Assigns EQ editor for selected channel across channel knobs. Use Channel Bar Scroll buttons to access additional parameters.
Insert
Assigns Plug-in Editor for selected channel across channel knobs. Select plug-in with knob buttons.
Send
Assigns Sends for selected channel across channel knobs.
Record
Arms the assigned audio track of the Channel.
Solo
Solos the Channel.
Mute
Mutes the Channel.
Auto
Cycles through Automation modes on the select
Input (C24)
Toggles Input Monitoring for the channel.
Select
Sets the Channel to the Select state.
Knob
Changes the assigned parameter.
Knob Button
Changes the assigned parameter.
Bank Mode
The assignment buttons are used to assign controls to the Knobs.
Pan (Default)
Assigns Pan to knobs.
Send A
Assigns Send 1 to knobs. Assigns Send 6 to knobs when F-J is enabled. Use Channel Bar Scroll Left and Right to switch parameters.
Send B
Assigns Send 2 to knobs. Assigns Send 7 to knobs when F-J is enabled. Use Channel Bar Scroll Left and Right to switch parameters.
Send C
Assigns Send 3 to knobs. Assigns Send 8 to knobs when F-J is enabled. Use Channel Bar Scroll Left and Right to switch parameters.
Send D
Assigns Send 4 to knobs. Use Channel Bar Scroll Left and Right to switch parameters.
Send E
Assigns Send 5 to knobs. Use Channel Bar Scroll Left and Right to switch parameters.
Input
Shows Channel Inputs across LCD
Output
Shows Channel Outputs across LCD.
Assign
Enables knobs to change source or destination for Sends, Input, or Output mode. Use knob button to confirm selection.
PrePost
Sets knob buttons to PrePost mode when in Sends Mode.
Send Mute
Sets knob buttons to Send Mute mode when in Sends Mode.
Track Meters
Displays Stereo metering for tracks.
Flip
Flips knobs to faders.
Master Faders
Toggles last Channel Fader to be Master Fader
Automation
Read
Sets selected Channel in to Read Mode
Write
Sets selected Channel to Write Mode
Touch
Sets selected Channel to Touch Mode
Latch
Sets selected Channel to Latch Mode
Off
Sets selected Channel to Off Mode
Volume
Toggles Enable for Volume Automation
Pan
Toggles Enable for Pan Automation
Mute
Toggles Enable for Mute Automation
Send LvL
Toggles Enable for Send Level Automation
Plug-In
Toggles Enable for Plug-In Automation
Transport
Play
Starts playhead at current position in Timeline.
Stop
Stops playhead at current position in Timeline.
Record
Starts Record Mode for playhead
Rewind
Move playhead backwards in Timeline.
Fast Forward
Moves playhead forward in Timeline.
RTZ
Moves playhead to beginning of Timeline.
GTE
Moves playhead to end of Timeline.
Pre Roll
Enables Count-In
In
Sets start point of selection in Timeline.
Out
Sets end point of selection in Timeline.
Shift+In
Sets drop start point of selection in Timeline.
Shift+Out
Sets drop end point of selection in Timeline.
Option+In
Goest to start of loop region.
Option+Out
Goes to end of loop region.
Loop Play/Loop Rec
Toggles Loop mode for loop selection in Timeline.
Quick Punch
Toggles Punch mode for selection in Timeline.
Audition
Toggles Replace
Ext Trans
Toggles Metronome
Counter Mode Select
Changes Counter Mode in Counter LCD.
Counter
Displays Counter for current session.
Utility
Save
Press the Save button to save.
Press Shift + Save button to open the Save As dialog.
Undo
Press to undo the last edit.
Shift+Undo
Press to redo edit.
Enter
Confirm selection
Cancel
Cancel selection
Solo Clear
Clears all track Solos in project.
Group Buttons
Suspend
Toggles group suspend.
Navigation
Bank Left
Banks 24 tracks left/Scrolls 1 track left in Nudge mode
Bank Right
Banks 24 tracks right/Scrolls 1 track right in Nudge mode
Nudge
Toggles Nudge mode On/Off
Up
Scrolls to next track in Arrangement.
Down
Scrolls to previous track in Arrangement.
Left
Scroll to previous track in MIxer.
Right
Scroll to next track in Mixer.
Zoom
Enables Zoom mode for the cursor keys. Left/Right zooms horizontal for the Arrangement window. Up/Down zooms vertical for the Arrangement window.
DSP Edit Section
Sends
Assigns DSP Edit section to Sends Mode for Selected Channel.
Insert/Params
Assigns DSP Edit section to Insert mode for Selected Channel.
Assign 1-8
Enables Assign for Send/Insert. Use knobs in DSP Edit section change selection.
Select 1-8
Toggles Pre/Post Mode for Sends. Selects Insert to edit parameters.
Bypass 1-8
Mutes Send. Bypasses Plug-in.
Channel Matrix Section
Goto
Enables Marker mode. Use Matrix keys 1-32 to jump to marker position.
In Marker Mode, cursor keys Left/Right navigate between markers, Down creates marker at playhead position.
1/A
Use to page forward through plug-in parameters when editing in DSP Editor.
2/B
Use to page backwards through plug-in parameters when editing in DSP Editor.
View
Displays Screenset 1
Bank A
Displays Screenset 2
Bank B
Displays Screenset 3
Bank C
Displays Screenset 4
Bank D
Displays Screenset 5
Window Buttons
Mix
Displays Mixer Window
Edit
Displays Arrange Window
MemLoc
Displays Marker Window
Transport
Displays Transport
Status
Displays Event Editor
Edit
Copy
Copy selected region in Arrange Window
Delete
Deletes selected region in Arrange Window
Cut
Cuts selected region in Arrange Window
Paste
Pastes region in Arrange Window
Modifiers
Shift
Enables Shift Modifier.
Option
Enables Option Modifier.
Control
Enables Control Modifier.
Command
Enables Command Modifier.
V-Window Mode
With the V-Window feature, users can instantly control any plug-ins or controls on screen through their control surface's channel strip with a touch of a button.
Master Fader
Press once to enable Master Fader control. Press a second time to enable V-Window mode for the 8th channel fader. Press a 3rd time to cycle back to basic channel control.
Mute
While in V-Window mode, the Mute button on the last channel strip will cycle through the various V-Window Modes which are listed below:
VButton: Use this mode to interact with button controls. The mouse will stay in its place and activate a button press when the fader is touched.
VButtonSet: Use this mode to create and cycle through different button set points. With the mouse hovering above the on screen button's position press Shift+Solo on the control surface to set a Pin at that location. Using the fader in this mode will cylce between multiple Pins to use with VButton mode.
VWKnob: Use this mode when interacting with knob controls on the plug-ins GUI.
VWHSlider: Use this mode when interacting with horizontal slider controls on the plug-ins GUI.
VWVSlider: Use this mode when interacting with vertically slider controls on the plug-ins GUI.
Solo
While in V-Window Mode, pressing the Solo button will pin the mouse location and revert to that location any time the fader is touched. Once the fader is released, the mouse is also returned to that pin position. This way it is very easy to pin a parameter and instantly control it without having to worry with the mouse cursor is on the screen.
Select
Use the Select button while in V-Window mode to reset the fader position.
MIDI Mode
MIDI Mode converts the surfaces faders, knobs, and buttons into assignable MIDI Controls that can be mapped in the DAW.