel button you wish to assign automation to.
Must be in Pan or Send Assignment mode for Automation Assignment to Work.
Write
Sets Automation to Write mode for the selected Channel.
Touch
Sets Automation to Touch mode for the selected Channel.
Latch
Sets Automation to Latch mode for the selected Channel.
Read
Sets Automation to Read mode for the selected Channel.
Trim
Sets Automation to Trim Touch mode for selected Channel.
Transport
Play
Starts playhead at current position in Timeline.
Stop
Stops playhead at current position in Timeline. (Press twice to Return to Zero)
Record
Starts Record Mode for playhead
Rewind
Move playhead backwards in Timeline.
Fast Forward
Moves playhead forward in Timeline.
Audition
Toggles Audible Mode
Online
Toggles Metronome
In
Set Left
Out
Set Right
Quick Punch
Set Left Drop
Counter
Displays Counter for current session. Counter mode can be changed in DAW.
Navigation
Bank Left
Banks tracks left/Scrolls 1 track left in Nudge mode
Bank Right
Banks tracks right/Scrolls 1 track right in Nudge mode
Nudge
Toggles Nudge mode On/Off
The cursor buttons operate in several modes.
Zoom
Horizontal and vertical zoom when zoom button is enabled.
Up
Moves up track selection or list/Zooms out vertically
When Bank assignment is set to inserts. Up cursor key cycle through insert slots.
When Bank assignment is set to sends. Up cursor key cycle through send slots.
Down
Moves down track selection or list/Zooms in vertically
When Bank assignment is set to inserts. Down cursor key cycle through insert slots.
When Bank assignment is set to sends. Down cursor key cycle through insert slots.
Left
Moves up track selection or list/Zooms out horizontally
Right
Moves down track selection or list/Zooms in horizontally
Utility
Save
Press the Save button to save.
Press Shift + Save button to open the Save As dialog.
Undo
Press to undo the last edit.
Enter
Confirm selection
Cancel
Cancel selection
V-Window Mode
With the V-Window feature, users can instantly control any plug-ins or controls on screen through their control surface's channel strip with a touch of a button.
Master Fader
Press once to enable Master Fader control. Press a second time to enable V-Window mode for the 24th channel fader. Press a 3rd time to cycle back to basic channel control.
Mute
While in V-Window mode, the Mute button on the last channel strip will cycle through the various V-Window Modes which are listed below:
VButton: Use this mode to interact with button controls. The mouse will stay in its place and activate a button press when the fader is touched.
VButtonSet: Use this mode to create and cycle through different button set points. With the mouse hovering above the on screen button's position press Shift+Solo on the control surface to set a Pin at that location. Using the fader in this mode will cylce between multiple Pins to use with VButton mode.
VWKnob: Use this mode when interacting with knob controls on the plug-ins GUI.
VWHSlider: Use this mode when interacting with horizontal slider controls on the plug-ins GUI.
VWVSlider: Use this mode when interacting with vertically slider controls on the plug-ins GUI.
Solo
While in V-Window Mode, pressing the Solo button will pin the mouse location and revert to that location any time the fader is touched. Once the fader is released, the mouse is also returned to that pin position. This way it is very easy to pin a parameter and instantly control it without having to worry with the mouse cursor is on the screen.
Select
Use the Select button while in V-Window mode to reset the fader position.
MIDI Mode
MIDI Mode converts the surfaces faders, knobs, and buttons into assignable MIDI Controls that can be mapped in the DAW.