Displays metering for tracks. Currenlty supports one meter per channel.
Bank Mode
The assignment buttons are used to assign controls to the Knobs.
Pan (Default)
Shows the track names in the LED strip and assigns Knobs to Channel Pan.
Send A,B,C,D,E
Assigns Knob to Sends
First Press - Modify send level of the selected channel.
Additional Presses - Cycle through sends 1-8 to modify sends 1-8 for all tracks.
Input, Output
Modify track parameters of the selected Channel.
Bypass all plug-ins.
Monitoring on/off.
Select Channel Input.
Select Channel Output.
Bypass Sends 1-4.
Master Bypass
Bypass for Inserts 1-8 of the selected Channel.
Insert/Params
Sets the V-Pots to Control Link mode.
Flip
Flips knob assignment to faders.
Show Channel Names
Shows Track names when in Plug-in Edit mode.
Master Faders
Toggles last Channel Fader to be Master Fader
Automation
Write
Sets Automation to Write mode for the selected Channel.
Touch
Sets Automation to Touch mode for the selected Channel.
Latch
Sets Automation to Latch mode for the selected Channel.
Read
Sets Automation to Read mode for the selected Channel.
Off
Sets Automation to Off mode for the selected Channel.
Transport
Play
Starts playhead at current position in Timeline.
Stop
Stops playhead at current position in Timeline. (Press twice to Return to Zero)
Record
Starts Record Mode for playhead
Rewind
Move playhead backwards in Timeline.
Fast Forward
Moves playhead forward in Timeline.
RTZ
Return to zero.
Loop Play/Loop Rec
Toggles Loop mode for loop selection in Timeline.
Quick Punch
Toggles Punch mode for selection in Timeline.
Online
Enables Marker Mode. Use Rewind to go to previous marker/Use Fast forward to go to next marker.
Counter
Displays Counter for current session. Counter mode can be changed in DAW.
Soft Keys
Press Show Values Button to access Views Mode
Mixer View Buttons (Filters tracks shown on Channels)
Knob Button 1
Shows all Studio One Channels.
Knob Button 2
Shows all available Inputs
Knob Button 3
Shows all Audio type tracks
Knob Button 4
Shows all Instrument type tracks
Knob Button 5
Shows all FX type tracks
Knob Button 6
Shows all Bus type tracks
Knob Button 7
Shows all available Outputs
Knob Button 8
Shows all Remote User tracks
Function keys (Keys are predefined but can be modified with Mackie Control Device editor)
F1
Show Inputs
F2
Show Track
F3
Show Mix Console
F4
Open Channel
F5
Add Insert
F6
Add Send
F7
Show Inserts Window
F8
Toggle Floating Window
Navigation
Bank Left
Banks tracks left/Scrolls 1 track left in Nudge mode
Bank Right
Banks tracks right/Scrolls 1 track right in Nudge mode
Nudge
Toggles Nudge mode On/Off
The cursor buttons operate in several modes.
Zoom
Horizontal and vertical zoom when zoom button is enabled.
Up
Moves up track selection or list/Zooms out vertically
Down
Moves down track selection or list/Zooms in vertically
Left
Moves up track selection or list/Zooms out horizontally
Right
Moves down track selection or list/Zooms in horizontally
Utility
Save
Press the Save button to save.
Press Shift + Save button to open the Save As dialog.
Undo
Press to undo the last edit.
Enter
Confirm selection
Cancel
Cancel selection
V-Window Mode
With the V-Window feature, users can instantly control any plug-ins or controls on screen through their control surface's channel strip with a touch of a button.
Master Fader
Press once to enable Master Fader control. Press a second time to enable V-Window mode for the 24th channel fader. Press a 3rd time to cycle back to basic channel control.
Mute
While in V-Window mode, the Mute button on the last channel strip will cycle through the various V-Window Modes which are listed below:
VButton: Use this mode to interact with button controls. The mouse will stay in its place and activate a button press when the fader is touched.
VButtonSet: Use this mode to create and cycle through different button set points. With the mouse hovering above the on screen button's position press Shift+Solo on the control surface to set a Pin at that location. Using the fader in this mode will cylce between multiple Pins to use with VButton mode.
VWKnob: Use this mode when interacting with knob controls on the plug-ins GUI.
VWHSlider: Use this mode when interacting with horizontal slider controls on the plug-ins GUI.
VWVSlider: Use this mode when interacting with vertically slider controls on the plug-ins GUI.
Solo
While in V-Window Mode, pressing the Solo button will pin the mouse location and revert to that location any time the fader is touched. Once the fader is released, the mouse is also returned to that pin position. This way it is very easy to pin a parameter and instantly control it without having to worry with the mouse cursor is on the screen.
Select
Use the Select button while in V-Window mode to reset the fader position.
MIDI Mode
MIDI Mode converts the surfaces faders, knobs, and buttons into assignable MIDI Controls that can be mapped in the DAW.