Assigns EQ editor to knobs for the selected track.
DYN
Assigns DYN editor to knobs for the selected track.
In/Sends
Assigns Sends to knobs for the selected track.
Knob
Changes the assigned parameter.
Knob Button
Sets assigned parameter to default value
When in Plug-In Mode, selects plug-in to edit.
Track Meters
Displays metering for tracks. Currenlty supports one meter per channel.
Bank Mode
The assignment buttons are used to assign controls to the Knobs.
Pan (Default)
Shows the track names in the LED strip and assigns Knobs to Channel Pan.
Send A,B,C,D,E
Assigns Knobs to Sends for selected track.
Use the knob button to toggle the send off/on
Input, Output
Assigns track parameters to the knobs for the selected track.
Trim gain, Monitor Mode, Solo Isolate, Solo Safe, and Phase are available to edit in this mode.
Flip
Flips knob assignment to faders.
Master Faders
Toggles last Channel Fader to be Master Fader
Transport
Play
Starts playhead at current position in Timeline.
Stop
Stops playhead at current position in Timeline. (Press twice to Return to Zero)
Record
Starts Record Mode for playhead
Rewind
Move playhead backwards in Timeline.
Fast Forward
Moves playhead forward in Timeline.
RTZ
Go to Start of Session.
GTE
Go to End of Session.
Loop Play
Start Looped Playback.
Loop Rec
Punch In
Punch
Punch Out
In
Mark In
Out
Mark Out
Audition
Sets Loop from selection
Pre Roll
Sets Punch from selection
Post Roll
Sets Session Start/End from selection
Ext Trans
Toggles Click
Counter Mode Select
Toggles Counter Display
Counter
Displays Counter for current session. Counter mode can be changed in DAW.
Automation
The automation buttons control automation for the selected track
Read
Enables Play Automation for the selected track.
Write
Enables Write Automation for the selected track.
Touch
Enables Touch Automation for the selected track.
Off
Enables Off/Manual Automation for the selected track.
DSP Edit Buttons
The DSP Edit buttons change which tracks are in view.
Assign 1
Shows only MIDI tracks. Press again to return to default Mixer view.
Assign 2
Shows only Audio tracks. Press again to return to default Mixer view.
Assign 3
Shows only Busses. Press again to return to default Mixer view.
Assign 4
Shows only Aux tracks. Press again to return to default Mixer view.
Assign 5
Shows user selected tracks. Press again to return to default Mixer view.
Navigation
Bank Left
Banks tracks left/Scrolls 1 track left in Nudge mode
Bank Right
Banks tracks right/Scrolls 1 track right in Nudge mode
Nudge
Toggles Nudge mode On/Off
The cursor buttons operate in several modes.
Zoom
Press once to enable Zoom Mode
Press twice to enable Navigation Mode.
Press three times to return to normal mode.
Up
Zooms in Vertically when zoom mode is active.
Deletes marker at playhead when Navigation mode is active.
Down
Zooms out Vertically when zoom mode is active.
Creates Marker at playhead when Navigation mode is active.
Left
Zooms out Horizontally when zoom mode is active.
Moves to Previous marker when Navigation mode is active.
Right
Zooms in Horizontally when zoom mode is active.
Moves to Next Marker when Navigation mode is active.
Utility
Undo
Press to undo the last edit.
Shift+Undo
Press to redo edit.
Save
Saves Session
Enter
Acts as Enter key.
Escape
Acts as ESC key.
F3
Select All Tracks.
F4
Deselect All Tracks.
Matrix Buttons
Use the Function Keys editor in the MixBus Mackie Control Protocol Settings Window to assign commands
Go To
Enables Marker Mode for the cursor arrows.
Matrix Button 1
F1
Matrix Button 2
F2
Matrix Button 3
F3
Matrix Button 4
F4
Matrix Button 5
F5
Matrix Button 6
F6
Matrix Button 7
F7
Matrix Button 8
F8
V-Window Mode
With the V-Window feature, users can instantly control any plug-ins or controls on screen through their control surface's channel strip with a touch of a button.
Master Fader
Press once to enable Master Fader control. Press a second time to enable V-Window mode for the 8th channel fader. Press a 3rd time to cycle back to basic channel control.
Mute
While in V-Window mode, the Mute button on the last channel strip will cycle through the various V-Window Modes which are listed below:
VButton: Use this mode to interact with button controls. The mouse will stay in its place and activate a button press when the fader is touched.
VButtonSet: Use this mode to create and cycle through different button set points. With the mouse hovering above the on screen button's position press Shift+Solo on the control surface to set a Pin at that location. Using the fader in this mode will cylce between multiple Pins to use with VButton mode.
VWKnob: Use this mode when interacting with knob controls on the plug-ins GUI.
VWHSlider: Use this mode when interacting with horizontal slider controls on the plug-ins GUI.
VWVSlider: Use this mode when interacting with vertically slider controls on the plug-ins GUI.
Solo
While in V-Window Mode, pressing the Solo button will pin the mouse location and revert to that location any time the fader is touched. Once the fader is released, the mouse is also returned to that pin position. This way it is very easy to pin a parameter and instantly control it without having to worry with the mouse cursor is on the screen.
Select
Use the Select button while in V-Window mode to reset the fader position.
MIDI Mode
MIDI Mode converts the surfaces faders, knobs, and buttons into assignable MIDI Controls that can be mapped in the DAW.